File list
This special page shows all uploaded files.
Date | Name | Thumbnail | Size | Description | Versions |
---|---|---|---|---|---|
04:58, 2 September 2016 | Duet wiring.zip (file) | 72 KB | Update , new drawings, replacement of photos by drawing, overall size divided by 10. | 2 | |
12:23, 17 August 2016 | Spool support vertical axis.jpg (file) | 529 KB | A spool support with vertical axis for space constrained installation. Use adaptation rings for different diameters All printed part. see https://github.com/PRouzeau/3D-printer-spool-on-top Own work licence GFDL1.2 and CC BY-SA 3.0 | 1 | |
11:47, 12 July 2016 | IMG 4973 Lars Kuur.JPG (file) | 265 KB | Fire on a 3D printer. Owner analysis is that the unsecured wire harness caused the heating cartridge to dislodge from hotend. The software did not checked the temperature rise against the input power, only had a timeout on temperature and did not detec... | 1 | |
11:45, 12 July 2016 | IMG 4970 Lars Kuur.JPG (file) | 382 KB | Fire on a 3D printer. Owner analysis is that the unsecured wire harness caused the heating cartridge to dislodge from hotend. The software did not checked the temperature rise against the input power, only had a timeout on temperature and did not detec... | 1 | |
18:56, 30 June 2016 | RRF Functional.png (file) | 112 KB | RepRap Firmware functional schematics for boards Duet 0.6 and 0.8.5 Licence GFDL 1.2 and CC BY-SA 3.0 | 1 | |
17:33, 30 June 2016 | RRF connection Duet WiFi.png (file) | 179 KB | RepRap Firmware Functional schematic on Duet WiFi board Licence GFDL1.2 / CC BY-SA 3.0 | 1 | |
05:21, 30 June 2016 | RRF SD Card files.png (file) | 5 KB | RepRap Firmware SD card files for Duet 0.6 and Duet 0.8.5 Licence GFDL 1.2 & CC BY-SA 3.0 | 1 | |
05:12, 30 June 2016 | Sd card files.png (file) | 5 KB | RRF_SD_card_files Licence GFDL1.2 & CC BY-SA 3.0 | 1 | |
09:52, 9 June 2016 | RRF connection2.png (file) | 100 KB | Missing image on mobile phone | 5 | |
16:29, 27 May 2016 | Two stepper wired in series.jpg (file) | 131 KB | Crop problem | 2 | |
23:00, 22 May 2016 | RRF functional.jpg (file) | 149 KB | Missing text | 4 | |
11:50, 22 May 2016 | Duet Thermistor.jpg (file) | 37 KB | Schematic of thermistor connection on board own work licence GFDL 1.2 and CC BY-SA 4.0 | 1 | |
10:59, 22 May 2016 | RRF connection1.png (file) | 74 KB | Better look | 2 | |
09:28, 22 May 2016 | RRF connection3.jpg (file) | 133 KB | Improved look | 5 | |
22:58, 18 May 2016 | Delta geometry3.png (file) | 62 KB | Mirrored as more representative | 3 | |
18:39, 18 May 2016 | Delta conventions.jpg (file) | 116 KB | Delta columns and axis names own work - licence GFDL 1.2 and CC BY-SA 4.0 | 1 | |
18:16, 18 May 2016 | Delta reachable area.png (file) | 167 KB | Mirrored - more representative of front opening in top view other mods | 3 | |
15:16, 16 May 2016 | Duet buzzer.jpg (file) | 147 KB | Connexion of a Buzzer on pin 32 of expansion connector on Duet 0.6 or Duet 0.8.5. Activation with M42 P67 S1 - deactivation M42 P67 S0 With buzzer SFM-27 current in 3.3v is < 10mA Licence GFDL 1.2 and CC BY-SA | 1 | |
18:11, 12 May 2016 | Servo brushless motor control.jpg (file) | 85 KB | Schematic of closed loop servo control with brushless motor | 1 | |
18:10, 12 May 2016 | Servo brushed motor control.jpg (file) | 82 KB | Schematic of closed loop servo control with brushed DC motor | 1 | |
18:09, 12 May 2016 | Hybrid stepper control.jpg (file) | 75 KB | Schematic of 'HYbrid' (with feedback) stepper control | 1 | |
18:08, 12 May 2016 | Simple stepper control.jpg (file) | 69 KB | Schematic of open loop stepper control | 1 | |
15:37, 5 May 2016 | Duet board 0.8.5 thermistor schematic.jpg (file) | 269 KB | More compact layout | 4 | |
08:41, 5 May 2016 | Duet board endstop schematic.jpg (file) | 35 KB | Duet board internal schematic for endstops (from v0.6 schematic) | 1 | |
18:43, 3 May 2016 | Duet ADC calibration.jpg (file) | 111 KB | Replacing thermistor by fixed value resistor of 220 Ohm for Board ADC calibration. Shall be done for each thermistor connection. | 1 | |
