All public logs
Combined display of all available logs of RepRap. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
(newest | oldest) View (newer 250 | older 250) (20 | 50 | 100 | 250 | 500)- 13:40, 18 July 2010 MattMoses (talk | contribs) uploaded File:TrigearsExample4.png (example output of MATLAB gear center distance program )
- 13:00, 18 July 2010 MattMoses (talk | contribs) uploaded File:AngleDefinitions.png (Diagram of gear angles to accompany page on simultaneous gear meshing)
- 12:48, 18 July 2010 MattMoses (talk | contribs) uploaded File:Multigear.zip (This is MATLAB code that calculates center locations for two gears that are in simultaneous mesh with a third gear and a straight rack.)
- 12:46, 18 July 2010 MattMoses (talk | contribs) uploaded File:Motor.jpg (motor assembly with gears simultaneously meshing with rack)
- 16:17, 12 June 2010 MattMoses (talk | contribs) uploaded File:ElasticCurve.png
- 16:37, 7 June 2010 MattMoses (talk | contribs) uploaded a new version of File:BendingExample.PNG (added expression for maximum deflection)
- 01:17, 31 May 2010 MattMoses (talk | contribs) uploaded File:CompliantMechanismSheetmetal.zip (Compliant mechanism 2D sheet metal pattern in svg, pdf, and dxf formats (all generated with InkScape) )
- 00:50, 31 May 2010 MattMoses (talk | contribs) uploaded File:EtchScriber12.jpg
- 00:49, 31 May 2010 MattMoses (talk | contribs) uploaded a new version of File:EtchScriber10.jpg
- 00:38, 31 May 2010 MattMoses (talk | contribs) uploaded File:EtchScriber11.jpg
- 00:37, 31 May 2010 MattMoses (talk | contribs) uploaded File:EtchScriber10.jpg
- 00:37, 31 May 2010 MattMoses (talk | contribs) uploaded File:EtchScriber9.jpg
- 00:36, 31 May 2010 MattMoses (talk | contribs) uploaded File:EtchScriber8.jpg
- 00:36, 31 May 2010 MattMoses (talk | contribs) uploaded File:EtchScriber7.jpg
- 00:36, 31 May 2010 MattMoses (talk | contribs) uploaded File:EtchScriber6.jpg
- 00:35, 31 May 2010 MattMoses (talk | contribs) uploaded File:EtchScriber5.jpg
- 00:35, 31 May 2010 MattMoses (talk | contribs) uploaded File:EtchScriber4.jpg
- 00:34, 31 May 2010 MattMoses (talk | contribs) uploaded File:EtchScriber3.jpg
- 00:34, 31 May 2010 MattMoses (talk | contribs) uploaded File:EtchScriber2b.jpg
- 00:33, 31 May 2010 MattMoses (talk | contribs) uploaded File:EtchScriber2a.jpg
- 00:33, 31 May 2010 MattMoses (talk | contribs) uploaded File:EtchScriber2.jpg
- 00:32, 31 May 2010 MattMoses (talk | contribs) uploaded File:EtchScriber1.jpg
- 02:16, 25 May 2010 MattMoses (talk | contribs) uploaded File:CompliantMechanismFiles.zip (pdf, dwg, and openSCAD for prototype compliant linear mechanism)
- 01:16, 25 May 2010 MattMoses (talk | contribs) uploaded File:ComLinMech12.jpg (Compliant mechanism - end view.)
- 01:14, 25 May 2010 MattMoses (talk | contribs) uploaded File:ComLinMech11.jpg (Self-supporting without leadscrew.)
- 01:13, 25 May 2010 MattMoses (talk | contribs) uploaded File:ComLinMech10.jpg (Compliant motion mechanism - disassembled.)
- 01:13, 25 May 2010 MattMoses (talk | contribs) uploaded File:ComLinMech9.jpg (Motor view - compliant mechanism.)
- 01:12, 25 May 2010 MattMoses (talk | contribs) uploaded File:ComLinMech8.jpg (Cardboard prototype compliant linear motion mechanism.)
- 01:10, 25 May 2010 MattMoses (talk | contribs) uploaded File:ComLinMech7.jpg (Aluminum compliant motion mechanism.)
