Upload log
Below is a list of the most recent file uploads. See the gallery of new files for a more visual overview.
(newest | oldest) View (newer 500 | older 500) (20 | 50 | 100 | 250 | 500)- 18:16, 4 April 2024 VikOlliver (talk | contribs) uploaded File:Mk2 experimental 20240401 141636 386.jpg (Second experimental platform for μRepRap using indirect lighting stage, robust probe arm, and feet with endstop switches.)
- 00:20, 1 April 2024 VikOlliver (talk | contribs) uploaded File:First square with M3 2024-04-01 14-07-00.jpg (Markings in Sharpie on a microscope slide etched with a 1.0mm square enclosing a 0.5mm square. Lower right shows fragment of M3 screw thread with 0.5mm pitch for scale.)
- 20:12, 12 March 2024 VikOlliver (talk | contribs) uploaded File:2024-03-13-084007 annotated.jpg (Annotated image showing deposition made with a 40μm hypodermic tip.)
- 03:29, 11 March 2024 VikOlliver (talk | contribs) uploaded File:URepRap logo.png (RepRap logo with a micron in the middle)
- 00:24, 7 March 2024 VikOlliver (talk | contribs) uploaded File:URepRap first test rig.jpg (Initial test rig using OpenFlexure Delta stage with a single functional stepper and a wire probe being observed through a microscope.)
- 23:51, 6 March 2024 VikOlliver (talk | contribs) uploaded File:Probe tip and hypodermic.png (Tip of a 24 gauge hypodermic needle (right) and an electrically etched probe top with a tip radius of approximately 0.25µm)
- 04:31, 23 February 2024 Simon.pilepich (talk | contribs) uploaded File:Ratrig.jpg
- 02:22, 23 February 2024 Simon.pilepich (talk | contribs) uploaded File:Voron.jpg (Voron 0.2)
- 17:45, 20 February 2024 Engineeringfeind (talk | contribs) uploaded File:Stage one complete.png
- 17:44, 20 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step 3 before.png
- 17:44, 20 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step 3 after.png
- 17:32, 20 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step 3 after image 2.png
- 17:32, 20 February 2024 Seumag (talk | contribs) uploaded File:Pld sap flanges.png (more up to date version of the design)
- 17:29, 20 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step 4b before.png
- 17:27, 20 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step 4a after.png
- 17:26, 20 February 2024 Engineeringfeind (talk | contribs) uploaded a new version of File:Step 2 after.png
- 17:24, 20 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step 2 after.png
- 14:39, 17 February 2024 Seumag (talk | contribs) uploaded File:Tape mech.jpg (tape mechanism with apertures)
- 14:38, 17 February 2024 Seumag (talk | contribs) uploaded File:Tape aperture cut.jpg (apertures being cut)
- 14:37, 17 February 2024 Seumag (talk | contribs) uploaded File:Tape aperture det.jpg (Details of aperture cut onto tape)
- 14:36, 17 February 2024 Seumag (talk | contribs) uploaded File:Tape apertures.jpg (example of apertures cut onto the tape)
- 11:10, 16 February 2024 Seumag (talk | contribs) uploaded File:Sap mechanism depo.png (PLD-SAP mechanism, during deposition)
- 11:09, 16 February 2024 Seumag (talk | contribs) uploaded File:Sap mechanism cut.png (PLD_SAP diagram, cutting masks)
- 11:00, 16 February 2024 Seumag (talk | contribs) uploaded File:Sap mechanism side.png (Diagram of main mechanism)
- 10:22, 16 February 2024 Seumag (talk | contribs) uploaded File:PLD Cale.png (CAD Design, full)
- 09:54, 16 February 2024 Seumag (talk | contribs) uploaded File:Aligner Scheme.png (Diagram explaining the alignment mechanism)
