RUG/Pennsylvania/State College/Printers/PSU Unit Black

Group Members:

This page is for information about the PSU Unit Black. This unit is of the Mendel/Prusia hybrid variety. All of the printed parts were printed by other units in our group.

Operating Specifications

Status: Operational

Needs: Nothing at the moment.

Com Port: 6

Black Filament: 201-203 degrees Celsius

Red Filament: 202 degrees Celsius

Clear Filament: 200 degrees Celsius

Modifications & Upgrades

Operation

<videoflash type="youtube">NrnnGxAKKhM?hd=1</videoflash> <videoflash type="youtube">ihorym9Zc4k?hd=1</videoflash> <videoflash type="youtube">dXi6hgUPAG4?hd=1</videoflash>

PSU Unit Black - Current Condition

As of 9/15/11. Basic RepRap framing structure assembled.
As of 9/29/11. All axes assembled, 2/3 of the motors are mounted. The extruder is about 60% assembled. Electronic components to be attached soon.
As of 10/20/11. All components (including Electrical) are attached, now calibration is taking place for appropriately functioning components.
As of 11/8/11. RepRap is completed and has been tweaked. It is now printing out parts.
As of 11/15/11. Now upgraded with maximized bed.
As of 12/8/11. RepRap now has Quick Adjusting Print Bed.