All public logs
Combined display of all available logs of RepRap. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
(newest | oldest) View (newer 100 | older 100) (20 | 50 | 100 | 250 | 500)- 04:58, 2 September 2016 PRZ (talk | contribs) uploaded a new version of File:Duet wiring.zip (Update , new drawings, replacement of photos by drawing, overall size divided by 10.)
- 12:23, 17 August 2016 PRZ (talk | contribs) uploaded File:Spool support vertical axis.jpg (A spool support with vertical axis for space constrained installation. Use adaptation rings for different diameters All printed part. see https://github.com/PRouzeau/3D-printer-spool-on-top Own work licence GFDL1.2 and CC BY-SA 3.0)
- 11:47, 12 July 2016 PRZ (talk | contribs) uploaded File:IMG 4973 Lars Kuur.JPG (Fire on a 3D printer. Owner analysis is that the unsecured wire harness caused the heating cartridge to dislodge from hotend. The software did not checked the temperature rise against the input power, only had a timeout on temperature and did not detec...)
- 11:45, 12 July 2016 PRZ (talk | contribs) uploaded File:IMG 4970 Lars Kuur.JPG (Fire on a 3D printer. Owner analysis is that the unsecured wire harness caused the heating cartridge to dislodge from hotend. The software did not checked the temperature rise against the input power, only had a timeout on temperature and did not detec...)
- 18:56, 30 June 2016 PRZ (talk | contribs) uploaded File:RRF Functional.png (RepRap Firmware functional schematics for boards Duet 0.6 and 0.8.5 Licence GFDL 1.2 and CC BY-SA 3.0)
- 17:33, 30 June 2016 PRZ (talk | contribs) uploaded File:RRF connection Duet WiFi.png (RepRap Firmware Functional schematic on Duet WiFi board Licence GFDL1.2 / CC BY-SA 3.0)
- 05:21, 30 June 2016 PRZ (talk | contribs) uploaded File:RRF SD Card files.png (RepRap Firmware SD card files for Duet 0.6 and Duet 0.8.5 Licence GFDL 1.2 & CC BY-SA 3.0)
- 05:12, 30 June 2016 PRZ (talk | contribs) uploaded File:Sd card files.png (RRF_SD_card_files Licence GFDL1.2 & CC BY-SA 3.0)
- 09:52, 9 June 2016 PRZ (talk | contribs) uploaded a new version of File:RRF connection2.png (Missing image on mobile phone)
- 09:36, 9 June 2016 PRZ (talk | contribs) uploaded a new version of File:RRF connection2.png (Add Duet WiFi)
- 16:29, 27 May 2016 PRZ (talk | contribs) uploaded a new version of File:Two stepper wired in series.jpg (Crop problem)
- 16:24, 27 May 2016 PRZ (talk | contribs) uploaded File:Two stepper wired in series.jpg (Two steppers wired in series to get identical rotation for both with full torque. Source file in File:Duet_wiring.zip)
- 23:00, 22 May 2016 PRZ (talk | contribs) uploaded a new version of File:RRF functional.jpg (Missing text)
- 15:03, 22 May 2016 PRZ (talk | contribs) uploaded a new version of File:RRF functional.jpg (Resize elements)
- 11:50, 22 May 2016 PRZ (talk | contribs) uploaded File:Duet Thermistor.jpg (Schematic of thermistor connection on board own work licence GFDL 1.2 and CC BY-SA 4.0)
- 11:05, 22 May 2016 PRZ (talk | contribs) uploaded a new version of File:RRF connection2.png (Reload following viewing problems in pages (only ?))