- 09:51, 16 February 2024 Seumag (talk | contribs) uploaded File:Inertial slider.jpg (Prototype for the tape adjusting mechanism)
- 09:48, 16 February 2024 Seumag (talk | contribs) uploaded File:Ajuste cinta.png (tape adjusting mechanism, cad)
- 09:18, 16 February 2024 Seumag (talk | contribs) uploaded File:Mask cut.png (mask aperture cutting)
- 09:18, 16 February 2024 Seumag (talk | contribs) uploaded File:Tape fab.png (mask's tape fabrication process)
- 09:16, 16 February 2024 Seumag (talk | contribs) uploaded File:Carrusel.png (Target carrousel design for the first implementation)
- 09:15, 16 February 2024 Seumag (talk | contribs) uploaded File:Mec cinta.png (tape driving mechanism for the first implementation)
- 09:14, 16 February 2024 Seumag (talk | contribs) uploaded File:PLD flange.jpg (overview of first implementation)
- 17:06, 15 February 2024 Seumag (talk | contribs) uploaded File:PLD standard in.jpg (View into the chamber)
- 17:03, 15 February 2024 Seumag (talk | contribs) uploaded File:Pld v0 setup.jpg (Standard configuration of the old PLD setup)
- 16:38, 15 February 2024 Seumag (talk | contribs) uploaded File:BCTG process.png (Naive fabrication process by MM-PLD)
- 16:37, 15 February 2024 Seumag (talk | contribs) uploaded File:BCTG.png (naive diagram of BCTG TFT)
- 16:35, 15 February 2024 Seumag (talk | contribs) uploaded File:Pld sap front.png (PLD-SAP CAD front view)
- 15:42, 15 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step 2 hotend dissasembly.png
- 01:39, 15 February 2024 Hammersamatom (talk | contribs) uploaded File:Klipper logo.png (Logo of the Klipper firmware project)
- 23:18, 14 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step two coupler dissasembly.png
- 23:16, 14 February 2024 Engineeringfeind (talk | contribs) uploaded File:Step two dissasembly.png
- 22:24, 14 February 2024 Engineeringfeind (talk | contribs) uploaded File:DCS00264.png
- 22:15, 14 February 2024 Engineeringfeind (talk | contribs) uploaded File:DCS00263.png (a before photo for Cu1 printer assembly instructions)
- 10:26, 30 June 2023 Dust (talk | contribs) uploaded a new version of File:Reprap fgdc smart adapter pinout.png (Update SD-CARD SPI/MOSI pin)
- 10:22, 30 June 2023 Dust (talk | contribs) uploaded a new version of File:Reprap fgdc smart adapter pinout.png (Update SD-CARD SPI/MOSI pin)
- 10:19, 30 June 2023 Dust (talk | contribs) uploaded a new version of File:Reprap fgdc smart adapter pinout.png (Update SD-CARD SPI/MOSI pin)
- 07:25, 25 June 2023 Adrianbowyer (talk | contribs) uploaded File:Science-museum.jpg
- 18:58, 13 May 2023 Ahmedibrahim (talk | contribs) uploaded File:Template Cairo30 3D Printer Image.jpg
- 18:57, 13 May 2023 Ahmedibrahim (talk | contribs) uploaded File:Cairo30 feature01.jpg
- 18:26, 13 May 2023 Ahmedibrahim (talk | contribs) uploaded File:Cairo30 3D Printer Front Image.jpg
- 18:22, 13 May 2023 Ahmedibrahim (talk | contribs) uploaded File:Cairo30 3D Printer Side Image new edited.jpg
- 05:24, 30 April 2023 Daniel Massicotte (talk | contribs) uploaded File:Dir.jpg (Easy to read Directory from printer SD Card seen on Repetier-Server with the command DIR.)
- 02:54, 27 April 2023 Alexbrowns (talk | contribs) uploaded File:A Lead Compound with Multiple Pharmacological Activities.jpeg (Zaprinast is a cGMP-specific phosphodiesterases (PDEs) inhibitor and the lead compound of sildenafil, a potent and selective PDE5 inhibitor and an active drug in the treatment of erectile dysfunction. PDEs hydrolyze the cyclic phosphate bond in cyclic...)
