Power Distribution and Communications Board v1.3
Power and Communications Board v1.3
Note: development on Kicad boards should be done in the electronics/powercomms-1.3 directory in subversion
Already Done
- Add debug LED's to TTL Tx/Rx lines (nophead)
- Add debug LED's to RS232 Tx/Rx lines (nophead)
- Add RJ11 connectors to Tx/Rx (Zach Smith)
TODO List
- Layout board in Kicad
- Make .100" holes slightly bigger
- Test LED modifications on v1.2.1 board with 'green wire' mods.