GLKLN
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文(中国大陆) • 中文(台灣) • עברית • azərbaycanca • |
Release status: working
Description | GLKLN designed by Konstantin Gulitski.
|
License | |
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | |
External Link |
Contents
Introduction
The main idea of this printer is to create a new design of a 3D printer with a cubic cartesian scheme which includes as many as possible parts from plastic. I.e. it supports the RepRap concept to create some kind of easy reproducible 3d printer to make it more achievable for a wide engineer society. One of the main concepts is that all plastic parts designed to be printed by one hotend 3d printer without using supports.
License
This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License. To view a copy of this license, visit [1] or send a letter to Creative Commons, PO Box 1866, Mountain View, CA 94042, USA.
Specifications
Working volume (max) | 240mm (X) x 290mm (Y) x 310mm (Z) |
---|---|
Working volume (nominal) | 220mm (X) x 220mm (Y) x 210mm (Z) |
Working materials | PLA, ABS, others |
Nominal Speed | 120mm/sec |
Max Speed | 200 mm/s (depending on the object to be printed) |
Filament | 1.75mm |
Configuration | XYZ Cartesian drive using stepper motors |
Computer interface | USB |
Layer thickness | Adjustable 0.1mm, 0.2mm, 0.3mm, 0.4mm |
Material handling | Two fixed material deposition extruders |
Hotend nozzle size | 0.1mm, 0.2mm, 0.3mm, 0.4mm |
Positioning accuracy | XY 0.1 mm |
Motherboard | Makerbase MKS Gen L V1.0 |
Power supply | 25A/12V DC, 300W |
Firmware | Marlin |
Host SW | Repetier-Host |
Exterior dimensions | 528 mm wide x 541 mm deep x 433 mm high |
Weight | about 18 Kg |
Cost | < $300 (USD) |
Main improvements
The following is a list of the main improvements made upon the Prusa Mendel Iteration 2
- Enhanced frame rigidity (prevents x-axis backlash)
- Easy assembly
- Parametric files for multiple sizes/bearings or bushings
Development
This is the first version that represents the nominal configuration. Several parts planned to be developed such as a cable holder, filament roller holders, ventilation system for hotends. The development of the GLKLN is hosted on the: [2].
History
Variants
Printed Parts
files for the printed parts are available on the: [3].
Bill of Materials (BOM)
The updated version of the BOM can be downloaded from the project repository on the: [4]
Electronics
Stepper Motors
The GLKLN uses, including the two extruders, 6 stepper motors. Two of these motors, the Z-axis motors, are connected to the same stepper driver of the electronics.
Controller Electronics
The GLKLN uses MKS Gen L motherboard. Because RepRap printers compatibility it can be based on the other RepRap controller boards.