- 15:55, 27 March 2023 Mechadense (talk | contribs) uploaded a new version of File:ReChainConcept Screenshot 20220922 155651.png (Author: Lukas M. Süss aka Mechadense <br> Description: Conceptual sketch of a RepRec System <br> License: CC-BY-SA-4.0)
- 15:44, 27 March 2023 Mechadense (talk | contribs) uploaded File:ReChainConcept Screenshot 20220922 155651.png (Author: Lukas M. Süss aka Mechadense <br> Description: Conceptual sketch of a RepRec System <br> License: CC-BY-SA-4.0)
- 02:49, 24 March 2023 Alvon3DprinTor (talk | contribs) uploaded File:GA3Dproject 45degprinting.jpeg (GA3DProject 45deg infinite printing module just to add on the base machine)
- 12:56, 18 March 2023 Alvon3DprinTor (talk | contribs) uploaded File:GA3D Project Lugh.jpeg (A new species of reprap : The GA3D Lugh project... under CERN OHL-W v2 design slowly improved)
- 12:34, 18 March 2023 Alvon3DprinTor (talk | contribs) uploaded File:SmartGA3D unloadingloadinfilament B.jpeg (GA3D smart unloading/loading filament mechanism licensed under CERN OHL-W v2)
- 12:33, 18 March 2023 Alvon3DprinTor (talk | contribs) uploaded File:SmartGA3D unloadingloadinfilament A.jpeg (GA3D smart unloading/loading filament mechanism licensed under CERN OHL-W v2)
- 12:55, 9 March 2023 Mechadense (talk | contribs) uploaded File:MotorBackpackOptions.png ('''Author:''' Lukas M. Süss (aka mechadense) <br> '''License:''' CC0 <br> '''Description:''' <br> Avoiding moving motors relative to each other puts them all at the same spot in the kinematic chain as a "motor backpack" thereby causing different nece...)
- 08:04, 9 March 2023 Cyber (talk | contribs) uploaded a new version of File:Modificado.jpg
- 07:52, 9 March 2023 Cyber (talk | contribs) uploaded a new version of File:Modificado.jpg
- 08:33, 8 March 2023 Mechadense (talk | contribs) uploaded File:RepRec-Project-overview.png ('''Author:''' Lukas M. Süss (aka mechadense) <br> '''License:''' CC-BY-SA-4.0 <br> '''Date:''' 2022-11-23 <br> '''Description:''' tl;dr ~ possibly the briefest possible overview over the RepRec Project. <br> Using closest existing analogous work for...)
- 08:02, 8 March 2023 Mechadense (talk | contribs) uploaded File:ReMecComponentsInfos A4-170dpi.jpg ('''Author:''' Lukas M. Süss (aka mechadense) <br> '''License:''' CC-BY-SA-4.0 (see on image) '''Description:''' <br> Overview over various RepRec/ReChain system components that made it to the 3D-printing prototyping phase.)
- 07:25, 8 March 2023 Mechadense (talk | contribs) uploaded File:RepRec ViciousToVirtuousCycle Screenshot 20230308 122129.png (added the influence of part-size variation on vitamin count <br> Screenshot_20230308_122129)
- 06:49, 8 March 2023 Mechadense (talk | contribs) uploaded File:RepRec ViciousToVirtuousCycle Screenshot 20230308 114028.png ('''Author:''' Lukas M. Süss (aka mechadense) <br> '''License:''' CC-BY-SA-4.0 <br> '''Date:''' 2023-03-07 <br> '''Description:''' <br> How adding RepRec systems may turn <br> – a vicious cycle that leads to zenralized production into <br> – a vi...)
