User contributions
(newest | oldest) View (newer 500 | older 500) (20 | 50 | 100 | 250 | 500)
- 13:11, 13 September 2021 (diff | hist) . . (+1,356) . . G-code (→M568: Turn off/on tool mix ratios (obsolete))
- 05:50, 26 August 2021 (diff | hist) . . (0) . . m G-code (→M80: ATX Power On)
- 05:33, 26 August 2021 (diff | hist) . . (+224) . . G-code (→M80: ATX Power On)
- 05:46, 21 August 2021 (diff | hist) . . (+1,008) . . G-code (→M569.6: Execute Closed-loop Driver Tuning Move)
- 12:19, 29 July 2021 (diff | hist) . . (-12) . . G-code (→M569.6: Execute Closed-loop Driver Tuning Move)
- 12:19, 29 July 2021 (diff | hist) . . (-12) . . m G-code (→M569.5: Collect Data from Closed-loop Driver)
- 12:18, 29 July 2021 (diff | hist) . . (+913) . . G-code (Allocated M569.5 and M569.6)
- 06:55, 10 July 2021 (diff | hist) . . (+57) . . G-code (→M575: Set serial comms parameters)
- 17:26, 1 July 2021 (diff | hist) . . (+885) . . G-code (Added M569.2 Read/write stepper motor register)
- 09:15, 10 June 2021 (diff | hist) . . (+14) . . G-code (→M250: Set LCD contrast)
- 09:12, 10 June 2021 (diff | hist) . . (-18) . . G-code (→M207 (RepRapFirmware): Calibrate Z axis with Z max endstop)
- 14:44, 4 June 2021 (diff | hist) . . (0) . . m G-code (→M651: execute peel move)
- 09:30, 20 March 2021 (diff | hist) . . (-3) . . G-code (→M955: Configure Accelerometer)
- 09:28, 20 March 2021 (diff | hist) . . (+479) . . G-code (→M955: Configure Accelerometer)
- 16:06, 19 March 2021 (diff | hist) . . (+108) . . G-code (→M997: Perform in-application firmware update)
- 16:05, 19 March 2021 (diff | hist) . . (-59) . . G-code (→M956: Collect accelerometer data and write to file)
- 16:01, 19 March 2021 (diff | hist) . . (-17) . . G-code (→M955: Configure Accelerometer)
- 14:24, 19 March 2021 (diff | hist) . . (+723) . . G-code (Added M956)
- 15:41, 17 March 2021 (diff | hist) . . (+2,275) . . G-code (Added M955)
- 12:18, 11 March 2021 (diff | hist) . . (+21) . . G-code (→G17..19: Plane Selection (CNC specific))
- 09:11, 25 February 2021 (diff | hist) . . (+15) . . G-code (→M73: Set/Get build percentage)
- 11:25, 22 February 2021 (diff | hist) . . (+20) . . G-code (→M73: Set/Get build percentage)
- 08:11, 8 February 2021 (diff | hist) . . (0) . . m G-code (→M808: Set or Goto Repeat Marker)
- 05:13, 3 January 2021 (diff | hist) . . (+15) . . G-code (→M17: Enable/Power all stepper motors)
- 05:33, 28 December 2020 (diff | hist) . . (+816) . . G-code (Added M954)
- 18:13, 7 December 2020 (diff | hist) . . (+58) . . G-code (→M595: Set movement queue length)
- 06:14, 7 December 2020 (diff | hist) . . (+1,270) . . G-code (Added M595)
- 07:04, 25 November 2020 (diff | hist) . . (+5) . . G-code (→M808: Set or Goto Repeat Marker)
- 07:01, 25 November 2020 (diff | hist) . . (+34) . . G-code (→M808: Set or Goto Repeat Marker)
- 06:51, 25 November 2020 (diff | hist) . . (+34) . . G-code (→M808: Set or Goto Repeat Marker)
- 06:50, 25 November 2020 (diff | hist) . . (+302) . . G-code (→M808: Set or Goto Repeat Marker)
- 06:15, 25 November 2020 (diff | hist) . . (+357) . . G-code (→M808: Set or Goto Repeat Marker)
- 06:42, 5 November 2020 (diff | hist) . . (+67) . . G-code (→G31: Set or Report Current Probe status)
- 06:40, 5 November 2020 (diff | hist) . . (+13) . . G-code (→G76: PINDA probe temperature calibration)
- 06:37, 5 November 2020 (diff | hist) . . (+222) . . G-code (→G29 Mesh Bed Compensation (RepRapFirmware))
- 06:34, 5 November 2020 (diff | hist) . . (+13) . . G-code (→G23: Firmware Recover)
- 06:34, 5 November 2020 (diff | hist) . . (+13) . . G-code (→G22: Firmware Retract)
- 06:31, 5 November 2020 (diff | hist) . . (-51) . . m G-code (→Conditional Execution and Loops)
- 06:29, 5 November 2020 (diff | hist) . . (0) . . m G-code (→Using expressions in parameters)
- 06:28, 5 November 2020 (diff | hist) . . (0) . . m G-code (→Quoted strings)
- 06:27, 5 November 2020 (diff | hist) . . (+83) . . G-code (→M997: Perform in-application firmware update)
- 06:23, 5 November 2020 (diff | hist) . . (+1) . . m G-code (→M953: Set CAN-FD bus fast data rate)
- 06:20, 5 November 2020 (diff | hist) . . (+582) . . G-code (→M918: Configure direct-connect display)
- 06:19, 2 November 2020 (diff | hist) . . (+21) . . G-code (→M48: Measure Z-Probe repeatability)
- 06:18, 2 November 2020 (diff | hist) . . (+26) . . G-code (→M40: Eject)
- 06:12, 2 November 2020 (diff | hist) . . (+521) . . G-code (→M20: List SD card)
- 03:29, 4 August 2020 (diff | hist) . . (+102) . . G-code (→M569.1: Stepper driver closed loop control)
- 11:19, 11 June 2020 (diff | hist) . . (+14) . . G-code (→G17..19: Plane Selection (CNC specific))
- 11:17, 11 June 2020 (diff | hist) . . (+7) . . m G-code (→Using expressions in parameters)
- 11:17, 11 June 2020 (diff | hist) . . (+210) . . G-code (→Using expressions in parameters)
- 11:14, 11 June 2020 (diff | hist) . . (+487) . . G-code (→Quoted strings)
- 05:58, 10 June 2020 (diff | hist) . . (0) . . m G-code (→M569.1: Stepper driver closed loop control)
- 05:57, 10 June 2020 (diff | hist) . . (+64) . . G-code (→M569.1: Stepper driver closed loop control)
- 12:38, 9 June 2020 (diff | hist) . . (+84) . . G-code (→M569.1: Stepper driver closed loop control)
- 12:36, 9 June 2020 (diff | hist) . . (+826) . . G-code (→M569: Stepper driver control)
- 12:08, 8 May 2020 (diff | hist) . . (+9) . . G-code (→G34: Z Stepper Auto-Align)
- 12:06, 8 May 2020 (diff | hist) . . (+9) . . G-code (→G34: Z Stepper Auto-Align)
- 12:03, 8 May 2020 (diff | hist) . . (+57) . . G-code (→M120: Push)
- 12:01, 8 May 2020 (diff | hist) . . (+263) . . G-code (→M118: Echo message on host)
- 11:54, 8 May 2020 (diff | hist) . . (+68) . . G-code (→M109: Set Extruder Temperature and Wait)