- 11:01, 22 May 2016 PRZ (talk | contribs) uploaded a new version of File:RRF connection2.png (Improved look)
- 10:59, 22 May 2016 PRZ (talk | contribs) uploaded a new version of File:RRF connection1.png (Better look)
- 09:28, 22 May 2016 PRZ (talk | contribs) uploaded a new version of File:RRF connection3.jpg (Improved look)
- 08:47, 22 May 2016 PRZ (talk | contribs) uploaded a new version of File:RRF functional.jpg (More discrete license indication - small mods)
- 08:33, 22 May 2016 PRZ (talk | contribs) uploaded File:RRF functional.jpg (RepRap Firmware functional operation (using web interface) Own work Licence GFDL 1.2 and CC BY-SA)
- 22:58, 18 May 2016 PRZ (talk | contribs) uploaded a new version of File:Delta geometry3.png (Mirrored as more representative)
- 18:39, 18 May 2016 PRZ (talk | contribs) uploaded File:Delta conventions.jpg (Delta columns and axis names own work - licence GFDL 1.2 and CC BY-SA 4.0)
- 18:16, 18 May 2016 PRZ (talk | contribs) uploaded a new version of File:Delta reachable area.png (Mirrored - more representative of front opening in top view other mods)
- 15:16, 16 May 2016 PRZ (talk | contribs) uploaded File:Duet buzzer.jpg (Connexion of a Buzzer on pin 32 of expansion connector on Duet 0.6 or Duet 0.8.5. Activation with M42 P67 S1 - deactivation M42 P67 S0 With buzzer SFM-27 current in 3.3v is < 10mA Licence GFDL 1.2 and CC BY-SA)
- 18:11, 12 May 2016 PRZ (talk | contribs) uploaded File:Servo brushless motor control.jpg (Schematic of closed loop servo control with brushless motor)
- 18:10, 12 May 2016 PRZ (talk | contribs) uploaded File:Servo brushed motor control.jpg (Schematic of closed loop servo control with brushed DC motor)
- 18:09, 12 May 2016 PRZ (talk | contribs) uploaded File:Hybrid stepper control.jpg (Schematic of 'HYbrid' (with feedback) stepper control)
- 18:08, 12 May 2016 PRZ (talk | contribs) uploaded File:Simple stepper control.jpg (Schematic of open loop stepper control)
- 15:37, 5 May 2016 PRZ (talk | contribs) uploaded a new version of File:Duet board 0.8.5 thermistor schematic.jpg (More compact layout)
- 08:57, 5 May 2016 PRZ (talk | contribs) uploaded a new version of File:Duet board 0.8.5 thermistor schematic.jpg (New layout - effectively)
- 08:54, 5 May 2016 PRZ (talk | contribs) uploaded a new version of File:Duet board 0.8.5 thermistor schematic.jpg (Different Layout (less width, taller))
- 08:42, 5 May 2016 PRZ (talk | contribs) uploaded File:Duet board 0.8.5 thermistor schematic.jpg (Duet board V0.8.5 internal schematics for thermistors)
- 08:41, 5 May 2016 PRZ (talk | contribs) uploaded File:Duet board endstop schematic.jpg (Duet board internal schematic for endstops (from v0.6 schematic))
- 18:43, 3 May 2016 PRZ (talk | contribs) uploaded File:Duet ADC calibration.jpg (Replacing thermistor by fixed value resistor of 220 Ohm for Board ADC calibration. Shall be done for each thermistor connection.)
- 10:16, 3 May 2016 PRZ (talk | contribs) uploaded a new version of File:Duet 0.8.5 wiring.jpg (Added text and warnings)
- 09:17, 2 May 2016 PRZ (talk | contribs) uploaded File:Duet wiring.zip (Source file for all Duet wiring schematics)
- 09:08, 2 May 2016 PRZ (talk | contribs) uploaded File:Duet 0.6 wiring3.jpg (Wiring for Duet 0.6 5V controlled fan Own work, photo by T3P3 (from RepRap wiki) Licence GFDL1.2 & CC BY-SA)
- 09:07, 2 May 2016 PRZ (talk | contribs) uploaded File:Duet 0.6 wiring.jpg (Wiring for Duet 0.6 Main schematic Own work, photo by T3P3 (from RepRap wiki) Licence GFDL1.2 & CC BY-SA)
- 16:01, 30 April 2016 PRZ (talk | contribs) uploaded a new version of File:Duet 0.8.5 wiring2.jpg (Separate 5V controlled fan in another schematic . Remains only SSR wiring)
- 15:59, 30 April 2016 PRZ (talk | contribs) uploaded File:Duet 0.8.5 wiring3.jpg (Duet 0.8.5 wiring - controlled fan in 5V -)
- 15:36, 30 April 2016 PRZ (talk | contribs) uploaded a new version of File:Duet 0.8.5 wiring2.jpg (Modified text for BED control - Now recommend to use PID control instead of bang-bang)
- 15:44, 28 April 2016 PRZ (talk | contribs) uploaded a new version of File:Duet 0.8.5 wiring source.zip (update with other schematic)
- 15:35, 28 April 2016 PRZ (talk | contribs) uploaded File:Duet 0.8.5 wiring2.jpg (Duet 0.8.5 wiring - special wiring - SSR - controlled fans in 5V)
- 13:01, 28 April 2016 PRZ (talk | contribs) uploaded File:Duet 0.8.5 wiring source.zip (Source file (Libre office Draw) for the Duet 0.8.5 wiring schematics.)
