RAMPS 1.6

From RepRap
Revision as of 19:47, 2 December 2018 by NinthDimension (talk | contribs) (bolded important info)
Jump to: navigation, search
Version specific info
RAMPS 1.7 | RAMPS 1.6 | RAMPS 1.5 | RAMPS 1.4.4 | RAMPS 1.4 | RAMPS 1.3 | RAMPS 1.2 (RAMPS 1.2 old) and older
Crystal Clear action run.png
RAMPS 1.6

Release status: Working

Ramps1-6.jpg
Description
RepRap Arduino Mega Pololu Shield Arduino MEGA based modular RepRap electronics.
License
?
Author
Contributors
Based-on
Categories
CAD Models
External Link



The RAMPS 1.6 is the second RAMPS iteration released by BIQU/BIGTREETECH. It replaces the original green power connector with a pair of screw terminals, adds a larger heatsink over the MOSFETS, and has a larger bed MOSFET. It maintains the surface-mounted fuses and flush MOSFETS of the RAMPS 1.5.

IMPORTANT: It is important to note that the RAMPS 1.6 is not developed by UltiMachine, the original developer of the RAMPS boards. It is designed and manufactured by BIQU/BIGTREETECH based on the original open-source RAMPS designs but they have not open-sourced the designs or released any official documentation to date which is in violation of the original RAMPS hardware license.

Also, the positions of the D1 and D2 diodes have been swapped from the positions in RAMPS 1.4, the D1 diode is now the diode closest to fuse F2. The same is true for RAMPS 1.5, also manufactured by BIQU/BIGTREETECH.

Gallery

RAMPS1-6 top.JPG RAMPS1-6connectors.jpg