- 11:51, 8 May 2020 (diff | hist) . . (-631) . . G-code (→M105: Get Extruder Temperature)
- 11:47, 8 May 2020 (diff | hist) . . (+34) . . G-code (→M46: Show the assigned IP address)
- 11:45, 8 May 2020 (diff | hist) . . (+29) . . G-code (→M41: Loop)
- 11:40, 8 May 2020 (diff | hist) . . (+17) . . G-code (→M25: Pause SD print)
- 11:38, 8 May 2020 (diff | hist) . . (+2) . . m G-code (→M20: List SD card)
- 18:51, 5 May 2020 (diff | hist) . . (+4) . . G-code (→M486: Cancel Object)
- 18:48, 5 May 2020 (diff | hist) . . (+124) . . G-code (→M290: Babystepping)
- 18:43, 5 May 2020 (diff | hist) . . (0) . . G-code (→M260: i2c Send Data)
- 18:42, 5 May 2020 (diff | hist) . . (-3) . . m G-code (→M260: i2c Send Data)
- 18:41, 5 May 2020 (diff | hist) . . (+40) . . G-code (→M226: G-code Initiated Pause)
- 18:37, 5 May 2020 (diff | hist) . . (+572) . . G-code (→G21: Set Units to Millimeters)
- 18:34, 5 May 2020 (diff | hist) . . (+330) . . G-code (→G20: Set Units to Inches)
- 18:29, 5 May 2020 (diff | hist) . . (+197) . . G-code (→M203: Set maximum feedrate)
- 18:25, 5 May 2020 (diff | hist) . . (+199) . . G-code (→M201: Set max printing acceleration)
- 07:14, 3 May 2020 (diff | hist) . . (+84) . . G-code (→M486: Cancel Object)
- 03:48, 14 April 2020 (diff | hist) . . (+4) . . G-code (→M375: Display matrix / Load Matrix)
- 03:48, 14 April 2020 (diff | hist) . . (+4) . . G-code (→M374: Save calibration grid)
- 03:35, 14 April 2020 (diff | hist) . . (+77) . . G-code (→M203: Set maximum feedrate)
- 06:47, 9 April 2020 (diff | hist) . . (0) . . m G-code (→M650: Set peel move parameters)
- 06:46, 9 April 2020 (diff | hist) . . (+6) . . G-code (→M600: Filament change pause)
- 06:46, 9 April 2020 (diff | hist) . . (+19) . . G-code (→M601: Pause print)
- 06:04, 9 April 2020 (diff | hist) . . (-3) . . G-code (→M851: Set Z-Probe Offset)
- 06:01, 9 April 2020 (diff | hist) . . (0) . . G-code (→M602: Resume print)
- 05:59, 9 April 2020 (diff | hist) . . (+32) . . G-code (→M603: Stop print)
- 05:59, 9 April 2020 (diff | hist) . . (+33) . . G-code (→M602: Resume print)
- 05:58, 9 April 2020 (diff | hist) . . (+34) . . G-code (→M601: Pause print)
- 03:50, 6 April 2020 (diff | hist) . . (+5) . . G-code (→M150: Set LED color)
- 03:48, 6 April 2020 (diff | hist) . . (+9) . . G-code (→M150: Set LED color)
- 03:40, 6 April 2020 (diff | hist) . . (+692) . . G-code (→M150: Set LED color)
- 07:01, 5 April 2020 (diff | hist) . . (+103) . . G-code (→M150: Set LED color)
- 06:54, 5 April 2020 (diff | hist) . . (+467) . . G-code (→M150: Set LED color)
- 12:26, 29 March 2020 (diff | hist) . . (0) . . G-code (→G0 & G1: Move)
- 12:24, 29 March 2020 (diff | hist) . . (+276) . . G-code (→G0 & G1: Move)
- 12:17, 29 March 2020 (diff | hist) . . (0) . . G-code (→G-commands)
- 06:09, 28 March 2020 (diff | hist) . . (+458) . . G-code (→M486: Cancel Object)
- 07:33, 26 March 2020 (diff | hist) . . (+550) . . G-code (→M486: Cancel Object)
- 06:25, 9 March 2020 (diff | hist) . . (+171) . . G-code (→M402: Raise z-probe)
- 16:15, 8 March 2020 (diff | hist) . . (+170) . . G-code (→M401: Lower z-probe)
- 06:08, 3 March 2020 (diff | hist) . . (+613) . . G-code (→M409: Query object model)
- 11:36, 16 February 2020 (diff | hist) . . (+27) . . G-code (→M217: Toolchange Parameters)
- 07:40, 31 January 2020 (diff | hist) . . (+664) . . G-code (→M953: Set CAN-FD bus fast data rate)
- 07:31, 31 January 2020 (diff | hist) . . (-77) . . G-code (→M952: Set CAN-FD expansion board address and/or normal data rate)
- 06:10, 31 January 2020 (diff | hist) . . (0) . . m G-code (→M953: Set CAN-FD bus fast data rate: Corrected the example)
- 06:10, 31 January 2020 (diff | hist) . . (0) . . m G-code (→M952: Set CAN-FD expansion board address and/or normal data rate)
- 06:06, 31 January 2020 (diff | hist) . . (+662) . . m G-code (→M952: Set CAN-FD expansion board address and/or normal data rate)
- 05:59, 31 January 2020 (diff | hist) . . (-1,184) . . G-code (Swapped M952 and M953)
- 05:58, 31 January 2020 (diff | hist) . . (+1,184) . . G-code (Swapped M952 and M953)
- 05:45, 31 January 2020 (diff | hist) . . (+158) . . G-code (→M953: Set CAN-FD expansion board address and/or normal data rate)
- 05:44, 31 January 2020 (diff | hist) . . (+5) . . G-code (→M952: Set CAN-FD bus data rate)
- 05:42, 31 January 2020 (diff | hist) . . (+336) . . G-code (→M953: Change CAN-FD expansion board address)
- 05:01, 25 January 2020 (diff | hist) . . (+13) . . G-code (→M952: Set CAN-FD bus data rate)
- 07:12, 17 January 2020 (diff | hist) . . (+334) . . m G-code (→M98: Call Macro/Subprogram)
- 07:05, 17 January 2020 (diff | hist) . . (+10) . . G-code (→M104: Set Extruder Temperature)
- 07:04, 17 January 2020 (diff | hist) . . (+115) . . G-code (→M409: Query object model)
- 15:21, 15 January 2020 (diff | hist) . . (+117) . . RepRap Firmware (→RepRap Firmware Use) (current)
- 15:12, 15 January 2020 (diff | hist) . . (+562) . . G-code (Added section Conditional Execution and Loops)
- 07:14, 13 January 2020 (diff | hist) . . (+89) . . m G-code (→M409: Query object model)
- 07:11, 13 January 2020 (diff | hist) . . (+1,793) . . G-code (Added M409)
- 09:28, 13 December 2019 (diff | hist) . . (-210) . . RepRap Firmware (→Introduction)
- 09:27, 13 December 2019 (diff | hist) . . (-479) . . RepRap Firmware (→Configuration)
- 09:23, 13 December 2019 (diff | hist) . . (+1,303) . . RepRap Firmware (Added Generations section)
- 09:10, 13 December 2019 (diff | hist) . . (+405) . . RepRap Firmware (→Innovative features)
- 09:07, 13 December 2019 (diff | hist) . . (+110) . . RepRap Firmware (→Compatible hardware)
- 09:03, 13 December 2019 (diff | hist) . . (+300) . . RepRap Firmware (→Printer geometries and adjustment)
