STB Electronics

From RepRap
Revision as of 13:00, 2 January 2013 by STB (talk | contribs)
Jump to: navigation, search
Crystal Clear action run.png
STB

Release status: working

STB Board 1.png
Description
Release Version 0.9
License
unknown
Author
Contributors
Based-on
Categories
CAD Models
External Link


Status

Currently (01/Jan/2013) are 10 boards ready for shipment, it was the prototype batch. If you are interested, please contact the author under his e-mail address to get further informations and pricing. You can find it at the end of this page.

Introduction

STB Board 1.png


STB Electronics

STB Board init.png

  • Reverse polarity protection
  • 12V to 24V operating voltage
  • Processor ATmega1284p runs at 20MHz
  • Graphic LCD 128x64 pixel
  • Click encoder wheel
  • 4 Stepper channels (X-Axis, Y-Axis, Z-Axis(2 connectors for 2 motors), Extruder)
  • 3 Endstop inputs
  • Heatbed
  • Nozzle
  • Fan output (5V or 12V/24V depends on power supply)
  • SD-Card
  • USB-Connector

All in one Solution

The board batch consists of more than the control electronic. Also on it are 6 stepper drivers (Pololu compatible) and 4 opto endstops. So the beginner has all the electronic parts he needs plus two spare stepper drivers and one spare endstop.

STB Board batch.png

User Interface

STB Board menu.png

Firmware

The Firmware is based on EricZalm's Marlin. Only a few modifications must done. I hope Eric will include the necessary changes in Marlin. I'm currently working on the final documents for the pull request.


Files (will be published soon

  • PCB gerber data
  • Partlist


Contact

Contact STB