Polygondelta1070 SourceRelease dec2015

Laser files

File:Polygondelta1070 laser dec2015.pdf

Sheet Materials

• 3/32" Delrin (Columns A,B*3,C)
• 1/8" Delrin (Columns D,E,F)
• 3mm Acrylic (Columns G,H)
• 1/32" Delrin (Columns I)
• 1/16" Delrin (Columns J)

Tower Hardware (three sets)

• 2 M2x8 socket
• 4 M3x6 low profile socket
• 6 M3x6 dome black
• 11 M3x8 dome black
• 4 M3x10 dome/countersink socket black
• 3 M3x22 socket
• 3 M3 t-slot nut
• 2 M5x5/6 cup set screw black
• 1 M5x8/6 dome black
• 8 M5x10 dome black
• 1 M5x18 socket black
• 9 M5 t-slot nut
• 2 M5 large diameter washer
• 1 M5 small diameter washer
• 2 11x5x5mm bearing
• 3 0.5x0.1875x0.12in standoff
• 1 sorbothane bumper
• 1 sub miniature microswitch
• 4 corner bracket (Misumi HBLFSL5)

Hub Hardware (two sets)

• 6 M5 t-slot nut
• 6 M5x8 dome black
• 1 M3x10 dome black
• 9 M3x6 dome black

Ebox Hardware

• 4 M2.5x6 socket
• 7 M3x6 dome

V6/Lite6/Volcano Effector Hardware

• 3 M2x10 dome
• 8 M2.5x6 socket
• 6 M3x5 dome
• 12 M3x8 dome
• 2 M3x12/14 dome
• 6 M5x5 setscrew ferrous

Filament Drive HW

• 5 M5x10 spacer
• 4 M3x8 dome
• 1 MK8 drive pulley
• 16 M3x16 dome
• 4 M3x10 dome
• 2 8-32in hex nut
• 1 10x5x4mm bearing

Spool Roller HW

• 4 M4x8 dome
• 4 M4 hex nut
• 1 M5x12 dome
• 1 M5 hex nut

Misc

• 220 sandpaper