- 11:18, 8 December 2019 (diff | hist) . . (+851) . . G-code (→M669: Set kinematics type and kinematics parameters)
- 11:08, 8 December 2019 (diff | hist) . . (+280) . . G-code (→M667: Select CoreXY mode)
- 11:01, 8 December 2019 (diff | hist) . . (-1) . . G-code (→M650: Set peel move parameters)
- 11:01, 8 December 2019 (diff | hist) . . (+125) . . G-code (→M651: execute peel move)
- 11:00, 8 December 2019 (diff | hist) . . (+105) . . G-code (→M650: Set peel move parameters)
- 10:58, 8 December 2019 (diff | hist) . . (+316) . . G-code (→M122: Diagnose (RepRapFirmware))
- 10:54, 8 December 2019 (diff | hist) . . (+167) . . G-code (→M115: Get Firmware Version and Capabilities)
- 10:50, 8 December 2019 (diff | hist) . . (+275) . . G-code (→M950: Create heater, fan or GPIO/servo device)
- 10:45, 8 December 2019 (diff | hist) . . (+34) . . G-code (→M916: Set TMC2130 Stallguard sensitivity threshold)
- 10:43, 8 December 2019 (diff | hist) . . (+34) . . G-code (→M911: Set TMC2130 holding currents)
- 10:43, 8 December 2019 (diff | hist) . . (-4) . . G-code (→M910: Set decay mode)
- 10:42, 8 December 2019 (diff | hist) . . (+61) . . G-code (→M915: Set TMC2130 silent mode)
- 10:38, 8 December 2019 (diff | hist) . . (-3) . . G-code (→M851 in RepRapFirmware 2.02RC5 and later)
- 10:37, 8 December 2019 (diff | hist) . . (+9) . . G-code (→M861 Set Probe Thermal Compensation)
- 10:35, 8 December 2019 (diff | hist) . . (+3) . . G-code (→M3: Spindle On, Clockwise (CNC specific))
- 10:34, 8 December 2019 (diff | hist) . . (0) . . m G-code (→M3: Spindle On, Clockwise (CNC specific))
- 10:34, 8 December 2019 (diff | hist) . . (+257) . . G-code (→M3: Spindle On, Clockwise (CNC specific))
- 05:19, 16 November 2019 (diff | hist) . . (+690) . . G-code (Added M953)
- 08:00, 17 September 2019 (diff | hist) . . (+1,078) . . G-code (→M951: Set height following mode parameters)
- 07:49, 17 September 2019 (diff | hist) . . (+186) . . G-code (→M997: Perform in-application firmware update)
- 07:40, 17 September 2019 (diff | hist) . . (+1) . . G-code (→M308: Set or report sensor parameters)
- 07:40, 17 September 2019 (diff | hist) . . (+3) . . m G-code (→M308: Set or report sensor parameters)
- 07:37, 17 September 2019 (diff | hist) . . (+815) . . G-code (Added M594)
- 07:29, 17 September 2019 (diff | hist) . . (0) . . G-code (→M950: Set height following mode parameters)
- 07:29, 17 September 2019 (diff | hist) . . (+2,726) . . G-code (Added M950 and M951)
- 13:54, 7 July 2019 (diff | hist) . . (+2) . . m G-code (→M308: Set or report sensor parameters)
- 13:54, 7 July 2019 (diff | hist) . . (0) . . m G-code (→M308: Set or report sensor parameters)
- 13:53, 7 July 2019 (diff | hist) . . (+3,736) . . G-code (Added M308)
- 06:51, 21 February 2019 (diff | hist) . . (+45) . . G-code (→M555: Set compatibility)
- 06:49, 21 February 2019 (diff | hist) . . (+30) . . G-code (→M552: Set IP address, enable/disable network interface)
- 06:48, 21 February 2019 (diff | hist) . . (+138) . . G-code (→M540: Set MAC address)
- 06:45, 21 February 2019 (diff | hist) . . (+3) . . G-code (→M504: Validate EEPROM)
- 06:44, 21 February 2019 (diff | hist) . . (+8) . . G-code (→M504: Validate EEPROM)
- 06:43, 21 February 2019 (diff | hist) . . (+2) . . G-code (→M471: Rename File/Directory on SD-Card)
- 06:06, 21 February 2019 (diff | hist) . . (+1,164) . . G-code (→M504: Validate EEPROM)
- 05:45, 17 December 2018 (diff | hist) . . (+25) . . G-code (→M291: Display message and optionally wait for response)
- 05:44, 17 December 2018 (diff | hist) . . (+171) . . G-code (→M291: Display message and optionally wait for response)
- 07:15, 16 December 2018 (diff | hist) . . (+78) . . G-code (→M144: Bed Standby)
- 05:03, 16 December 2018 (diff | hist) . . (-1) . . G-code (→M851 in RepRapFirmware 2.02RC5 and later)
- 04:58, 16 December 2018 (diff | hist) . . (+209) . . G-code (→M605: Set dual x-carriage movement mode)
- 04:55, 16 December 2018 (diff | hist) . . (+540) . . G-code (Added M650, M651)
- 09:36, 6 December 2018 (diff | hist) . . (+10) . . G-code (Moved the recently-added M540 description for Marlin until after the original M540 definition that predates it by 5 years)
- 09:30, 6 December 2018 (diff | hist) . . (-944) . . G-code (Undid previous change (M454))
- 09:07, 6 December 2018 (diff | hist) . . (+944) . . G-code (→M453: Select CNC Printer Mode)
- 17:46, 28 November 2018 (diff | hist) . . (-17) . . G-code (→M572: Set or report extruder pressure advance)
- 17:44, 28 November 2018 (diff | hist) . . (+10) . . G-code (→M365: SCARA scaling factor)
- 17:43, 28 November 2018 (diff | hist) . . (+102) . . G-code (→G0 & G1: Move)
- 17:40, 28 November 2018 (diff | hist) . . (+84) . . G-code (→G0 & G1: Move)
- 17:39, 28 November 2018 (diff | hist) . . (+139) . . G-code (→G0 & G1: Move)
- 17:37, 28 November 2018 (diff | hist) . . (+1) . . G-code (→G2 & G3: Controlled Arc Move)
- 17:37, 28 November 2018 (diff | hist) . . (-1) . . G-code (→G6: Direct Stepper Move)
- 17:36, 28 November 2018 (diff | hist) . . (-13) . . G-code (→G10: Retract)
- 17:35, 28 November 2018 (diff | hist) . . (+3) . . G-code (→G12: Clean Tool)
- 17:35, 28 November 2018 (diff | hist) . . (-13) . . G-code (→G11: Unretract)
- 17:34, 28 November 2018 (diff | hist) . . (-1) . . G-code (→G29: Detailed Z-Probe)
- 17:33, 28 November 2018 (diff | hist) . . (+1) . . G-code (→G29 Auto Bed Compensation(RepRapFirmware))
- 17:31, 28 November 2018 (diff | hist) . . (-1) . . G-code (→G33: Delta Auto Calibration (Marlin 1.1.x or MK4duo))
- 17:31, 28 November 2018 (diff | hist) . . (+247) . . G-code (→G53..59: Coordinate System Select (CNC specific))
- 17:29, 28 November 2018 (diff | hist) . . (-5) . . G-code (→G61: Apply/restore saved coordinates to the active extruder.)