- 06:30, 8 March 2023 Mechadense (talk | contribs) uploaded File:RepRec HighlyConceptualSketch newer Screenshot 20230308 110119.png ('''Author:''' Lukas M. Süss (aka mechadense) <br> '''License:''' CC-BY-SA <br> '''Date:''' paper-sketch 2022-06; digitized & published 2023-03-08 '''Description:''' <br> Highly conceptual sketch of a RepRec-crawler hanging from one dimensional pair...)
- 23:20, 3 February 2023 MrotingMan (talk | contribs) uploaded File:43.jpg (The front portion of the Parabilis (ScribbleBot))
- 17:23, 3 February 2023 Ahmedibrahim (talk | contribs) uploaded File:Cairo30 3d-printer v55 back.jpg
- 17:23, 3 February 2023 Ahmedibrahim (talk | contribs) uploaded File:Cairo30 3d-printer v55 side.jpg
- 17:22, 3 February 2023 Ahmedibrahim (talk | contribs) uploaded File:Cairo30 3d-printer v55.jpg
- 17:17, 3 February 2023 Ahmedibrahim (talk | contribs) uploaded File:Cairo30 Machine Featured.jpg
- 01:54, 4 January 2023 SarahHuston (talk | contribs) uploaded File:Post 9 (1).jpg (Mate Mate natural energy drink is leading energy drink with wellmune and has natural caffeine and low sugar content to avoid harmful effects of energy drink and healthy for your everyday energy needs. This is the first energy drink with Wellmune which...)
- 16:41, 29 December 2022 Alvon3DprinTor (talk | contribs) uploaded File:GA3D M2.jpeg (Layout of the GA3D M2)
- 06:45, 22 November 2022 Danmas (talk | contribs) uploaded File:Druid Logo.png (Official Druid Firmware logo)
- 10:10, 24 September 2022 Alvon3DprinTor (talk | contribs) uploaded File:GA3Dtech45deg.jpeg (45° infinite printing module extension)
- 03:46, 10 September 2022 Gerasimenkoao (talk | contribs) uploaded File:05displayMount.jpg (Prusa i3 StarWars Edition display & RAMPS instaling)
- 03:44, 10 September 2022 Gerasimenkoao (talk | contribs) uploaded File:04ATXpowerSupply.jpg (Prusa i3 StarWars Edition ATX power supply&stiffening rib)
- 03:39, 10 September 2022 Gerasimenkoao (talk | contribs) uploaded File:03BlackMatt.jpg (Prusa i3 StarWars Edition after painting)
- 03:37, 10 September 2022 Gerasimenkoao (talk | contribs) uploaded File:02checkGeometry.jpg (Prusa i3 StarWars Edition assembly and geometry check)
- 03:36, 10 September 2022 Gerasimenkoao (talk | contribs) uploaded File:01laserCuttedPlywood6mm.jpg (Prusa i3 StarWars Edition lase-cutted plywood parts)
- 03:08, 10 September 2022 Gerasimenkoao (talk | contribs) uploaded File:00header1.jpg (Prusa i3 StarWars Edition ready)
- 03:05, 10 September 2022 Gerasimenkoao (talk | contribs) uploaded File:00header.jpg (Prusa i3 StarWars Edition)
- 03:13, 6 September 2022 Ctkjose (talk | contribs) uploaded File:3D Printer FDM common endstop wiring circa 2020.png
- 06:22, 20 August 2022 Alvon3DprinTor (talk | contribs) uploaded File:RollingThreadExtruder Concept GA3Dtech.jpeg (Rolling Thread Extruder Concept)
- 04:52, 11 August 2022 Alvon3DprinTor (talk | contribs) uploaded File:GA3DtechM1 45degmodule.png (GA3DtechM1 45deg module)
- 02:37, 24 June 2022 Bangalitantrik (talk | contribs) uploaded File:Bengali.png (Love relation problem solution can be of different types. These solutions are useful for people who are married, for people in love but they feel their love is not as they expected. https://www.bengalitantrik.com/love-relationship-problem-solution-beng...)
