Hot End Comparison
Revision as of 02:16, 15 March 2014 by NewPerfection (talk | contribs)
Hot end designers are encouraged to add their hot ends in the table below, as well as start a wiki page where lists of suppliers can be put.
- this table is for hot ends only, it is not a supplier list, add your supplier list to the wiki page associated with the hot end
| Hotend name | Designer | Mount type | Direct/Bowden | Build Material | Filament sizes | Nozzle Sizes | license | Wikipage/Link | Reviews & Additional notes |
|---|---|---|---|---|---|---|---|---|---|
| E3D - V5 | Sanjay | Modified Groove Mount | Both | All Metal | 1.75/3mm | 0.25/0.3/0.35/0.4/0.6/0.8mm | CC BY-NC-SA 3.0 | Wiki Page, E3D Online | Forum Discussion |
| Aluhotend V5B | Thejollygrimreaper | 4.6mm grovemount (same as jhead) | direct (bowden with printed adapter) | stainless/aluminium/brass/ptfe liner | 1.75mm | 0.3/0.5mm | NC (to be revised) | Wiki Page, Webstore | - |
| J-Head Mk V | Brian Reifsnyder | Groove Mount | Direct; Bowden with Adapter | PEEK/PTFE/Metal | 1.75/3mm | 0.35/0.45/0.5mm | GPL | Wiki Page, hotends.com | - |
| sample entry | sample | sample | sample | sample | sample | sample | sample | sample | sample |