- 17:28, 28 November 2018 (diff | hist) . . (+51) . . G-code (→G60: save current position to slot)
- 17:27, 28 November 2018 (diff | hist) . . (-1) . . G-code (→G53..59: Coordinate System Select (CNC specific))
- 17:24, 28 November 2018 (diff | hist) . . (+255) . . G-code (→M36: Return file information)
- 17:19, 28 November 2018 (diff | hist) . . (+63) . . G-code (→M37: Simulation mode)
- 17:17, 28 November 2018 (diff | hist) . . (+15) . . G-code (→M39 Report SD card information)
- 17:17, 28 November 2018 (diff | hist) . . (+30) . . G-code (→M39 Report SD card information)
- 17:14, 28 November 2018 (diff | hist) . . (+1) . . G-code (→M93: Send axis_steps_per_unit)
- 17:14, 28 November 2018 (diff | hist) . . (-2) . . G-code (→M93: Send axis_steps_per_unit)
- 17:11, 28 November 2018 (diff | hist) . . (0) . . G-code (→M136: Print PID settings to host)
- 17:09, 28 November 2018 (diff | hist) . . (+15) . . G-code (→M207: Calibrate z axis by detecting z max length)
- 17:09, 28 November 2018 (diff | hist) . . (-4) . . G-code (→M208: Set unretract length)
- 17:05, 28 November 2018 (diff | hist) . . (+10) . . G-code (→M406: Filament Sensor off)
- 17:04, 28 November 2018 (diff | hist) . . (+10) . . G-code (→M405: Filament Sensor on)
- 17:04, 28 November 2018 (diff | hist) . . (+10) . . G-code (→M410: Quick-Stop)
- 17:03, 28 November 2018 (diff | hist) . . (+10) . . G-code (→M412: Disable Filament Runout Detection)
- 17:02, 28 November 2018 (diff | hist) . . (+10) . . G-code (→M413: Power-Loss Recovery)
- 17:01, 28 November 2018 (diff | hist) . . (+21) . . G-code (→M524: Abort SD Printing)
- 16:59, 28 November 2018 (diff | hist) . . (+200) . . G-code (→M557: Set Z probe point or define probing grid)
- 16:54, 28 November 2018 (diff | hist) . . (+108) . . G-code (→M562: Reset temperature fault)
- 16:53, 28 November 2018 (diff | hist) . . (+69) . . G-code (→M563: Define or remove a tool)
- 16:52, 28 November 2018 (diff | hist) . . (+1) . . G-code (→M565: Set Z probe offset)
- 16:51, 28 November 2018 (diff | hist) . . (+1,219) . . G-code (→M569: Stepper driver control)
- 16:46, 28 November 2018 (diff | hist) . . (-105) . . G-code (→M568: Turn off/on tool mix ratios)
- 16:43, 28 November 2018 (diff | hist) . . (-4) . . G-code (→M163: Set weight of mixed material)
- 16:42, 28 November 2018 (diff | hist) . . (+10) . . G-code (→M165: Set multiple mix weights)
- 16:40, 28 November 2018 (diff | hist) . . (+168) . . G-code (→M206: Offset axes)
- 16:37, 28 November 2018 (diff | hist) . . (0) . . G-code (→M260: i2c Send Data)
- 16:35, 28 November 2018 (diff | hist) . . (+83) . . G-code (→M260: i2c Send Data)
- 16:31, 28 November 2018 (diff | hist) . . (+3) . . G-code (→M591: Configure filament sensing)
- 16:31, 28 November 2018 (diff | hist) . . (-1,272) . . G-code (→M591: Configure filament sensing)
- 16:26, 28 November 2018 (diff | hist) . . (+49) . . G-code (→M600: Filament change pause)
- 16:23, 28 November 2018 (diff | hist) . . (-195) . . G-code (→M667: Select CoreXY mode)
- 16:23, 28 November 2018 (diff | hist) . . (+46) . . G-code (→M669: Set kinematics type and kinematics parameters)
- 16:21, 28 November 2018 (diff | hist) . . (-5) . . G-code (→M671: Define positions of Z leadscrews or bed leveling screws)
- 16:18, 28 November 2018 (diff | hist) . . (+21) . . G-code (→M929: Start/stop event logging to SD card)
- 16:17, 28 November 2018 (diff | hist) . . (+215) . . G-code (→M997: Perform in-application firmware update)
- 16:14, 28 November 2018 (diff | hist) . . (+24) . . G-code (→M918: Configure direct-connect display)
- 16:13, 28 November 2018 (diff | hist) . . (-133) . . G-code (→M916: Resume print after power failure)
- 16:12, 28 November 2018 (diff | hist) . . (+80) . . G-code (→M913: Set motor percentage of normal current)
- 16:11, 28 November 2018 (diff | hist) . . (+16) . . G-code (→M911: Configure auto save on loss of power)
- 16:10, 28 November 2018 (diff | hist) . . (-1,062) . . G-code (→M911: Configure auto save on loss of power)
- 16:07, 28 November 2018 (diff | hist) . . (+14) . . G-code (→M910: Set decay mode)
- 16:06, 28 November 2018 (diff | hist) . . (-451) . . G-code (→M906: Set motor currents)
- 16:04, 28 November 2018 (diff | hist) . . (+177) . . G-code (→M900 Set Linear Advance Scaling Factors)
- 16:00, 28 November 2018 (diff | hist) . . (+340) . . G-code (→M851: Set Z-Probe Offset)
- 16:19, 20 November 2018 (diff | hist) . . (+55) . . Arduino Mega Pololu Shield (→Overheating 5V regulator on the Arduino Mega) (current)
- 16:18, 20 November 2018 (diff | hist) . . (+245) . . Arduino Mega Pololu Shield (→Melting heatbed connectors.)
- 07:22, 14 October 2018 (diff | hist) . . (-16) . . G-code (→M27: Report SD print status)
- 07:17, 14 October 2018 (diff | hist) . . (+332) . . G-code (→Probe and calculate in Reprapfirmware)
- 07:11, 14 October 2018 (diff | hist) . . (+375) . . G-code (→G10: Tool Offset)
- 07:03, 14 October 2018 (diff | hist) . . (-192) . . G-code (→G10: Tool Offset)
- 06:58, 14 October 2018 (diff | hist) . . (+22) . . G-code (→G6: Direct Stepper Move)
- 06:56, 14 October 2018 (diff | hist) . . (+63) . . G-code (→G12: Clean Tool)
- 06:54, 14 October 2018 (diff | hist) . . (+107) . . G-code (→G12: Clean Tool)
- 14:34, 13 October 2018 (diff | hist) . . (-935) . . G-code (Deleted entry for M583 because it wasn't implemented)
- 04:02, 13 October 2018 (diff | hist) . . (+106) . . G-code (→M600: Filament change pause)
- 05:19, 12 September 2018 (diff | hist) . . (+1) . . G-code (→M108: Cancel Heating (Marlin))
- 05:17, 12 September 2018 (diff | hist) . . (+128) . . G-code (→M98: Call Macro/Subprogram)
- 05:11, 12 September 2018 (diff | hist) . . (+1) . . G-code (→M5: Spindle Off (CNC specific))
- 05:09, 12 September 2018 (diff | hist) . . (+9) . . m G-code (→G33: Delta Auto Calibration (Marlin 1.1.x or MK4duo))
- 05:08, 12 September 2018 (diff | hist) . . (-935) . . G-code (→Probe and calculate in Reprapfirmware)
- 05:07, 12 September 2018 (diff | hist) . . (-421) . . G-code (→Probe and calculate in Reprapfirmware)
- 14:05, 10 August 2018 (diff | hist) . . (+11) . . m G-code (→M593: Configure Dynamic Acceleration Adjustment)
- 14:05, 10 August 2018 (diff | hist) . . (+62) . . G-code (→M593: Configure Dynamic Acceleration Adjustment)
- 14:03, 10 August 2018 (diff | hist) . . (-4) . . G-code (→M593: Configure Dynamic Ringing Cancellation)
- 14:00, 10 August 2018 (diff | hist) . . (+84) . . G-code (→M593: Configure Dynamic Ringing Cancellation)
- 07:51, 25 July 2018 (diff | hist) . . (+1,755) . . G-code (→M592: Configure nonlinear extrusion)
- 09:37, 18 July 2018 (diff | hist) . . (+218) . . G-code (→M150: Set display color)
- 09:16, 18 July 2018 (diff | hist) . . (+71) . . G-code (→M150: Set display color)
- 04:02, 27 April 2018 (diff | hist) . . (+645) . . G-code (→M569: Set motor driver direction, enable polarity and step pulse timing)
- 03:44, 27 April 2018 (diff | hist) . . (-906) . . G-code (→M352: Set stepper driver mode)
- 15:05, 26 April 2018 (diff | hist) . . (+906) . . G-code (→M351: Toggle MS1 MS2 pins directly)
- 14:37, 26 April 2018 (diff | hist) . . (+22) . . G-code (→G29 Auto Bed Leveling (RepRapFirmware))
- 11:54, 24 March 2018 (diff | hist) . . (+321) . . G-code (→M564: Limit axes)
- 05:13, 18 March 2018 (diff | hist) . . (+1,729) . . G-code (→M591: Configure filament sensing)
- 05:34, 17 March 2018 (diff | hist) . . (+3) . . G-code (→M569: Set axis direction and enable values)
- 05:20, 17 March 2018 (diff | hist) . . (-94) . . G-code (→M569: Set axis direction and enable values)
- 04:37, 6 March 2018 (diff | hist) . . (+147) . . G-code (→M558: Set Z probe type)
- 07:35, 3 March 2018 (diff | hist) . . (0) . . G-code (→M591: Configure filament sensing)
- 13:43, 26 February 2018 (diff | hist) . . (0) . . G-code (→G54..59: Coordinate System Select (CNC specific))
- 13:34, 26 February 2018 (diff | hist) . . (+59) . . G-code (→G61: Apply/restore saved coordinates to the active extruder.)
