RUG/Pennsylvania/State College/Printers/PSU Blue and White

From RepRap
Revision as of 20:32, 25 April 2013 by Yoc5166 (talk | contribs) (Operating Specifications)
Jump to: navigation, search
                                                  Blue&White small.png


                       BigRed2.jpg

Operating Specifications

Operating Specifications
Name Status Design Electronics Firmware Extruder Temperature Comments
Blue&WhiteBlue&White Under Construction Ohm RAMPS 1.4 Marlin


Photos

About this printer

Blue and White printer

This printer is designed to be an Open Hybrid Mendel, or OHM for short.

We originally hoped to print all pieces in red, however due to the limited supply of red plastic we were forced to choose a different color. This particular class has been producing 3D printers from scratch. Most of the printers assembled are OHM printer models but each semester parts for the printers are being innovated and changed. For example, a few structural pieces for our printer have been tweaked to better accommodate the use of our printers. Also for our end stops we are transitioning from light sensors to touch sensors. Another change is we are changing the electronics system of our printers to the RAMBo electronics.


State College RepRap Users Group
PSURUGQR.png
S.C.R.U.G. Main · The Make Space · Intercollegiate Future Society · Wiki Help
Herringbone glowing2.jpg