LaserCut Mendel Assembly Photos
Revision as of 15:31, 6 July 2011 by ShayWalters (talk | contribs)
These are some photos I made of my TechZone LaserCut Mendel. Some photos were made during assembly, some were done after assembly.
Pre-assembly - showing the two triangular sides
And below is the frame assembled. NOTE that the X carriage is reversed - the X stepper motor should be on the same side of the frame as the Z stepper.
NOTE that the X carriage is reversed - the X stepper motor should be on the same side of the frame as the Z stepper.
Electronics
Here are some other pages I have found useful:
LaserCut Mendel Assembly For Complete Beginners
Generation_3_Electronics/Tech_Zone_Remix/How_to
Generation_3_Electronics/Tech_Zone_Remix/Installation