- 12:28, 28 April 2016 PRZ (talk | contribs) uploaded File:Duet 0.8.5 wiring.jpg (Duet 0.8.5 wiring own work)
- 11:09, 28 April 2016 PRZ (talk | contribs) uploaded File:Lug terminals.jpg (Lug terminals, photo from Wikimedia [https://commons.wikimedia.org/wiki/File:Kabelschuh_verschiedene_commons.jpg])
- 10:59, 28 April 2016 PRZ (talk | contribs) uploaded File:Lug and ferrules terminals.jpg (Lug and ferrule terminals. Photo from Wikimedia here : [https://commons.wikimedia.org/wiki/File:%D0%9D%D0%B0%D0%BA%D0%BE%D0%BD%D0%B5%D1%87%D0%BD%D0%B8%D0%BA%D0%B8_%D0%BD%D0%B0_%D1%80%D0%B0%D0%B7%D0%B4%D0%B5%D0%BB%D1%8B%D0%B2%D0%B0%D0%B5%D0%BC%D1%83%D1%...)
- 10:32, 24 April 2016 PRZ (talk | contribs) uploaded a new version of File:RRF connection.zip (add multiple printer operation)
- 10:20, 24 April 2016 PRZ (talk | contribs) uploaded a new version of File:RRF connection3.jpg (RepRap Firmware operating multiple printers. own work (Pierre ROUZEAU), licence GFDL 1.2 & CC BY-SA add colors on windows headers to distinguish printers)
- 10:09, 24 April 2016 PRZ (talk | contribs) uploaded a new version of File:RRF connection3.jpg (RepRap Firmware operating multiple printers. own work (Pierre ROUZEAU), licence GFDL 1.2 & CC BY-SA)
- 10:08, 24 April 2016 PRZ (talk | contribs) uploaded a new version of File:RRF connection3.jpg (RepRap Firmware operating multiple printers. own work (Pierre ROUZEAU), licence GFDL 1.2 & CC BY-SA)
- 10:07, 24 April 2016 PRZ (talk | contribs) uploaded File:RRF connection3.jpg (RepRap Firmware operating multiple printers. own work (Pierre ROUZEAU), licence GFDL 1.2 & CC BY-SA)
- 20:55, 15 April 2016 PRZ (talk | contribs) uploaded File:Spools on spigots.jpg (1kg Spools of 155mm (top) and 200 mm (bottom) on Spigots own work)
- 20:53, 15 April 2016 PRZ (talk | contribs) uploaded File:Spool 155mm.jpg
- 20:53, 15 April 2016 PRZ (talk | contribs) uploaded File:Spool 200mm.jpg
- 16:35, 13 April 2016 PRZ (talk | contribs) uploaded File:Active carbon filtering.jpg (Filtering with activated carbon mattress as used in kitchen extractor)
- 06:27, 13 April 2016 PRZ (talk | contribs) uploaded File:Extracting filtration.png (Schematic of filtration while extracting in ambiance licence: GFDL 1.2 - CC BY-SA Source file (Libre office draw): http://reprap.org/wiki/File:Filtration_principle_source.zip)
- 06:25, 13 April 2016 PRZ (talk | contribs) uploaded File:Recycling filtration.png (Schematic of filtration while recycling licence: GFDL1.2 - CC BY-SA Source file (Libre office draw): http://reprap.org/wiki/File:Filtration_principle_source.zip#file)
- 06:22, 13 April 2016 PRZ (talk | contribs) uploaded File:Filtration principle source.zip (Source file (libre office draw) for the filtration principle schematics)
- 15:35, 11 April 2016 PRZ (talk | contribs) uploaded File:RRF connection2.png (RepRap Firmware connection with Ethernet connection - option 2 Printer connected to a Wifi bridge and Wifi Camera Source file : http://reprap.org/mediawiki/images/7/7c/RRF_connection.zip Own work License GFDL 1.2 CC BY-SA)
- 15:34, 11 April 2016 PRZ (talk | contribs) uploaded File:RRF connection1.png (RepRap Firmware connection with Ethernet connection - option 1 Ethernet connection for Printer and Camera Source file : http://reprap.org/mediawiki/images/7/7c/RRF_connection.zip Own work License GFDL 1.2 CC BY-SA)
- 15:31, 11 April 2016 PRZ (talk | contribs) uploaded File:RRF connection.zip (RRF connection source files - not used directly in the wiki Format .odg (Libre office draw) own work licence GFDL 1.2 - CC BY-SA)