- 13:32, 26 February 2018 (diff | hist) . . (+362) . . G-code (→G60: save current position to slot)
- 13:26, 26 February 2018 (diff | hist) . . (+16) . . G-code (→G54..59: Coordinate System Select (CNC specific))
- 16:40, 18 February 2018 (diff | hist) . . (+160) . . G-code (→M915: Configure motor stall detection)
- 13:11, 11 February 2018 (diff | hist) . . (-12) . . Kossel (→Links)
- 05:45, 9 February 2018 (diff | hist) . . (+170) . . G-code (→M563: Define or remove a tool)
- 18:19, 5 February 2018 (diff | hist) . . (+751) . . G-code (Added M918)
- 13:18, 14 January 2018 (diff | hist) . . (+2) . . G-code (→M260: i2c Send Data)
- 13:16, 14 January 2018 (diff | hist) . . (+71) . . G-code (→M261: i2c Request Data)
- 13:12, 14 January 2018 (diff | hist) . . (+16) . . G-code (→M261: i2c Request Data)
- 11:46, 14 January 2018 (diff | hist) . . (+11) . . G-code (→M290: Babystepping)
- 11:43, 14 January 2018 (diff | hist) . . (+458) . . G-code (→M290: Babystepping)
- 09:29, 14 January 2018 (diff | hist) . . (+65) . . G-code (→M290: Babystepping)
- 08:27, 14 January 2018 (diff | hist) . . (-4) . . G-code (→M260: i2c Send Data)
- 08:23, 14 January 2018 (diff | hist) . . (+568) . . G-code (→M260: i2c Send Data)
- 16:34, 6 January 2018 (diff | hist) . . (-86) . . G-code (→M574: Set endstop configuration)
- 16:29, 6 January 2018 (diff | hist) . . (+132) . . G-code (→M574: Set endstop configuration)
- 10:31, 6 January 2018 (diff | hist) . . (+261) . . G-code (→M591: Configure filament sensing)
- 07:54, 2 January 2018 (diff | hist) . . (+18) . . G-code (→M420: Leveling On/Off/Fade (Marlin))
- 14:40, 1 January 2018 (diff | hist) . . (+92) . . G-code (→M592: Configure nonlinear extrusion)
- 07:43, 1 January 2018 (diff | hist) . . (-150) . . G-code (→M592: Configure nonlinear extrusion)
- 07:06, 1 January 2018 (diff | hist) . . (+1,845) . . G-code (Added M592)
- 16:04, 29 December 2017 (diff | hist) . . (0) . . m G-code (→M39 Report SD card information)
- 08:40, 28 December 2017 (diff | hist) . . (+358) . . G-code (→M307: Set or report heating process parameters)
- 08:17, 28 December 2017 (diff | hist) . . (+1,131) . . G-code (→M38 Compute SHA1 hash of target file)
- 07:15, 28 December 2017 (diff | hist) . . (+330) . . G-code (→M37: Simulation mode)
- 13:18, 27 December 2017 (diff | hist) . . (+197) . . G-code (apFirmware)
- 11:32, 20 December 2017 (diff | hist) . . (+53) . . G-code (→M500: Store parameters in EEPROM)
- 16:31, 15 December 2017 (diff | hist) . . (+158) . . G-code (→M570: Configure heater fault detection)
- 07:43, 8 December 2017 (diff | hist) . . (+250) . . G-code (→M81: ATX Power Off)
- 19:27, 7 December 2017 (diff | hist) . . (+32) . . G-code (→M33: Stop and Close File and save restart.gcode)
- 19:23, 7 December 2017 (diff | hist) . . (+13) . . G-code (→M33: Get the long name for an SD card file or folder)
- 05:39, 2 December 2017 (diff | hist) . . (+209) . . G-code (→Proposed EEPROM configuration codes)
- 05:35, 2 December 2017 (diff | hist) . . (+53) . . G-code (→Replies from the RepRap machine to the host computer)
- 05:29, 2 December 2017 (diff | hist) . . (-111) . . G-code (→M301: Set PID parameters)
- 05:23, 2 December 2017 (diff | hist) . . (+460) . . G-code (→RepRapFirmware (v1.09 onwards))
- 05:15, 2 December 2017 (diff | hist) . . (+10) . . G-code (→M246: Stop cooler)
- 05:14, 2 December 2017 (diff | hist) . . (+10) . . G-code (→M245: Start cooler)
- 19:27, 24 November 2017 (diff | hist) . . (+541) . . G-code (→M669: Set kinematics type and kinematics parameters)
- 06:43, 7 November 2017 (diff | hist) . . (+1,041) . . G-code (Added M917)
- 10:07, 1 November 2017 (diff | hist) . . (+1,486) . . G-code (→M911: Configure auto save on loss of power)
- 10:01, 1 November 2017 (diff | hist) . . (+11) . . G-code (→M915: Configure motor stall detection)
- 09:06, 28 October 2017 (diff | hist) . . (+238) . . G-code (→Comments)
- 10:26, 21 October 2017 (diff | hist) . . (+258) . . G-code (→M26: Set SD position)
- 09:12, 21 October 2017 (diff | hist) . . (-407) . . G-code (→M208: Set axis max travel)
- 08:46, 21 October 2017 (diff | hist) . . (+14) . . G-code (→M585: Probe Tool)
- 07:08, 21 October 2017 (diff | hist) . . (+6) . . m G-code (corrected typo and emboldened some text)
- 07:13, 17 October 2017 (diff | hist) . . (+1,223) . . G-code (Added M916, corrected parameter letters in M915)
- 06:06, 17 October 2017 (diff | hist) . . (-7) . . G-code (→M911: Enable auto save and set threshold voltages)
- 16:47, 13 October 2017 (diff | hist) . . (+11) . . G-code (→M669: Set kinematics type and kinematics parameters)
- 05:15, 11 October 2017 (diff | hist) . . (+45) . . Comparison of Electronics
- 05:07, 11 October 2017 (diff | hist) . . (+286) . . Comparison of Electronics
- 09:36, 10 October 2017 (diff | hist) . . (+212) . . G-code (→M915: Configure motor stall detection)
- 09:33, 10 October 2017 (diff | hist) . . (+1,451) . . G-code (Added M915)
- 08:27, 10 October 2017 (diff | hist) . . (+139) . . G-code (→M900 Set Linear Advance Scaling Factors)
- 08:23, 10 October 2017 (diff | hist) . . (-4) . . G-code (→M851: Set Z-Probe Offset)
- 05:55, 10 October 2017 (diff | hist) . . (+1) . . G-code (→M900 Set Linear Advance Scaling Factors)
- 05:51, 10 October 2017 (diff | hist) . . (+9) . . G-code (→M900 Set Linear Advance Scaling Factors)
- 06:02, 7 October 2017 (diff | hist) . . (+476) . . G-code (→Quoted strings)
- 07:31, 30 September 2017 (diff | hist) . . (+16) . . G-code (→M453: Select CNC Printer Mode)
- 07:26, 30 September 2017 (diff | hist) . . (+16) . . G-code (→M452: Select Laser Printer Mode)
- 07:25, 30 September 2017 (diff | hist) . . (+16) . . G-code (→M451: Select FFF Printer Mode)
