HackerBot print area
Revision as of 09:18, 14 February 2014 by Balestrino (talk | contribs) (Created page with "{{RepRapNavigation|name=HackerBot}} ====Step 32: Assembling Print area==== {| {{table}} border=1 |+ '''Print area''' | width="50" align="center" style="background:#f0f0f0;"|...")
HackerBot Documentation
Step 32: Assembling Print area
qty | part name | description/notes |
1 | Print bed | MK* heatbed or acrylic plate |
1 | Heatbed glass | needed for MK* heatbeds |
4 | MK* Heatbed springs | 25mm length compression spring (1.2mm wire) |
4 | M3x35 heatbed | use a washer to avoid scratching the heatbed |
First assemble and check: MK Heatbed wiring
Insert the four M3 screws in the MK Heatbed holes with a washer between head screws and hot plate.
Fasten the 4 screws in threaded holes of Heatbed support keeping a distance between this and the hot plate:
** Print area COMPLETE **