- 22:47, 17 June 2022 Felipe Dachshund (talk | contribs) uploaded a new version of File:Estrutura de componentes de uma RepRap.png (Minor changes (spelling))
- 17:28, 16 June 2022 Felipe Dachshund (talk | contribs) uploaded File:Conjunto de ferramentas RepRap.jpg (Guia do Conjunto de Ferramentas RepRap)
- 10:36, 16 June 2022 3D Robot (talk | contribs) uploaded File:Prototype0.png (This is one of the first prototypes. Notice that it only has one arm. All of the motions work and so does the connect. But it is not fully functional yet.)
- 10:22, 16 June 2022 3D Robot (talk | contribs) uploaded File:Completerobot.png (A rendering of the complete robot, details may very but the idea is the same.)
- 01:12, 15 June 2022 Ahmedibrahim (talk | contribs) uploaded File:Cairo mini closeup edited ag.jpg
- 01:11, 15 June 2022 Ahmedibrahim (talk | contribs) uploaded File:Cairo mini closeup edited2 ag.jpg
- 01:10, 15 June 2022 Ahmedibrahim (talk | contribs) uploaded File:Cairo mini main2 edited ag.jpg
- 01:08, 15 June 2022 Ahmedibrahim (talk | contribs) uploaded File:Cairo mini main edited ag.jpg
- 16:48, 7 June 2022 Felipe Dachshund (talk | contribs) uploaded File:Estrutura de componentes de uma RepRap.png (Estrutura dos componentes de uma impressora RepRap)
- 18:06, 20 May 2022 CherHubert (talk | contribs) uploaded File:SollarCell.png
- 18:02, 20 May 2022 CherHubert (talk | contribs) uploaded File:CarBattery.jpg
- 17:54, 20 May 2022 CherHubert (talk | contribs) uploaded File:DeltaFold Illustration002-FullHD.jpg
- 17:52, 20 May 2022 CherHubert (talk | contribs) uploaded File:DeltaFold IllustrationImpression 004-FullHD.jpg
- 17:46, 20 May 2022 CherHubert (talk | contribs) uploaded File:DeltaFold IllustrationImpression 003-FullHD.jpg
- 17:45, 20 May 2022 CherHubert (talk | contribs) uploaded File:DeltaFold IllustrationImpression 002-FullHD.jpg
- 17:44, 20 May 2022 CherHubert (talk | contribs) uploaded File:DeltaFold IllustrationImpression 001-FullHD.jpg
- 17:42, 20 May 2022 CherHubert (talk | contribs) uploaded File:DeltaFold Illustration 002-FullHD.jpg
- 17:42, 20 May 2022 CherHubert (talk | contribs) uploaded File:DeltaFold Illustration 001-FullHD.jpg
- 17:16, 20 May 2022 CherHubert (talk | contribs) uploaded File:HotEnd E3Dv6.JPG
- 17:10, 20 May 2022 CherHubert (talk | contribs) uploaded File:LesCables-FullHD.JPG
- 16:58, 20 May 2022 CherHubert (talk | contribs) uploaded File:BoitierElectroniqueOuvert DeltaFold.JPG
- 16:51, 20 May 2022 CherHubert (talk | contribs) uploaded File:Marlin-250.png
- 16:45, 20 May 2022 CherHubert (talk | contribs) uploaded File:BillesRotules.JPG (Rotules)
- 16:37, 20 May 2022 CherHubert (talk | contribs) uploaded File:Nema17DeltaFold.JPG (Arduino MEGA + RAMPS 1.4 + Drivers moteurs)
- 16:34, 20 May 2022 CherHubert (talk | contribs) uploaded File:AlimentationExterne12v.JPG (Alimentation 12v)
- 16:28, 20 May 2022 CherHubert (talk | contribs) uploaded File:ArduinoRampsDrivers.JPG (Arduino MEGA + RAMPS 1.4 + Drivers moteurs)
