Prusa i3 Build Manual
|
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文（中国大陆） • 中文（台灣） • עברית • azərbaycanca • |
Boxed style Frame Style
In the future this page might contain a tutorial until then a tutorial for the boxed frame style prusa i3 by Kliment: http://78.47.92.212/i3_documentation_pics/
http://koti.kapsi.fi/~kliment/photos/i3/ http://koti.kapsi.fi/~kliment/photos/prusa3/
Single Sheet Frame Style
There is no tutorial for the Single Sheet Frame style Prusa i3 however the X axis, X cariage and Y frame and bed are mostly the same.
JBFromOZ - preparing to build an aluminium frame prusa i3.
rod lengths are listed here http://titanpad.com/bU77NESnMC
Instructions on the github say to RP each part in the single-plate folder. some items need more than 1 copy. It is not yet 100% clear which extruder to use, I am planning to use a MGS extruder with a Nema17 stepper
| Description | Qty | Image |
| RP Parts | ||
| z-axis-top.scad | 1 |  |
| z-axis-bottom.scad | 1 |  |
| y-motor.scad | 1 |  |
| y-idler.scad | 1 |  |
| y-corners.scad | 4 |  |
| bushing.scad (in box-frame folder) | 1 (set of 3) |  |
| y-belt-holder.scad | 1 |  |
| x-end-motor.scad | 1 |  |
| x-carriage.scad | 1 |  |
| magnetic-holder.scad | 1 |  |
| fan-mount.scad | 2 |  |
| belt-guide.scad | 4 |  |
| dual-extruder.scad | 1 (???) |  |
| compact-extruder.scad | 1 (???) |  |
| Aluminium 6mm plate 370mm x 370mm | ||
| Prusa3ALU-FREZOVANY-v4.dxf | 1 |  |
BOM
NEMA17 steppers x 5
J-Head MkV x 1
GT2 pulleys x 2
GT2 belts x 2
clear tubing (z coupling) x 2
Z drives M5 (length) x 2