- 17:23, 9 April 2016 PRZ (talk | contribs) moved page Proposed RepRap Duet Status Responses to RepRap Firmware Status responses (It is firmware related, not specific to a board)
- 13:23, 7 April 2016 PRZ (talk | contribs) uploaded File:DWC header color example.png (Example for css modification to change panel header colors for printer recognition Here color is #e6f8e0)
- 12:32, 6 April 2016 PRZ (talk | contribs) uploaded File:RRF IPcam view.JPG (RepRap Firmware - Duet Web Control IP Camera view: Author : Ormerod187 See http://forums.reprap.org/read.php?416,648991)
- 12:32, 6 April 2016 PRZ (talk | contribs) uploaded File:RRF IPCam settings.JPG (RepRap Firmware - Duet Web Control IP Camera configuration : Author : Ormerod187 See http://forums.reprap.org/read.php?416,648991)
- 12:54, 2 April 2016 PRZ (talk | contribs) uploaded File:Convert crepes.zip (Small Libre office calc sheet. It converts G-codes according a given step/mm ratio of the first 8 notes of the children song 'Quand on fait des crêpes'. Use as a diagnostic/startup info for 'screenless' printers.)
- 11:52, 14 March 2016 PRZ (talk | contribs) uploaded File:SpeedUpChart.png (Carriage speedup for arm angle - Author Hercek)
- 20:56, 13 March 2016 PRZ (talk | contribs) moved page Editing Duet config.g file to Updating RepRap Firmware config.g file (This is related to the firmware, not to a specific board)
- 15:27, 13 March 2016 PRZ (talk | contribs) uploaded File:Duet 0.8.5 buttons.jpg (Duet 0.8.5 Reset and erase buttons License GFDL and CC BY-SA 2.0)
- 15:25, 13 March 2016 PRZ (talk | contribs) uploaded File:Duet 0.6 buttons.jpg (Duet 0.6 reset and erase buttons License GFDL and CC By-SA 2.0)
- 17:45, 12 March 2016 PRZ (talk | contribs) uploaded File:DWC Settings.png (Duet Web Control tab 'Settings')
- 17:43, 12 March 2016 PRZ (talk | contribs) uploaded File:DWC G-code Files.png (Duet Web Control tab 'G-code files')
- 17:42, 12 March 2016 PRZ (talk | contribs) uploaded File:DWC G-code Console.png (Duet web control tab 'G-code console')
- 17:41, 12 March 2016 PRZ (talk | contribs) uploaded File:DWC Print Status.png (Duet Web Control tab 'Print status', default tab while printing)
- 17:39, 12 March 2016 PRZ (talk | contribs) uploaded File:DWC Machine Control.png (Duet web control main tab 'Machine control')
- 00:04, 27 January 2016 PRZ (talk | contribs) uploaded a new version of File:Delta reachable area.png (Correction of wrong geometry)
- 23:22, 26 January 2016 PRZ (talk | contribs) uploaded File:Delta reachable area.png (What is the area that the effector of a Delta robot could reach, taking into account clearance with the columns. Own work Licence GFDL 1.2 & CC BY-SA 2.0)
- 21:32, 26 January 2016 PRZ (talk | contribs) uploaded File:Effector virtual rotation center.png (Show the convergence point of arms supporting an effector, which is its virtual articulation. own work licence GFDL 1.2 & CC BY-SA)
- 21:30, 26 January 2016 PRZ (talk | contribs) uploaded File:Effector geometry.png (Relations between the dimensions of an effector Own work licence GFDL 1.2 & CC BY-SA)
- 19:30, 23 January 2016 PRZ (talk | contribs) uploaded File:CoreXY principle.png (CoreXY mechanism, extracted from the Halenia simulation here : https://github.com/PRouzeau/Halenia-CoreXY-printer/ Licences cc BY-SA & GFDL 1.2)