- 07:23, 30 September 2017 (diff | hist) . . (+16) . . G-code (→M450: Report Printer Mode)
- 12:37, 29 September 2017 (diff | hist) . . (0) . . RepRap Firmware Status responses (current)
- 12:37, 29 September 2017 (diff | hist) . . (-167) . . RepRap Firmware Status responses
- 11:30, 29 September 2017 (diff | hist) . . (+1,039) . . G-code (Added quoted strings)
- 12:25, 21 September 2017 (diff | hist) . . (-1) . . G-code (→M929: Start/stop event logging to SD card)
- 03:32, 21 September 2017 (diff | hist) . . (+111) . . DuetWifi
- 03:28, 21 September 2017 (diff | hist) . . (+769) . . Comparison of Electronics (Updated Duet WiFi specs, added Duet Ethernet)
- 05:21, 20 September 2017 (diff | hist) . . (+578) . . G-code (→M305: Set thermistor and ADC parameters)
- 03:24, 20 September 2017 (diff | hist) . . (+942) . . G-code (→M928: Start SD logging)
- 08:16, 14 August 2017 (diff | hist) . . (0) . . G-code (→M591: Configure filament sensing)
- 05:55, 14 August 2017 (diff | hist) . . (-23) . . G-code (→M591: Configure filament sensing)
- 16:29, 12 August 2017 (diff | hist) . . (-129) . . G-code (→M591: Configure filament sensing)
- 08:35, 8 August 2017 (diff | hist) . . (+115) . . G-code (→M591: Configure filament sensing)
- 05:11, 7 August 2017 (diff | hist) . . (+642) . . G-code (→M671: Define Z leadscrew positions)
- 13:36, 22 July 2017 (diff | hist) . . (+76) . . G-code (→M584: Set drive mapping)
- 13:27, 22 July 2017 (diff | hist) . . (+22) . . G-code (→M700: Level plate)
- 13:26, 22 July 2017 (diff | hist) . . (0) . . m G-code (→M672: program Z probe)
- 07:29, 21 July 2017 (diff | hist) . . (+679) . . G-code (→M671: Define Z leadscrew positions)
- 01:46, 21 July 2017 (diff | hist) . . (+30) . . G-code (→M669: Set kinematics type and kinematics parameters)
- 13:06, 19 July 2017 (diff | hist) . . (+1,761) . . G-code (→M590: Report current tool type and index)
- 10:15, 16 July 2017 (diff | hist) . . (+1,549) . . G-code (→M200: Set filament diameter: Wrote a separate description for RepRapFirmware because the existing description is a mess. Left the original description in place for other firmwares.)
- 08:46, 16 July 2017 (diff | hist) . . (+1) . . m G-code (→M200: Set filament diameter)
- 12:44, 10 July 2017 (diff | hist) . . (+105) . . G-code (→M671: Define Z leadscrew positions)
- 04:52, 9 July 2017 (diff | hist) . . (+68) . . m G-code (→M911: Enable auto save and set threshold voltages)
- 04:49, 9 July 2017 (diff | hist) . . (+554) . . G-code (→M911: Set power monitor threshold voltages)
- 03:18, 9 July 2017 (diff | hist) . . (+131) . . G-code (→M669: Set kinematics type and kinematics parameters)
- 13:22, 8 July 2017 (diff | hist) . . (+48) . . G-code (→M305: Set thermistor and ADC parameters)
- 13:19, 8 July 2017 (diff | hist) . . (+88) . . G-code (→M305: Set thermistor and ADC parameters)
- 13:06, 8 July 2017 (diff | hist) . . (+913) . . G-code (→M670: Set IO port bit mapping)
- 06:17, 27 June 2017 (diff | hist) . . (-54) . . G-code (→Buffering)
- 03:31, 25 June 2017 (diff | hist) . . (+19) . . Step rates (→By step rate achievable feedrates) (current)
- 06:11, 18 June 2017 (diff | hist) . . (+51) . . m G-code (→M291: Display message and optionally wait for response)
- 06:08, 18 June 2017 (diff | hist) . . (+24) . . G-code (→M291: Display message and optionally wait for response)
- 06:06, 18 June 2017 (diff | hist) . . (+1,794) . . G-code (Added M291, M292)
- 07:05, 17 June 2017 (diff | hist) . . (+10) . . G-code (→M460: Define temperature range for thermistor-controlled fan)
- 15:15, 16 June 2017 (diff | hist) . . (-5) . . m G-code (→M205: Advanced settings)
- 03:26, 15 June 2017 (diff | hist) . . (+869) . . G-code (→M669: Set kinematics type and kinematics parameters)
- 04:44, 28 May 2017 (diff | hist) . . (+474) . . G-code (→M913: Set motor percentage of normal current)
- 17:01, 8 May 2017 (diff | hist) . . (0) . . G-code (→M669: Set kinematics type and kinematics parameters)
- 16:18, 8 May 2017 (diff | hist) . . (-1) . . G-code (M669: Set kinematics type and kinematics parameters - corrected example)
- 16:16, 8 May 2017 (diff | hist) . . (-369) . . G-code (→M669: Set kinematics type and kinematics parameters)
- 13:08, 8 May 2017 (diff | hist) . . (0) . . m G-code (→M669: Set kinematics type and kinematics parameters)
- 13:06, 8 May 2017 (diff | hist) . . (+570) . . G-code (→M669: Set SCARA mode and arm parameters)
- 07:08, 23 April 2017 (diff | hist) . . (+1,703) . . G-code (Added M669)
- 11:57, 7 April 2017 (diff | hist) . . (-136) . . G-code (→M552: Set IP address)
- 10:19, 6 April 2017 (diff | hist) . . (+2,138) . . G-code (→M586: Configure network protocols)
- 07:53, 29 March 2017 (diff | hist) . . (+5) . . G-code (→M205: Advanced settings)
- 07:49, 29 March 2017 (diff | hist) . . (+389) . . G-code (→M204: Set default acceleration)
- 09:34, 9 March 2017 (diff | hist) . . (+79) . . G-code (→M586: Configure network protocols)
- 12:11, 8 March 2017 (diff | hist) . . (+4) . . G-code (→M600: Filament change pause)
- 12:08, 8 March 2017 (diff | hist) . . (+1,226) . . G-code (Added M586)
- 09:00, 8 March 2017 (diff | hist) . . (+156) . . Z probe (→Reflective / IR)
- 10:23, 28 February 2017 (diff | hist) . . (-1,280) . . RepRap Firmware (→General design principles)
- 10:06, 28 February 2017 (diff | hist) . . (+130) . . RepRap Firmware (→Configuration & commissioning)
- 10:00, 28 February 2017 (diff | hist) . . (+13) . . RepRap Firmware (→Innovative features)
- 10:00, 28 February 2017 (diff | hist) . . (+18) . . RepRap Firmware (→SD card)
- 09:51, 28 February 2017 (diff | hist) . . (+1,573) . . RepRap Firmware (→Printer geometries and adjustment)
