RUG/Pennsylvania/State College/Spring 2012

From RepRap
Revision as of 16:58, 12 April 2012 by Sem5354 (talk | contribs) (Silver)
Jump to: navigation, search

Who's working on it

Adam

Nick

Randy

Stephen

Maria

Greg

Ian

Shari

Parts List

See the Open Hybrid Mendel for component diagrams. Each OHM will also need a full set of metal rods, which can be cut with the portable band saw.

Orange

Sub-System Quantity File-Name Comments Complete File link
Frame 6 Vertices A printable version of our PCR tray. 6/6
8 Y Bar Clamp 8/8
1 Y Motor Bracket 1/1
1 Y Idler Bracket 1/1
Z Axis 4 Prusa Bar Clamp 0/4
4 Motor Coupling connects z motor axles to threaded rods 0/4
2 Prusa Z motor mount one for each side 0/2
2 Z Bar Top Clamp 0/2
Open Y Axis 4 Bed Springs 4/4
1 Y Belt Harness 0/1
1 Crossbar Mount 1/1
2 Y Bar Arm 2/2
1 Y Angled Arm 1/1
2 Undercarriage Bracket 2/2
Open X Axis 2 X-180 Bearing Plate 2/2
2 X-360 Bearing Plate (Left) 0/2
2 X-360 Bearing Plate (Right) 0/2
1 X Axis Motor Bracket 0/1
6 M3 X Bar Clamp 6/6
4 M4 X Bar Clamp 4/4
1 X Axis End Bracket 0/1
4 Vert Drive Nut Trap 0/2
2 Vert-180 Drive Side Plate 0/2
2 Vert-360 Drive Side Plate 0/2
X Carriage 1 Carriage Base 0/1
1 X Angled Arm 0/1
2 Undercarriage Bracket 0/2
Extruder 1 Herringbone Drive Gear 0/1
1 Herringbone Driven Gear 0/1
1 Bearing and Motor Bracket 0/1
1 Extruder Idler 0/1
Extras 1 Tie Fighter [1] Because its awesome. This might have to wait until we get the machine working.

Silver

Silver Team's progress as of March 27, 2012
Sub-System Quantity File-Name Comments Complete File link
Frame 6 Vertices A printable version of our PCR tray. 6/6 +2 extra
8 Y Bar Clamp 8/8
1 Y Motor Bracket 1/1
1 Y Idler Bracket 1/1
Z Axis 4 Prusa Bar Clamp 4/4
4 Motor Coupling connects z motor axles to threaded rods 0/4
2 Prusa Z motor mount one for each side 2/2
2 Z Bar Top Clamp 2/2
Open Y Axis 4 Bed Springs 4/4
1 Y Belt Harness 0/1
1 Crossbar Mount 0/1
2 Y Bar Arm 0/2
1 Y Angled Arm 0/1
2 Undercarriage Bracket 2/2
Open X Axis 2 X-180 Bearing Plate 2/2
2 X-360 Bearing Plate (Left) 2/2
2 X-360 Bearing Plate (Right) 2/2
1 X Axis Motor Bracket 1/1
6 M3 X Bar Clamp 2/6
4 M4 X Bar Clamp 2/4
1 X Axis End Bracket 1/1
4 Vert Drive Nut Trap 0/2
2 Vert-180 Drive Side Plate 0/2
2 Vert-360 Drive Side Plate 1/2
X Carriage 1 Carriage Base 0/1
1 X Angled Arm 0/1
2 Undercarriage Bracket 0/2
Extruder 1 Herringbone Drive Gear 0/1
1 Herringbone Driven Gear 0/1
1 Bearing and Motor Bracket 0/1
1 Extruder Idler 0/1
Extras 1 Tie Fighter [2] Because its awesome. This might have to wait until we get the machine working.

Yellow

Sub-System Quantity File-Name Comments Complete File link
Frame 6 Vertices A printable version of our PCR tray. 6/6
8 Y Bar Clamp 8/8
1 Y Motor Bracket 1/1
1 Y Idler Bracket 1/1
Z Axis 4 Prusa Bar Clamp 4/4
4 Motor Coupling connects z motor axles to threaded rods 0/4
2 Prusa Z motor mount one for each side 2/2
2 Z Bar Top Clamp 2/2
Open Y Axis 4 Bed Springs 0/4
1 Y Belt Harness 0/1
1 Crossbar Mount 0/1
2 Y Bar Arm 0/2
1 Y Angled Arm 0/1
2 Undercarriage Bracket 0/2
Open X Axis 2 X-180 Bearing Plate 2/2
2 X-360 Bearing Plate (Left) 2/2
2 X-360 Bearing Plate (Right) 0/2
1 X Axis Motor Bracket 1/1
6 M3 X Bar Clamp 6/6
4 M4 X Bar Clamp 4/4
1 X Axis End Bracket 1/1
4 Vert Drive Nut Trap 4/4
2 Vert-180 Drive Side Plate 2/2
2 Vert-360 Drive Side Plate 0/2
X Carriage 1 Carriage Base 0/1
1 X Angled Arm 0/1
2 Undercarriage Bracket 0/2
Extruder 1 Herringbone Drive Gear 0/1
1 Herringbone Driven Gear 0/1
1 Bearing and Motor Bracket 0/1
1 Extruder Idler 0/1
Extras 1 Tie Fighter [3] Because its awesome. This might have to wait until we get the machine working.