10:16, 3 May 2016 | Duet 0.8.5 wiring.jpg (file) | 469 KB | Added text and warnings | 2 | |
09:08, 2 May 2016 | Duet 0.6 wiring3.jpg (file) | 316 KB | Wiring for Duet 0.6 5V controlled fan Own work, photo by T3P3 (from RepRap wiki) Licence GFDL1.2 & CC BY-SA | 1 | |
09:07, 2 May 2016 | Duet 0.6 wiring.jpg (file) | 432 KB | Wiring for Duet 0.6 Main schematic Own work, photo by T3P3 (from RepRap wiki) Licence GFDL1.2 & CC BY-SA | 1 | |
16:01, 30 April 2016 | Duet 0.8.5 wiring2.jpg (file) | 516 KB | Separate 5V controlled fan in another schematic . Remains only SSR wiring | 3 | |
15:59, 30 April 2016 | Duet 0.8.5 wiring3.jpg (file) | 188 KB | Duet 0.8.5 wiring - controlled fan in 5V - | 1 | |
15:44, 28 April 2016 | Duet 0.8.5 wiring source.zip (file) | 558 KB | update with other schematic | 2 | |
11:09, 28 April 2016 | Lug terminals.jpg (file) | 27 KB | Lug terminals, photo from Wikimedia [https://commons.wikimedia.org/wiki/File:Kabelschuh_verschiedene_commons.jpg] | 1 | |
10:59, 28 April 2016 | Lug and ferrules terminals.jpg (file) | 1.22 MB | Lug and ferrule terminals. Photo from Wikimedia here : [https://commons.wikimedia.org/wiki/File:%D0%9D%D0%B0%D0%BA%D0%BE%D0%BD%D0%B5%D1%87%D0%BD%D0%B8%D0%BA%D0%B8_%D0%BD%D0%B0_%D1%80%D0%B0%D0%B7%D0%B4%D0%B5%D0%BB%D1%8B%D0%B2%D0%B0%D0%B5%D0%BC%D1%83%D1%... | 1 | |
10:32, 24 April 2016 | RRF connection.zip (file) | 28 KB | add multiple printer operation | 2 | |
20:55, 15 April 2016 | Spools on spigots.jpg (file) | 111 KB | 1kg Spools of 155mm (top) and 200 mm (bottom) on Spigots own work | 1 | |
20:53, 15 April 2016 | Spool 155mm.jpg (file) | 83 KB | 1 | ||
20:52, 15 April 2016 | Spool 200mm.jpg (file) | 98 KB | 1 | ||
16:35, 13 April 2016 | Active carbon filtering.jpg (file) | 96 KB | Filtering with activated carbon mattress as used in kitchen extractor | 1 | |
06:27, 13 April 2016 | Extracting filtration.png (file) | 102 KB | Schematic of filtration while extracting in ambiance licence: GFDL 1.2 - CC BY-SA Source file (Libre office draw): http://reprap.org/wiki/File:Filtration_principle_source.zip | 1 | |
06:25, 13 April 2016 | Recycling filtration.png (file) | 96 KB | Schematic of filtration while recycling licence: GFDL1.2 - CC BY-SA Source file (Libre office draw): http://reprap.org/wiki/File:Filtration_principle_source.zip#file | 1 | |
06:22, 13 April 2016 | Filtration principle source.zip (file) | 16 KB | Source file (libre office draw) for the filtration principle schematics | 1 | |
13:23, 7 April 2016 | DWC header color example.png (file) | 110 KB | Example for css modification to change panel header colors for printer recognition Here color is #e6f8e0 | 1 | |
12:32, 6 April 2016 | RRF IPcam view.JPG (file) | 100 KB | RepRap Firmware - Duet Web Control IP Camera view: Author : Ormerod187 See http://forums.reprap.org/read.php?416,648991 | 1 | |
12:32, 6 April 2016 | RRF IPCam settings.JPG (file) | 38 KB | RepRap Firmware - Duet Web Control IP Camera configuration : Author : Ormerod187 See http://forums.reprap.org/read.php?416,648991 | 1 | |
12:54, 2 April 2016 | Convert crepes.zip (file) | 16 KB | Small Libre office calc sheet. It converts G-codes according a given step/mm ratio of the first 8 notes of the children song 'Quand on fait des crêpes'. Use as a diagnostic/startup info for 'screenless' printers. | 1 | |
11:52, 14 March 2016 | SpeedUpChart.png (file) | 9 KB | Carriage speedup for arm angle - Author Hercek | 1 | |
15:27, 13 March 2016 | Duet 0.8.5 buttons.jpg (file) | 146 KB | Duet 0.8.5 Reset and erase buttons License GFDL and CC BY-SA 2.0 | 1 | |
15:25, 13 March 2016 | Duet 0.6 buttons.jpg (file) | 77 KB | Duet 0.6 reset and erase buttons License GFDL and CC By-SA 2.0 | 1 | |
17:45, 12 March 2016 | DWC Settings.png (file) | 272 KB | Duet Web Control tab 'Settings' | 1 | |
17:43, 12 March 2016 | DWC G-code Files.png (file) | 214 KB | Duet Web Control tab 'G-code files' | 1 |