- 09:31, 28 February 2017 (diff | hist) . . (+310) . . RepRap Firmware (→Overview)
- 15:30, 21 February 2017 (diff | hist) . . (+15) . . G-code (→M290: Baby stepping)
- 12:17, 21 February 2017 (diff | hist) . . (+870) . . G-code (Added M290)
- 07:51, 8 February 2017 (diff | hist) . . (+270) . . G-code (→M584: Set drive mapping)
- 15:53, 7 February 2017 (diff | hist) . . (+16) . . Step rates (→Achievable step rates)
- 15:32, 31 January 2017 (diff | hist) . . (+282) . . Arduino Mega Pololu Shield (→Known issues and limitations)
- 19:22, 18 January 2017 (diff | hist) . . (+10) . . G-code (→G6: Direct Stepper Move)
- 09:12, 18 January 2017 (diff | hist) . . (+12) . . G-code (→M408: Report JSON-style response)
- 07:27, 15 January 2017 (diff | hist) . . (-13) . . G-code (→M103: Turn all extruders off, Extruder Retraction)
- 07:26, 15 January 2017 (diff | hist) . . (+50) . . G-code (→M101: Turn extruder 1 on (Forward), Undo Retraction)
- 07:25, 15 January 2017 (diff | hist) . . (+212) . . G-code (→M103: Turn all extruders off, Extruder Retraction)
- 07:12, 15 January 2017 (diff | hist) . . (+148) . . G-code (→M101: Turn extruder 1 on (Forward), Undo Retraction)
- 12:56, 28 December 2016 (diff | hist) . . (+129) . . G-code (→M501: Read parameters from EEPROM)
- 15:02, 20 December 2016 (diff | hist) . . (+337) . . G-code (→M143: Maximum hot-end temperature)
- 06:41, 12 December 2016 (diff | hist) . . (+990) . . G-code (Added M376)
- 06:22, 12 December 2016 (diff | hist) . . (+14) . . G-code (→M370: Morgan manual bed level - clear map)
- 06:17, 12 December 2016 (diff | hist) . . (-120) . . G-code (Undo revision 177708 by Dc42 (talk))
- 19:49, 11 December 2016 (diff | hist) . . (+120) . . G-code (→M370: Morgan manual bed level - clear map)
- 20:21, 10 December 2016 (diff | hist) . . (+1) . . m G-code (→M401: Lower z-probe)
- 20:19, 10 December 2016 (diff | hist) . . (+76) . . G-code (→M402: Raise z-probe)
- 20:17, 10 December 2016 (diff | hist) . . (+73) . . G-code (→M401: Lower z-probe)
- 12:45, 10 December 2016 (diff | hist) . . (+186) . . G-code (→G31: Set or Report Current Probe status)
- 09:28, 10 December 2016 (diff | hist) . . (+268) . . G-code (→M375: Display matrix / Load Matrix)
- 09:21, 10 December 2016 (diff | hist) . . (+10) . . G-code (→M374: Save calibration grid)
- 09:20, 10 December 2016 (diff | hist) . . (+6) . . G-code (→M374: Save calibration grid)
- 09:19, 10 December 2016 (diff | hist) . . (+580) . . G-code (→M374: Save calibration grid)
- 08:42, 10 December 2016 (diff | hist) . . (+51) . . G-code (→M557: Set Z probe point or define probing grid)
- 07:38, 10 December 2016 (diff | hist) . . (-9) . . G-code (→M581: Configure external trigger)
- 07:35, 10 December 2016 (diff | hist) . . (-9) . . G-code (→M582: Check external trigger)
- 07:23, 10 December 2016 (diff | hist) . . (-1) . . G-code (→M905: Set local date and time)
- 16:06, 9 December 2016 (diff | hist) . . (+204) . . G-code (→M557: Set Z probe point or define probing grid)
- 15:52, 9 December 2016 (diff | hist) . . (+242) . . G-code (→M408: Report JSON-style response)
- 04:44, 9 December 2016 (diff | hist) . . (+342) . . G-code (→M571: Set output on extrude)
- 14:26, 5 December 2016 (diff | hist) . . (+1) . . G-code (→M407: Display filament diameter)
- 14:09, 5 December 2016 (diff | hist) . . (+13) . . G-code (→M558: Set Z probe type)
- 13:53, 5 December 2016 (diff | hist) . . (-105) . . G-code (→M558: Set Z probe type)
- 13:40, 5 December 2016 (diff | hist) . . (+3) . . G-code (→M408: Report JSON-style response)
- 06:23, 5 December 2016 (diff | hist) . . (+236) . . G-code (→M408: Report JSON-style response)
- 03:42, 5 December 2016 (diff | hist) . . (+4) . . G-code (→M191: Wait for chamber temperature to reach target temp)
- 06:33, 4 December 2016 (diff | hist) . . (+285) . . G-code (→M571: Set output on extrude)
- 07:58, 3 December 2016 (diff | hist) . . (+320) . . G-code (→M574: Set endstop configuration)
- 03:59, 29 November 2016 (diff | hist) . . (+536) . . G-code (→M305: Set thermistor and ADC parameters)
- 15:28, 20 November 2016 (diff | hist) . . (+397) . . G-code (→G29: Detailed Z-Probe)
- 15:25, 20 November 2016 (diff | hist) . . (+23) . . G-code (→M557: Set Z probe point)
- 04:24, 18 November 2016 (diff | hist) . . (+705) . . G-code (→M557: Set Z probe point)
- 04:13, 18 November 2016 (diff | hist) . . (+100) . . G-code (→G29: Detailed Z-Probe)
- 04:10, 18 November 2016 (diff | hist) . . (+84) . . G-code (→G29: Detailed Z-Probe)
- 15:56, 10 November 2016 (diff | hist) . . (-897) . . G-code (→M569: Set axis direction and enable values)
- 02:47, 10 November 2016 (diff | hist) . . (+12) . . G-code (→M207: Set retract length)
- 02:44, 10 November 2016 (diff | hist) . . (+13) . . G-code (→M212: Set Bed Level Sensor Offset)
- 02:38, 10 November 2016 (diff | hist) . . (0) . . m G-code (→M280: Set servo position)
- 12:55, 8 November 2016 (diff | hist) . . (+199) . . G-code (→G30: Single Z-Probe)
- 11:12, 8 November 2016 (diff | hist) . . (+51) . . Step rates (→Achievable step rates)
- 06:34, 7 November 2016 (diff | hist) . . (+507) . . G-code (→M280: Set servo position)
- 13:30, 3 November 2016 (diff | hist) . . (+99) . . G-code (→M558: Set Z probe type)
- 10:30, 3 November 2016 (diff | hist) . . (+199) . . G-code (→M106: Fan On)
- 10:59, 2 November 2016 (diff | hist) . . (+190) . . G-code (→M563: Define or remove a tool)
- 06:28, 31 October 2016 (diff | hist) . . (+203) . . G-code (→M221: Set extrude factor override percentage)
- 10:12, 27 October 2016 (diff | hist) . . (+113) . . G-code (→M207: Set retract length)
