File list
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 05:12, 30 June 2016 | Sd card files.png (file) |  |
5 KB | RRF_SD_card_files Licence GFDL1.2 & CC BY-SA 3.0 | 1 |
| 05:21, 30 June 2016 | RRF SD Card files.png (file) |  |
5 KB | RepRap Firmware SD card files for Duet 0.6 and Duet 0.8.5 Licence GFDL 1.2 & CC BY-SA 3.0 | 1 |
| 11:52, 14 March 2016 | SpeedUpChart.png (file) |  |
9 KB | Carriage speedup for arm angle - Author Hercek | 1 |
| 06:22, 13 April 2016 | Filtration principle source.zip (file) |  |
16 KB | Source file (libre office draw) for the filtration principle schematics | 1 |
| 12:54, 2 April 2016 | Convert crepes.zip (file) | |
16 KB | Small Libre office calc sheet. It converts G-codes according a given step/mm ratio of the first 8 notes of the children song 'Quand on fait des crêpes'. Use as a diagnostic/startup info for 'screenless' printers. | 1 |
| 09:37, 21 January 2016 | Delta geometry2.png (file) |  |
19 KB | drawing complements | 2 |
| 21:32, 26 January 2016 | Effector virtual rotation center.png (file) |  |
27 KB | Show the convergence point of arms supporting an effector, which is its virtual articulation. own work licence GFDL 1.2 & CC BY-SA | 1 |
| 11:09, 28 April 2016 | Lug terminals.jpg (file) |  |
27 KB | Lug terminals, photo from Wikimedia [https://commons.wikimedia.org/wiki/File:Kabelschuh_verschiedene_commons.jpg] | 1 |
| 10:32, 24 April 2016 | RRF connection.zip (file) | |
28 KB | add multiple printer operation | 2 |
| 08:41, 5 May 2016 | Duet board endstop schematic.jpg (file) |  |
35 KB | Duet board internal schematic for endstops (from v0.6 schematic) | 1 |
| 19:37, 1 January 2016 | Ferrule crimp.jpg (file) |  |
37 KB | Better image - Appropriate size of the terminal for the wire gauge Licences CC BY-SA - GFDL 1.2&1.3 | 2 |
| 11:50, 22 May 2016 | Duet Thermistor.jpg (file) |  |
37 KB | Schematic of thermistor connection on board own work licence GFDL 1.2 and CC BY-SA 4.0 | 1 |
| 12:32, 6 April 2016 | RRF IPCam settings.JPG (file) |  |
38 KB | RepRap Firmware - Duet Web Control IP Camera configuration : Author : Ormerod187 See http://forums.reprap.org/read.php?416,648991 | 1 |
| 19:31, 1 January 2016 | Wire stripper1.jpg (file) |  |
44 KB | Smaller size (L 1024 instead of 1280) to see thumbnail | 3 |
| 09:36, 21 January 2016 | Delta geometry1.png (file) |  |
46 KB | Drawing complements | 2 |
| 09:42, 21 January 2016 | OpenScad delta simulator.png (file) |  |
48 KB | OpenScad delta simulator view : https://github.com/PRouzeau/OpenSCAD-Delta-Simulator | 1 |
| 16:57, 26 December 2015 | Dupont Crimping.jpeg (file) |  |
53 KB | Size reduced to 1024 as not shown in 1280 | 2 |
| 22:58, 18 May 2016 | Delta geometry3.png (file) |  |
62 KB | Mirrored as more representative | 3 |
| 14:18, 11 January 2016 | Panel burned by inflated silicon pad.jpg (file) |  |
68 KB | During heat chamber tests, due to overheating the silicon pad glued on aluminium sheet (installed vertically along wood panel) inflated, closing the 10mm air gap and started a fire on the wood panel. | 1 |
| 18:08, 12 May 2016 | Simple stepper control.jpg (file) |  |
69 KB | Schematic of open loop stepper control | 1 |
| 04:58, 2 September 2016 | Duet wiring.zip (file) | |
72 KB | Update , new drawings, replacement of photos by drawing, overall size divided by 10. | 2 |
| 10:59, 22 May 2016 | RRF connection1.png (file) |  |
74 KB | Better look | 2 |
| 18:09, 12 May 2016 | Hybrid stepper control.jpg (file) |  |
75 KB | Schematic of 'HYbrid' (with feedback) stepper control | 1 |
| 15:25, 13 March 2016 | Duet 0.6 buttons.jpg (file) |  |
77 KB | Duet 0.6 reset and erase buttons License GFDL and CC By-SA 2.0 | 1 |
| 19:33, 1 January 2016 | Eye crimping2.jpg (file) |  |
80 KB | Insulated eye terminal crimping Notice the color of the terminal inaccordance with tool inlet Licences : CC BY-SA - GFDL 2 & 3 | 1 |
