KosselHybrid

From RepRap
Revision as of 22:33, 8 February 2015 by Lkcl (talk | contribs) (Links)
Jump to: navigation, search
Crystal Clear action run.png
KosselHybrid

Release status: experimental

Kossel.jpg
Description
Delta robot 3D printer with extrusion frame.
License
Author
Contributors
Based-on
Categories
CAD Models
External Link


Introduction

The KosselHybrid is a planned larger GPL-compliant variant of the Kossel that uses parts available for the Rostock MAX, Kossel Pro and other kits to give a much larger print base.

Design Goals

  • Zero backlash.
  • Magnetic connecting rods
  • Triple fans on the print head
  • Type: Delta printer
  • Speed: 320 mm/s in all 3 directions.
  • Resolution: 100 steps/mm in all 3 directions.
  • Repeatability: better than 0.03 mm (30 micron)
  • Build volume: cylindrical, 255mm diameter, 240mm height.
  • Footprint: triangle, 450 mm width (360mm OpenBeam + printed corners).
  • Frame height: 600 mm.
  • Print surface: heated round glass, doesn't move.
  • Mass of end effector with hotend: less than 50 grams.
  • Simplicity: fewer than 200 parts.
  • Hardware cost: less than $700 USD.
  • Fully automatic print surface level calibration (autoleveling).

Bill of Materials

Printed parts

Most parts identical to Kossel


Frame

TBD

Fasteners

TBD

Linear motion

Identical to Kossel

Diagonal push rods

TBD


Bowden

Identical to Kossel


Endstops

Identical to Kossel

Automatic bed leveling probe

Identical to Kossel


Electronics

Identical to Kossel

Tools

This is not a comprehensive list, but should give you an idea of what tools may be required. Review all build manuals/videos to ensure you have all necessary tools.

  • 1x metric caliper
  • 1x M4 Tap Drill bit
  • 1x M5 Tap Drill bit
  • 1x 1.5 mm allen wrench
  • 1x slow-set epoxy

Assembly instructions

TBD

Links

Reearch purposes: