RapMan
This page is a development stub. Please enhance this page by adding information, cad files, nice big images, and well structured data!
Release status: unknown
| Description | A commercial version of the Darwin sold as a kit.
|
| License | unknown
|
| Author | |
| Contributors | |
| Based-on | |
| Categories | |
| CAD Models | |
| External Link |
You might also want to look at BitsFromBytesRepRap. Perhaps some or all of that page should be merged into this page. (Discuss)
The RapMan is a proprietary commercial work based on the Darwin with
- different electronics (no PC required, working with gcode-files off an SD-card utilizing an OLED display as user interface) and
- the rapid prototyped parts replaced by laser cut acrylic parts, and
- a different extruder (said to be quite reliable)
- electronics, CAD files of acrylic parts and the BOM are mostly closed source
It is sold by Bits From Bytes as a kit containing all required parts and assembly instructons.
The new RepMan Pro is even sold pre-assembled and ready to run as an offering mostly to technical, educational institutions.
BitsFromBytes have released some versions of their firmware under a Creative Commons license, but they're almost never current. To reduce the dependence on releases at their discretion, an open source fork of the firmware was proposed.