- 13:02, 26 October 2016 (diff | hist) . . (+188) . . G-code (→M106: Fan On)
- 12:58, 26 October 2016 (diff | hist) . . (+69) . . G-code (→M307: Set or report heating process parameters)
- 12:56, 26 October 2016 (diff | hist) . . (+11) . . G-code (→M307: Set or report heating process parameters)
- 07:45, 26 October 2016 (diff | hist) . . (+222) . . G-code (→M280: Set servo position)
- 06:31, 23 October 2016 (diff | hist) . . (+94) . . G-code (→M566: Set allowable instantaneous speed change: Brought up to date)
- 16:09, 19 October 2016 (diff | hist) . . (+612) . . G-code (→M106: Fan On)
- 08:44, 18 October 2016 (diff | hist) . . (+241) . . G-code (→M307: Set or report heating process parameters)
- 08:39, 18 October 2016 (diff | hist) . . (-21) . . G-code (→M42: Switch I/O pin)
- 08:28, 18 October 2016 (diff | hist) . . (-12) . . G-code (→M38 Compute SHA1 hash of target file)
- 08:27, 18 October 2016 (diff | hist) . . (-9) . . G-code (→M37: Simulation mode)
- 08:21, 18 October 2016 (diff | hist) . . (+355) . . G-code (→G10: Tool Offset)
- 08:16, 18 October 2016 (diff | hist) . . (+138) . . G-code (→M666: Set delta endstop adjustment)
- 08:12, 18 October 2016 (diff | hist) . . (+360) . . G-code (→M584: Set drive mapping)
- 08:06, 18 October 2016 (diff | hist) . . (+725) . . G-code (→M563: Define or remove a tool)
- 07:54, 18 October 2016 (diff | hist) . . (0) . . G-code (→M605: Set dual x-carriage movement mode)
- 07:52, 18 October 2016 (diff | hist) . . (-91) . . G-code (→M584: Set drive mapping)
- 07:51, 18 October 2016 (diff | hist) . . (+268) . . G-code (→M584: Set drive mapping)
- 07:11, 18 October 2016 (diff | hist) . . (+57) . . RepRap Firmware macros (→Stop a print: stop.g)
- 17:25, 16 October 2016 (diff | hist) . . (+58) . . G-code (→Fields)
- 06:45, 16 October 2016 (diff | hist) . . (-74) . . G-code (→M111: Set Debug Level)
- 06:40, 16 October 2016 (diff | hist) . . (+89) . . G-code (→M92: Set axis_steps_per_unit)
- 06:37, 16 October 2016 (diff | hist) . . (+9) . . G-code (→M93: Send axis_steps_per_unit)
- 06:43, 15 October 2016 (diff | hist) . . (0) . . Step rates (→Achievable step rates)
- 06:42, 15 October 2016 (diff | hist) . . (+279) . . Step rates (→By step rate achievable feedrates)
- 06:30, 15 October 2016 (diff | hist) . . (+357) . . Step rates (→Achievable step rates)
- 06:24, 15 October 2016 (diff | hist) . . (+985) . . Step rates (→By step rate achievable feedrates)
- 06:34, 12 October 2016 (diff | hist) . . (0) . . m Step rates (→Achievable step rates)
- 06:32, 12 October 2016 (diff | hist) . . (+164) . . Step rates (→Achievable step rates)
- 11:28, 8 October 2016 (diff | hist) . . (+48) . . G-code (→G4: Dwell)
- 13:28, 30 September 2016 (diff | hist) . . (+730) . . G-code (→M570: Set heater timeout)
- 14:29, 21 August 2016 (diff | hist) . . (+154) . . G-code (→M20: List SD card)
- 04:48, 20 August 2016 (diff | hist) . . (0) . . G-code (→M307: Set or report heating process parameters)
- 04:40, 20 August 2016 (diff | hist) . . (0) . . G-code (→M307: Set or report heating process parameters)
- 04:38, 20 August 2016 (diff | hist) . . (0) . . G-code (→M307: Set or report heating process parameters)
- 04:27, 20 August 2016 (diff | hist) . . (+337) . . G-code (→M307: Set or report heating process parameters)
- 14:21, 18 August 2016 (diff | hist) . . (0) . . G-code (→M307: Set or report heating process parameters)
- 13:15, 18 August 2016 (diff | hist) . . (0) . . G-code (→M303: Run PID tuning)
- 13:11, 18 August 2016 (diff | hist) . . (+23) . . G-code (→M307: Set or report heating process parameters)
- 15:16, 16 August 2016 (diff | hist) . . (0) . . G-code (→M303: Run PID tuning)
- 15:14, 16 August 2016 (diff | hist) . . (+342) . . G-code (→M303: Run PID tuning)
- 15:05, 16 August 2016 (diff | hist) . . (+1,127) . . G-code (Addede M307)
- 18:03, 7 August 2016 (diff | hist) . . (+14) . . G-code (→M211: Disable/Enable software endstops)
- 18:01, 7 August 2016 (diff | hist) . . (-19) . . G-code (→M218: Set Hotend Offset)
- 17:58, 7 August 2016 (diff | hist) . . (-6) . . G-code (→M210: Set homing feedrates)
- 17:54, 7 August 2016 (diff | hist) . . (+14) . . G-code (→M163: Set weight of mixed material)
- 09:22, 7 August 2016 (diff | hist) . . (+102) . . G-code (→M22: Release SD card)
- 09:20, 7 August 2016 (diff | hist) . . (+98) . . G-code (→M21: Initialize SD card)
- 09:16, 7 August 2016 (diff | hist) . . (-31) . . G-code (→M20: List SD card)
- 16:34, 3 August 2016 (diff | hist) . . (+54) . . G-code (→M143: Maximum hot-end temperature)
- 10:45, 30 July 2016 (diff | hist) . . (+143) . . G-code (→M303: Run PID tuning)
- 06:02, 26 July 2016 (diff | hist) . . (-3) . . G-code (→M304: Set PID parameters - Bed)
- 19:41, 11 July 2016 (diff | hist) . . (+464) . . G-code (→G30: Single Z-Probe)
- 12:01, 2 July 2016 (diff | hist) . . (+1) . . m G-code (→M569: Set axis direction and enable values)
- 11:33, 1 July 2016 (diff | hist) . . (+26) . . G-code (→M569: Set axis direction and enable values)
- 11:31, 1 July 2016 (diff | hist) . . (+535) . . G-code (→M569: Set axis direction and enable values)
- 11:03, 1 July 2016 (diff | hist) . . (+959) . . G-code (Added M913)
- 07:07, 30 June 2016 (diff | hist) . . (0) . . Using PT100 temperature sensors with the Duet and RepRapFirmware (→Troubleshooting) (current)
- 07:06, 30 June 2016 (diff | hist) . . (-1) . . Using PT100 temperature sensors with the Duet and RepRapFirmware (→Troubleshooting)
- 06:59, 30 June 2016 (diff | hist) . . (-224) . . Using PT100 temperature sensors with the Duet and RepRapFirmware (→Firmware configuration)
(newest | oldest) View (newer 500 | older 500) (20 | 50 | 100 | 250 | 500)