Hammerhead Nozzle

From RepRap
Revision as of 12:58, 23 November 2013 by Reifsnyderb (talk | contribs)
Jump to: navigation, search
Crystal Clear action run.png
Hammerhead Nozzle

Release status: experimental

Hammerhead 1.jpg
Description
Double heater hot-end that uses J-Head components and a special nozzle.
License
GPL
Author
Contributors
Based-on
Categories
CAD Models
External Link


Page under development. More information coming soon.


Introduction

Requests have been made for a hot-end that can extruder quickly with an orifice 1mm, in diameter, or greater. This nozzle uses all J-Head Mk V series compatible parts. Only the brass nozzle is different.

Parts List

Mk I

Summary: First Hammerhead hot-end.


Quantity Part Description Part Number Instructions
1 Hammerhead Nozzle (v1.0) Machined Brass Nozzle/Dual Heater Combination, Version 1
1 Nozzle Holder (v5) Machined PEEK Nozzle Holder, Version 5 J-Head Nozzle Holder, V5
1 PTFE liner (v2) 1/8" ID, 1/4" OD PTFE tubing, Version 2 McMaster-Carr 5033K31 J-Head PTFE Liner, V2
1 Heater Resistor Axial, 5.6 ohm, 1%, 5W UB5C-5.6-ND
1 Thermistor 5 Semitec 104GT-2
1 Hollow-lock socket set screw 5/16-24 hollow-lock socket set screw McMaster-Carr 91301A150
1 Flat Washer 1/4" OD Flat Washer McMaster-Carr 98032A436

Machined Parts

Hammerhead Nozzle

Version 1