| 21:30, 26 January 2016 | Effector geometry.png (file) |  |
81 KB | Relations between the dimensions of an effector Own work licence GFDL 1.2 & CC BY-SA | 1 |
| 18:10, 12 May 2016 | Servo brushed motor control.jpg (file) |  |
82 KB | Schematic of closed loop servo control with brushed DC motor | 1 |
| 20:53, 15 April 2016 | Spool 155mm.jpg (file) |  |
83 KB | 1 | |
| 18:11, 12 May 2016 | Servo brushless motor control.jpg (file) |  |
85 KB | Schematic of closed loop servo control with brushless motor | 1 |
| 16:25, 26 December 2015 | Ferrule connect.jpg (file) |  |
86 KB | Size reduced to 1024 as don't show | 3 |
| 19:40, 1 January 2016 | Ferrule crimping.jpg (file) |  |
87 KB | View plier marks - Appropriate size for example crimp terminal Licences: CC BY-SA - GFDL 1.2 & 1.3 | 3 |
| 06:25, 13 April 2016 | Recycling filtration.png (file) |  |
96 KB | Schematic of filtration while recycling licence: GFDL1.2 - CC BY-SA Source file (Libre office draw): http://reprap.org/wiki/File:Filtration_principle_source.zip#file | 1 |
| 16:35, 13 April 2016 | Active carbon filtering.jpg (file) |  |
96 KB | Filtering with activated carbon mattress as used in kitchen extractor | 1 |
| 20:52, 15 April 2016 | Spool 200mm.jpg (file) |  |
98 KB | 1 | |
| 16:26, 26 December 2015 | Insulated connect.jpg (file) |  |
99 KB | Insulated connections Licence GFDL 1.2 & 1.3; CC BY-SA own work | 1 |
| 09:52, 9 June 2016 | RRF connection2.png (file) |  |
100 KB | Missing image on mobile phone | 5 |
| 12:32, 6 April 2016 | RRF IPcam view.JPG (file) |  |
100 KB | RepRap Firmware - Duet Web Control IP Camera view: Author : Ormerod187 See http://forums.reprap.org/read.php?416,648991 | 1 |
| 16:28, 26 December 2015 | Insulated Crimping1024.jpg (file) |  |
101 KB | Insulated crimping with simple and ratchet tool Licence GFDL 1.2 & 1.3; CC BY-SA own work | 1 |
| 06:27, 13 April 2016 | Extracting filtration.png (file) |  |
102 KB | Schematic of filtration while extracting in ambiance licence: GFDL 1.2 - CC BY-SA Source file (Libre office draw): http://reprap.org/wiki/File:Filtration_principle_source.zip | 1 |
| 08:20, 27 December 2015 | Mains connect.jpg (file) |  |
103 KB | Photo on other angle, showing that SSR are raised and well cooled. Better view and better light | 2 |
| 13:23, 7 April 2016 | DWC header color example.png (file) |  |
110 KB | Example for css modification to change panel header colors for printer recognition Here color is #e6f8e0 | 1 |
| 20:55, 15 April 2016 | Spools on spigots.jpg (file) |  |
111 KB | 1kg Spools of 155mm (top) and 200 mm (bottom) on Spigots own work | 1 |
| 18:43, 3 May 2016 | Duet ADC calibration.jpg (file) |  |
111 KB | Replacing thermistor by fixed value resistor of 220 Ohm for Board ADC calibration. Shall be done for each thermistor connection. | 1 |
| 18:56, 30 June 2016 | RRF Functional.png (file) |  |
112 KB | RepRap Firmware functional schematics for boards Duet 0.6 and 0.8.5 Licence GFDL 1.2 and CC BY-SA 3.0 | 1 |
| 18:39, 18 May 2016 | Delta conventions.jpg (file) |  |
116 KB | Delta columns and axis names own work - licence GFDL 1.2 and CC BY-SA 4.0 | 1 |
| 14:17, 11 January 2016 | Inflated silicon pad.jpg (file) |  |
123 KB | During heat chamber tests, due to overheating the pad glued on aluminium sheet (installed vertically along wood panel) inflated, closing the 10mm air gap and started a fire on the wood panel. | 1 |
| 19:30, 23 January 2016 | CoreXY principle.png (file) |  |
130 KB | CoreXY mechanism, extracted from the Halenia simulation here : https://github.com/PRouzeau/Halenia-CoreXY-printer/ Licences cc BY-SA & GFDL 1.2 | 1 |
| 16:29, 27 May 2016 | Two stepper wired in series.jpg (file) |  |
131 KB | Crop problem | 2 |
| 09:28, 22 May 2016 | RRF connection3.jpg (file) |  |
133 KB | Improved look | 5 |
| 15:27, 13 March 2016 | Duet 0.8.5 buttons.jpg (file) |  |
146 KB | Duet 0.8.5 Reset and erase buttons License GFDL and CC BY-SA 2.0 | 1 |
