Huxley Seedling

From RepRap
Revision as of 18:26, 18 November 2010 by Bodgeit (talk | contribs) (To do list)
Jump to: navigation, search

This page is a development stub. Please enhance this page by adding information, cad files, nice big images, and well structured data!

Crystal Clear action run.png
Seedling Basic Repstrap-Huxley Development

Release status: experimental

Mini-mendel.jpg
Description
A basic simple 3D printer based on Huxley to print all the parts needed to build Huxley or Mendel uses only materials & components that anyone can make or buy. Low cost low tech.
License
Author
Contributors
Based-on
Categories
CAD Models
External Link




Note: Huxley is optimized to be printed. 

Introduction

For the last two years I have been building various RepStrap versions of Darwin, Mendel trying to devise simple ways to build these printed self replicating machines. Huxley Seedling is based on all of the experience gained building the previous RepStraps. I built two of these RepStraps in February 2010 This will be the final rendition/ re-design.

This is the very First posting of all the components and drawings used to build a Huxley Seedling machine.

Note: Sebastien I have not blogged this design.. ;-) Nophead saw some of the early parts in February when we meet up. 

Done

Made the drawings for new Worm Extruder Drive MKV.

Made the component parts for Worm Extruder Drive MKV.

Build the Worm Extruder Drive MKV.

Test the Worm Extruder Drive MKV.

Learning to drive this wiki!

Lots of drawings and then draw all of them again as lost all of the previous drawings!!!!

Then re-making every part from those drawings might try other means to make from drawings..

Estimated total cost just below £200 in parts.

To do list

Documenting each stage

Photographing the build process.

Listing raw materials tools etc.

Spell checking every thing.

Working Notes

Discussion

Files

Drawings

Worm Extruder Drive MKIII Drawings go here

Tooling

Process

See Also