- 16:16, 20 May 2022 CherHubert (talk | contribs) uploaded File:EcranLCDGraphique.jpg (Ecran LCD 4x20 caracteres)
- 16:15, 20 May 2022 CherHubert (talk | contribs) uploaded File:EcranLCD 4x20.jpg (Ecran LCD 4x20 caracteres)
- 15:13, 15 May 2022 Alvon3DprinTor (talk | contribs) uploaded File:GA3D M1 c.jpeg (GA3D M1 proto with old electronic)
- 15:12, 15 May 2022 Alvon3DprinTor (talk | contribs) uploaded File:GA3D M1 d.jpeg (GA3D M1 proto)
- 15:11, 15 May 2022 Alvon3DprinTor (talk | contribs) uploaded File:GA3D M1 b.jpeg (GA3D M1 45deg printing mode)
- 15:09, 15 May 2022 Alvon3DprinTor (talk | contribs) uploaded File:GA3D M1 a.jpeg (GA3D M1 classical configuration)
- 06:02, 13 March 2022 Alvon3DprinTor (talk | contribs) uploaded File:GA3Dtech doubledesign table milling.png
- 06:02, 13 March 2022 Alvon3DprinTor (talk | contribs) uploaded File:GA3Dtech doubledesign table lathe.png
- 06:02, 13 March 2022 Alvon3DprinTor (talk | contribs) uploaded File:GA3Dtech doubledesign table laser.png
- 06:00, 13 March 2022 Alvon3DprinTor (talk | contribs) uploaded File:GA3Dtech doubledesign.png
- 06:00, 13 March 2022 Alvon3DprinTor (talk | contribs) uploaded File:GA3Dtech continousprinting.png
- 06:00, 13 March 2022 Alvon3DprinTor (talk | contribs) uploaded File:GA3Dtech base crossed Zposint.png
- 05:59, 13 March 2022 Alvon3DprinTor (talk | contribs) uploaded File:GA3Dtech base crossed CoreXY.png
- 05:59, 13 March 2022 Alvon3DprinTor (talk | contribs) uploaded File:GA3Dtech base.png
- 17:37, 12 March 2022 Ahmedibrahim (talk | contribs) uploaded File:Cairo 3d printer.jpg
- 17:36, 12 March 2022 Ahmedibrahim (talk | contribs) uploaded File:Cairo 3d Printer Front.jpg
- 17:22, 12 March 2022 Ahmedibrahim (talk | contribs) uploaded File:Cairo mini 2.jpg
- 16:50, 12 March 2022 Ahmedibrahim (talk | contribs) uploaded a new version of File:Cairo mini Main.jpg (We are introducing the Cairo Mini 3d-printer)
- 16:50, 12 March 2022 Ahmedibrahim (talk | contribs) uploaded a new version of File:Cairo mini Main.jpg (We are introducing the Cairo Mini 3d-printer)
- 16:48, 12 March 2022 Ahmedibrahim (talk | contribs) uploaded File:Cairo mini Main.jpg (We are introducing the Cairo Mini 3d-printer)
- 17:24, 21 February 2022 Alvon3DprinTor (talk | contribs) uploaded File:GA3D tech designv0.png
- 17:22, 21 February 2022 Alvon3DprinTor (talk | contribs) uploaded File:GA3D tech coreXYcartesiancrossed.png
- 17:11, 21 February 2022 Alvon3DprinTor (talk | contribs) uploaded File:CoreXYcartesiancinematicGA3Dtech.jpeg (CoreXY cartesian cinematic GA3Dtech)
- 13:57, 20 February 2022 Devpsp (talk | contribs) uploaded File:FoldaRap065.jpg
- 08:53, 8 February 2022 Dust (talk | contribs) uploaded File:Shorted.png (Shorted ramps 1.6 pcb)
- 08:36, 8 February 2022 Dust (talk | contribs) uploaded File:ZYLtech logo.png (ZYLtech logo)
- 06:09, 3 December 2021 MrAlvin (talk | contribs) uploaded a new version of File:UltimakerRev3.jpg (testing some white space to the right of the picture)
