File list
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 14:24, 8 February 2008 | DarwinPartDevelopment-Y-Housing-Square-Top.stl (file) |  |
628 KB | Strengthened Y bearing housing with squared top. | 1 |
| 14:23, 8 February 2008 | DarwinPartDevelopment-corner-bracket-degroof-vik.stl (file) | |
784 KB | STL of strengthened corner bracket. Vik has AOI file. | 1 |
| 13:10, 15 January 2008 | DarwinPartDevelopment-Bed-corner-1.1.stl (file) | |
895 KB | Bed Corner modified to use no support material | 1 |
| 13:09, 15 January 2008 | DarwinPartDevelopment-Diagonal-tie-bracket-1.1.stl (file) | |
564 KB | Diagonal Tie Bracket designed to use no support material | 1 |
| 07:20, 17 November 2007 | DarwinPartDevelopment-Z-toothed-pulley-rim-1.1.stl (file) | |
2.05 MB | Z-toothed-pulley-rim thickened for printing on RepRap | 1 |
| 07:14, 17 November 2007 | DarwinPartDevelopment-XY-pulley-idler-1.1.stl (file) | |
730 KB | XY-pulley-idler modified to print without support | 1 |
| 07:14, 17 November 2007 | DarwinPartDevelopment-XY-pulley-idler-1.1.aoi (file) | |
85 KB | XY-pulley-idler modified to print without support | 1 |
| 07:06, 17 November 2007 | DarwinPartDevelopment-X-idler-bracket-1.1.stl (file) | |
1.11 MB | X-idler-bracket modified to print without support. | 1 |
| 07:05, 17 November 2007 | DarwinPartDevelopment-X-idler-bracket-1.1.aoi (file) | |
173 KB | X-idler-bracket modified to print without support. | 1 |
| 12:32, 17 October 2007 | AssemblingDarwinMachinery-17.JPG (file) |  |
35 KB | x axis complete | 1 |
| 12:29, 4 June 2007 | UniversalControllerBoard 1 2-grtg V12 bodge.jpg (file) |  |
38 KB | How to bodge the TX Rx connectors on the V1.2 board | 1 |
| 03:26, 15 March 2007 | StepperMotor-unipolar stepper sch.png (file) |  |
2 KB | Schematic of unipolar stepper motor | 1 |
| 03:25, 15 March 2007 | StepperMotor-bipolar stepper sch.png (file) |  |
1 KB | Schematic of bipolar stepper motor | 1 |
| 13:21, 7 March 2007 | ShowCase-first extruded extruder.jpg (file) |  |
57 KB | The first extruded extruder. | 1 |
| 01:48, 18 February 2007 | HandmadeGears-mould and hole saw sml.jpg (file) |  |
45 KB | Small image of mould and hole saw | 1 |
| 01:44, 18 February 2007 | HandmadeGears-dsc03015.jpg (file) |  |
813 KB | Mould and hole saw | 1 |
| 20:51, 2 January 2007 | BlogPhotosFromVik-mov02791.mpg (file) | |
2.37 MB | Short movie of reprapped 16-tooth gears meshig | 1 |
| 17:10, 17 November 2006 | BlogPhotosFromVik-filled penguin.jpg (file) |  |
48 KB | Filled-in penguin for LCA 2007 | 1 |
| 06:28, 2 October 2006 | VerticalPlatform-spider 2 of.stl (file) | |
731 KB | Slotted version of spider. Make 2. | 1 |
| 18:48, 12 September 2006 | BlogPhotosFromVik-logo fom vienna.jpg (file) |  |
71 KB | Low res image oflogo from Vienna | 1 |
| 18:07, 12 September 2006 | VikOlliver-dsc02551.jpg (file) |  |
801 KB | RepRap Logo in Vienna (full size) | 1 |
| 22:34, 17 August 2006 | BlogPhotosFromVik-unadulterated first part.jpg (file) |  |
51 KB | Picture of first printed part with sprue etc. intact. | 1 |
| 22:32, 17 August 2006 | BlogPhotosFromVik-first part freshly printed.jpg (file) |  |
41 KB | The first RepRap part, just cooled. | 1 |
| 08:00, 13 August 2006 | BlogPhotosFromVik-polymorph holding mk2 extruder sml.jpg (file) |  |
85 KB | Polymorph freehand moulding holding Mk2 extruder in place. | 1 |
| 05:49, 13 August 2006 | BlogPhotosFromVik-second reprap showing wiring.jpg (file) |  |
147 KB | Second NZ RepRap under construction showing wiring. | 1 |
