RUG/Pennsylvania/State College/Printers/PSU Unit MakerBots
Contents
Operating Specifications
Operating Specifications | |||||||
---|---|---|---|---|---|---|---|
Name | Status | Design | Electronics | Firmware | Extruder | Temperature | Comments |
ToM Mk6+ | Not Working | Makerbot Thing-O-Matic | Generation 4 | v3.1 | Stepstruder Mk6+ | 210C | Infamous Toolhead 0 not found error. Suspect serial bus issue. |
Cupcake Gen 3 | Not Working | Makerbot Cupcake | Generation 3 | v3.1 | ??? | ??? | Extruder jams, extruder controller firmware won't update |
Current Status
Thing-O-Matic
- Toolhead 0 not found problem. As of this writing I suspect an IC on the motherboard needs to be replaced. I will test this printer's electronics on my Thing-O-Matic to verify, then order the new chip.
- ABP belt is torn
Cupcake
- The extruder thermal insulator is badly clogged. It needs to be unclogged or replaced. It looks like the nozzle is badly jammed as well.
- The extruder board is unresponsive to firmware updates. I'll try an older version of Replicator G sometime soon.
Jarred (talk) 03:37, 16 February 2014 (PST)
Details
PSU Unit ToM
- Model: Makerbot Thing-o-Matic Mk6+
- Owner: Dr. Timothy Simpson
- Bot No. 4283
- Assembled: December 2011
PSU Unit Cupcake
- Model: Makerbot Cupcake Gen 3
- Owner: StudioLab
- Unit #: ???
- Assembled: ???
Gallery
Printer Tag Template: Makerbots
File:PSU printer tag template makerbot.pub
Jarred (talk) 03:37, 16 February 2014 (PST)
|