- 09:42, 21 January 2016 PRZ (talk | contribs) uploaded File:OpenScad delta simulator.png (OpenScad delta simulator view : https://github.com/PRouzeau/OpenSCAD-Delta-Simulator)
- 09:40, 21 January 2016 PRZ (talk | contribs) uploaded File:DSim Graphic simulator.png (dSim graphic simulator web site view: https://tube.geogebra.org/m/1352047)
- 09:39, 21 January 2016 PRZ (talk | contribs) uploaded File:Deltabot calculator.png (Deltabot calculator: Web site view : http://www.thinkyhead.com/_delta/)
- 09:37, 21 January 2016 PRZ (talk | contribs) uploaded a new version of File:Delta geometry2.png (drawing complements)
- 09:36, 21 January 2016 PRZ (talk | contribs) uploaded a new version of File:Delta geometry1.png (Drawing complements)
- 09:07, 21 January 2016 PRZ (talk | contribs) uploaded a new version of File:Delta geometry3.png (Removed text)
- 08:44, 21 January 2016 PRZ (talk | contribs) uploaded File:Delta geometry3.png (Top view schematic of a linear delta, effector centered Licences : cc BY-SA 2.0 & GFDL 1.2)
- 08:42, 21 January 2016 PRZ (talk | contribs) uploaded File:Delta geometry2.png (Side view schematic of a linear delta, effector positioned sideway licences : cc BY-SA & GFDL 1.2)
- 08:41, 21 January 2016 PRZ (talk | contribs) uploaded File:Delta geometry1.png (Side view schamatic of a linear delta, effector centered Licence cc-BY-SA & GFDL 1.2)
- 12:34, 20 January 2016 PRZ (talk | contribs) moved page Hotmail technical support phone number 1-888-225-0141 hotmail tech support phone number 1-888-225-0141 brother printer tech support number 1-888-225-0141 brother printer customer support number 1-888-225-0141 brother printer technical support 1-8/fr to RepRap/fr over redirect (revert)
- 14:18, 11 January 2016 PRZ (talk | contribs) uploaded File:Panel burned by inflated silicon pad.jpg (During heat chamber tests, due to overheating the silicon pad glued on aluminium sheet (installed vertically along wood panel) inflated, closing the 10mm air gap and started a fire on the wood panel.)
- 14:17, 11 January 2016 PRZ (talk | contribs) uploaded File:Inflated silicon pad.jpg (During heat chamber tests, due to overheating the pad glued on aluminium sheet (installed vertically along wood panel) inflated, closing the 10mm air gap and started a fire on the wood panel.)
- 14:12, 11 January 2016 PRZ (talk | contribs) uploaded File:Antslake burnt board.jpg (From the Reprap forum, with authorization, a photo of a board which takes fire during an overnight printing. Hopefully, the fire self-extinguished. see http://forums.reprap.org/read.php?392,294850)
- 19:40, 1 January 2016 PRZ (talk | contribs) uploaded a new version of File:Ferrule crimping.jpg (View plier marks - Appropriate size for example crimp terminal Licences: CC BY-SA - GFDL 1.2 & 1.3)
- 19:37, 1 January 2016 PRZ (talk | contribs) uploaded a new version of File:Ferrule crimp.jpg (Better image - Appropriate size of the terminal for the wire gauge Licences CC BY-SA - GFDL 1.2&1.3)
- 19:33, 1 January 2016 PRZ (talk | contribs) uploaded File:Eye crimping2.jpg (Insulated eye terminal crimping Notice the color of the terminal inaccordance with tool inlet Licences : CC BY-SA - GFDL 2 & 3)
- 19:31, 1 January 2016 PRZ (talk | contribs) uploaded a new version of File:Wire stripper1.jpg (Smaller size (L 1024 instead of 1280) to see thumbnail)
- 19:31, 1 January 2016 PRZ (talk | contribs) uploaded a new version of File:Wire stripper1.jpg (Smaller size (L 1024 instead of 1280) to see thumbnail)