Plastic Recycler
Revision as of 13:06, 15 April 2014 by Ben1344 (talk | contribs) (Created page with "{{Development:Stub}} {{Development |status = Concept |description = HDPE Recycler |author = Ben1344 |categories = ExtrudersCategory:Extruders |url ...")
This page is a development stub. Please enhance this page by adding information, cad files, nice big images, and well structured data!
Plastic Recycler
Release status: Concept
Description | HDPE Recycler
|
License | unknown
|
Author | |
Contributors | |
Based-on | [[]]
|
Categories | |
CAD Models | |
External Link |
Introduction
The Plastic Recycler is intended to allow HDPE milk jugs to be recycled into usable plastic filament. The design here is heavily based on the Lynman Extruder.
General Design
- A 5/8" (0.625" diameter) Wood Auger bit will move the plastic.
- 1/2" SCH 20 pipe will form most of the remaining tube. (ID 0.626")
- The nozzle will be a cap with a hole drilled in it.
- Heat the tube will be heated with NiChrome wire.
- Fiber glass cloth will be used to electrically insulate the brass tube from the NiChrome.
- The frame will be made of plywood and 2x4s