RUG/Pennsylvania/State College/Printers/PSU Unit Yellow
|
|
Introduction
This page is dedicated to the PSU Unit Yellow 3D printer. This unit will follow the design of the Open Hybrid Mendel developed by students of the EDSGN 497 class at The Pennsylvania State University.
This printer is mainly comprised of yellow frame pieces. The Z axis motors plates are a unique green color because those parts were printed on the makerbots in the PSU Learning Factory.
Log
| Date | Modification / Problem |
|---|---|
| 19 March 2014 | Intermittent extrusion issues, pending diagnosis of the issue. |
| December 2013 | Green and Yellow is completed and operational |
Gallery
Pending me actually taking pictures of the bot....
Operating Specifications
| Design | Ohm |
| Electronics | RAMPS |
| Firmware | Marlin |
| Extruder | 0.35mm |
Note: Extruder might be 0.4mm. Check the board in 312.
Builders
Spring 2013 Yellow team: Btz5006, Djl5217, Vatlark, MarkKeller22
Jarred (talk) 18:35, 19 March 2014 (PDT)
| ||||||||||