| 11:46, 12 August 2006 | BlogPhotosFromVik-stowable reprap in progress.jpg (file) |  |
91 KB | Stowable version of RepRap under construction. | 1 |
| 13:38, 20 July 2006 | BlogPhotosFromVik-first attempt at pyramid sml.jpg (file) |  |
47 KB | First attempt at depositing a flat-tipped pyramid | 1 |
| 00:04, 19 July 2006 | ShowCase-rr1 header.jpg (file) |  |
38 KB | Scaled version of header for quick loading. | 1 |
| 11:33, 17 July 2006 | BlogPhotosFromVik-polo with sprue removed sml.jpg (file) |  |
51 KB | Annular shape with sprue removed | 1 |
| 10:36, 16 July 2006 | InterchangeableNozzleMk2-nozzle on half finished extruder.jpg (file) |  |
24 KB | Nozzle fitted to a half-finished extruder barrel. | 1 |
| 10:35, 16 July 2006 | InterchangeableNozzleMk2-bud shaped dremel bit.jpg (file) |  |
12 KB | Dremel bit used to shape interior of nozzle | 1 |
| 10:34, 16 July 2006 | InterchangeableNozzleMk2-final nozzle sanded.jpg (file) |  |
19 KB | 0.5mm Nozzle after shaping and sanding | 1 |
| 10:32, 16 July 2006 | InterchangeableNozzleMk2-crudel shaped nozzle.jpg (file) |  |
29 KB | Crudely shaped 0.5mm nozzle | 1 |
| 10:31, 16 July 2006 | InterchangeableNozzleMk2-nozzle after thread removal.jpg (file) |  |
20 KB | Nozzle in progress. Excess thread removed. | 1 |
| 10:30, 16 July 2006 | InterchangeableNozzleMk2-cut bolt in nut soldered.jpg (file) |  |
26 KB | Cut and drilled bolt soldered into place. | 1 |
| 10:29, 16 July 2006 | InterchangeableNozzleMk2-cut bolt innut unsoldered.jpg (file) |  |
23 KB | Drilled and cut bolt in M6 nut showing exit hole | 1 |
| 09:37, 16 July 2006 | InterchangeableNozzleMk2-M6 bolt with 3mm hole.jpg (file) |  |
23 KB | 3mm hole drilled in M6 bolt. | 1 |
| 09:36, 16 July 2006 | InterchangeableNozzleMk2-M6 bolt centred.jpg (file) |  |
30 KB | M6 Bolt with a pilot hole in the centre | 1 |
| 10:29, 9 July 2006 | BlogPhotosFromVik-first 6mm gripley sml.jpg (file) |  |
66 KB | First 6mm linkage (%_Q_%gripley%_Q_%) printed by RepRap. | 1 |
| 07:16, 5 July 2006 | BlogPhotosFromVik-deposition on 240 grit sml.jpg (file) |  |
40 KB | Deposition made at 95C on P240 sandpaper | 1 |
| 12:07, 27 June 2006 | BlogPhotosFromVik-cooled hex vs uncooled.jpg (file) |  |
36 KB | A cooled test hexagon (right) vs uncooled. | 1 |
| 14:13, 22 June 2006 | BlogPhotosFromVik-break in mk2 extruder clamp sml.jpg (file) |  |
42 KB | 16mm clamp breakage on original Mk2 design | 1 |
| 15:49, 16 June 2006 | BlogPhotosFromVik-defected test hex from above.jpg (file) |  |
49 KB | The test hex, made using Adrians code, shown from above. | 1 |
| 15:25, 16 June 2006 | BlogPhotosFromVik-defect in test hex.jpg (file) |  |
53 KB | Shot of defect in 20mm hexagonal print test. | 1 |
| 01:15, 12 June 2006 | BlogPhotosFromVik-first 5mm complete product.jpg (file) |  |
59 KB | This is the first complete 5mm sample %_Q_%Produced%_Q_%, and its attendant Tower of Ooze | 1 |
| 12:54, 10 June 2006 | BlogPhotosFromVik-extrusion of hexagon 2nd layer closeup.jpg (file) |  |
39 KB | mov02395.mpg 2nd layer close-up of head | 1 |
| 10:25, 10 June 2006 | BlogPhotosFromVik-small shot of hexagon.jpg (file) |  |
10 KB | Small shot of hexagon deposited in mov02395.mpg | 1 |
| 09:42, 10 June 2006 | BlogPhotosFromVik-deposition on glass.jpg (file) |  |
15 KB | Still from mov02395.mpg | 1 |
| 09:36, 10 June 2006 | BlogPhotosFromVik-mov02395.mpg (file) | |
2.75 MB | MPEG of deposition using 0.8mm nozzle @ 140C with 1.1mm x 0.8mm layers | 1 |
| 14:15, 8 June 2006 | RPOrders-drive-coupling.stl (file) | |
48 KB | Mk 2 Extruder drive coupling | 1 |