- 01:09, 25 May 2010 MattMoses (talk | contribs) uploaded File:ComLinMech6.jpg (Plastic compliant motion mechanism.)
- 01:09, 25 May 2010 MattMoses (talk | contribs) uploaded File:ComLinMech5.jpg (Plastic compliant linear motion mechanism.)
- 01:08, 25 May 2010 MattMoses (talk | contribs) uploaded File:ComLinMech4.jpg (Plastic compliant linear motion mechanism.)
- 01:08, 25 May 2010 MattMoses (talk | contribs) uploaded File:ComLinMech3.jpg (Plastic compliant linear motion mechanism, extended.)
- 01:06, 25 May 2010 MattMoses (talk | contribs) uploaded File:ComLinMech2.jpg (Building the cardboard version.)
- 01:05, 25 May 2010 MattMoses (talk | contribs) uploaded File:Link-cartoon2.PNG (Compressed, equilibrium, and extended cases of planar compliant mechanism.)
- 01:03, 25 May 2010 MattMoses (talk | contribs) uploaded File:BendingExample.PNG (Estimating compliant mechanism's flexural member stiffness using Euler-Bernoulli beam theory.)
- 00:40, 25 May 2010 MattMoses (talk | contribs) uploaded File:ComLinMech1.jpg (Three prototype compliant linear motion mechanisms)
- 01:51, 11 April 2010 MattMoses (talk | contribs) uploaded File:Waxuum10.jpg (Wax master, silicone mold, polyurethane part.)
- 01:50, 11 April 2010 MattMoses (talk | contribs) uploaded File:Waxuum13.jpg (The finished wax master. The part is just a little do-nothing brick - it is not really a functional item.)
- 01:49, 11 April 2010 MattMoses (talk | contribs) uploaded File:Waxuum12.jpg (Later in the machining process. Note more wax has been collected.)
- 01:49, 11 April 2010 MattMoses (talk | contribs) uploaded File:Waxuum11.jpg (Closeup of case at beginning of test. The wax inside is molten so the interior is visible. Near the top of the case interior, note the slanted cut in the drain tube, where the thinner vent tube passes out and outside. Molten wax exits from the slanted )
- 01:47, 11 April 2010 MattMoses (talk | contribs) uploaded File:Waxuum8.jpg (A view of the test setup. Of course, this tool is meant to be installed on an automatic XYZ table (like RepRap or MakerBot) but for a quick test it was installed on the little manual Sherline. The waxuum was simply clamped to the vertical stage of the m)
- 01:46, 11 April 2010 MattMoses (talk | contribs) uploaded File:Waxuum9.jpg (Closeup view of nested drain and vent tubes at the cutting tip.)
- 01:45, 11 April 2010 MattMoses (talk | contribs) uploaded File:Waxuum5.jpg (Push-to-connect fitting visible on back.)
- 01:43, 11 April 2010 MattMoses (talk | contribs) uploaded File:Waxuum6.jpg (Third attempt. This one worked well enough to test. Solidified wax forms a film on the inside of the case. This design uses a nested drain and vent. The cutting tip exits to the left in the picture. The vent exits to the right. An eight-ohm heater i)
- 01:42, 11 April 2010 MattMoses (talk | contribs) uploaded File:Waxuum3.jpg (Second attempt. Vent and drain tubes run in parallel, with a sort of notch at the tip to allow molten wax to be replaced with air from the vent, then moved up the drain tube into the case. Push-to-connect fitting (visible behind case) is used to connect)
- 01:40, 11 April 2010 MattMoses (talk | contribs) uploaded File:Waxuum1.jpg (First attempt. This is just a single-tube needle with a heater and thermistor. The air tube is stuck in place with caulk. The lid, heater, ports, etc are held in place with JB-weld. This design did not work at all because there was not sufficient heat)
- 16:54, 10 April 2010 MattMoses (talk | contribs) uploaded File:Waxuum case parts.zip (waxuum case parts)
- 16:53, 10 April 2010 MattMoses (talk | contribs) uploaded File:WaxVacuum3.jpg (wax vacuum image)
- 21:40, 2 April 2010 User account MattMoses (talk | contribs) was created