- 06:05, 3 December 2021 MrAlvin (talk | contribs) uploaded a new version of File:UltimakerRev3.jpg (Reverted to version as of 11:58, 22 September 2011 (EDT))
- 06:04, 3 December 2021 MrAlvin (talk | contribs) uploaded a new version of File:UltimakerRev3.jpg (testing some padding on the right of the picture)
- 05:07, 3 December 2021 MrAlvin (talk | contribs) uploaded File:UltimakerRev3-thumb.jpg
- 22:28, 24 October 2021 Timschmidt (talk | contribs) uploaded File:1920px-Tri-joint-thumb.png (RepRap Building System / Replimat / Gridbeam tri-joint)
- 03:10, 13 October 2021 Qrp-gaijin (talk | contribs) uploaded a new version of File:Swivel Berth Light.jpg (replace spam with RepRap logo)
- 23:11, 11 October 2021 YuyaoHOJALighting (talk | contribs) uploaded File:Swivel Berth Light.jpg (Swivel Berth Light Product Detail • Highly polished solid brass material, available in finishes of TiN plated (golden color) , Chrome Plated and Brass Lacquered • Smaller and lighter design than traditional reading light makes it more attractive a...)
- 08:38, 30 September 2021 Caddeziners (talk | contribs) uploaded File:3d Scanning Services.jpeg (CADDeziners are one of the best 3D scanning services and printing service providers in Melbourne, Perth, Brisbane, Sydney. We offer quality 3d laser scanning services at best prices all over Australia. Hire us)
- 13:23, 8 July 2021 JC Orozco (talk | contribs) uploaded File:20210707 113017 RobotPullstring1.jpg
- 13:22, 8 July 2021 JC Orozco (talk | contribs) uploaded File:20210708 111725 RobotsCranes2.jpg
- 13:17, 8 July 2021 JC Orozco (talk | contribs) uploaded File:20210707 113001 RobotsCranes1.jpg
- 17:21, 30 May 2021 MrAlvin (talk | contribs) uploaded File:GT2-belt-profile.jpg
- 17:20, 30 May 2021 MrAlvin (talk | contribs) uploaded File:MXL-belt-profile.jpg
- 03:34, 30 May 2021 MrAlvin (talk | contribs) uploaded File:Github-branch-select-button.jpg
- 07:52, 27 April 2021 MrAlvin (talk | contribs) uploaded File:UltimakerHeatBedUpgrade.jpg (Heated bed upgrade image, courtesy of 3dprintwig.com For Complete Review, see: https://www.3dprintwig.com/?p=845)
- 13:39, 9 April 2021 Ctkjose (talk | contribs) uploaded File:Rampsv14 wiring extruderfan.png
- 10:06, 9 April 2021 Ctkjose (talk | contribs) uploaded File:Rampsv14 wiring fan.png
- 12:22, 4 April 2021 Ctkjose (talk | contribs) uploaded File:Reprap psu s360 12V 30A.jpg
- 02:49, 4 April 2021 Ctkjose (talk | contribs) uploaded a new version of File:Reprap sample endstops mech circa 2020.png
- 22:42, 3 April 2021 Ctkjose (talk | contribs) uploaded a new version of File:Rampsv14 wiring endstop w details.png (showing 4 pins and direct)
- 21:49, 3 April 2021 Ctkjose (talk | contribs) uploaded a new version of File:Reprap endstops schem mech.png
- 20:29, 2 April 2021 Ctkjose (talk | contribs) uploaded a new version of File:Rampsv14 wiring motors.png (add magnifier)
- 20:27, 2 April 2021 Ctkjose (talk | contribs) uploaded a new version of File:Rampsv14 wiring motor coils.png (fix colors on pins)
- 20:21, 2 April 2021 Ctkjose (talk | contribs) uploaded File:Rampsv14 wiring motors.png
- 18:20, 2 April 2021 Ctkjose (talk | contribs) uploaded File:Rampsv14 wiring motor coils.png
- 04:39, 2 April 2021 Ctkjose (talk | contribs) uploaded File:Reprap icon soldering.png
- 02:47, 2 April 2021 Ctkjose (talk | contribs) uploaded File:Reprap icon note.png
- 02:40, 2 April 2021 Ctkjose (talk | contribs) uploaded a new version of File:Reprap icon brand.png
- 02:40, 2 April 2021 Ctkjose (talk | contribs) uploaded a new version of File:Reprap icon cog.png
- 02:40, 2 April 2021 Ctkjose (talk | contribs) uploaded a new version of File:Reprap icon tool.png
- 02:38, 2 April 2021 Ctkjose (talk | contribs) uploaded a new version of File:Reprap icon printer.png (dark transparent)
- 02:27, 2 April 2021 Ctkjose (talk | contribs) uploaded File:Reprap icon warn.png
- 02:16, 2 April 2021 Ctkjose (talk | contribs) uploaded a new version of File:Reprap icon printer.png
- 02:13, 2 April 2021 Ctkjose (talk | contribs) uploaded a new version of File:Reprap icon book.png
- 02:11, 2 April 2021 Ctkjose (talk | contribs) uploaded a new version of File:Reprap icon tool.png (transparency)
- 01:05, 2 April 2021 Ctkjose (talk | contribs) uploaded File:Reprap icon bookmark.png
- 01:05, 2 April 2021 Ctkjose (talk | contribs) uploaded File:Reprap icon info.png
- 01:05, 2 April 2021 Ctkjose (talk | contribs) uploaded a new version of File:Reprap icon printer.png (change color to match others)
- 01:03, 2 April 2021 Ctkjose (talk | contribs) uploaded File:Reprap icon printer.png
- 01:03, 2 April 2021 Ctkjose (talk | contribs) uploaded File:Reprap icon book.png
- 01:02, 2 April 2021 Ctkjose (talk | contribs) uploaded File:Reprap icon cog.png
- 01:02, 2 April 2021 Ctkjose (talk | contribs) uploaded File:Reprap icon tool.png
- 01:02, 2 April 2021 Ctkjose (talk | contribs) uploaded File:Reprap icon stop.png
- 01:01, 2 April 2021 Ctkjose (talk | contribs) uploaded File:Reprap icon brand.png
- 18:14, 1 April 2021 Ctkjose (talk | contribs) uploaded File:Reprap endstops schem mech.png
- 17:49, 1 April 2021 Ctkjose (talk | contribs) uploaded a new version of File:Reprap sample endstops mech circa 2020.png (added more detail)
- 15:08, 1 April 2021 Ctkjose (talk | contribs) uploaded a new version of File:Reprap sample endstops mech circa 2020.png (added simple switch and a brief description)
- 13:11, 1 April 2021 Ctkjose (talk | contribs) uploaded File:Reprap limit switch.jpg
- 18:20, 31 March 2021 Ctkjose (talk | contribs) uploaded File:Reprap endstops designs mech.png
- 17:50, 31 March 2021 Ctkjose (talk | contribs) uploaded File:Reprap sample endstops mech circa 2020.png (samples endstops)
- 17:06, 31 March 2021 Ctkjose (talk | contribs) uploaded File:Reprap wiki stop.png
- 16:21, 31 March 2021 Ctkjose (talk | contribs) uploaded File:Reprap wiki warn.png (modern flat icon for warning)
- 14:25, 31 March 2021 Ctkjose (talk | contribs) uploaded File:Rampsv14 wiring hotend.png (hot end wiring)
- 12:58, 31 March 2021 Ctkjose (talk | contribs) uploaded File:Rampsv14 wiring drivers.png
- 12:01, 31 March 2021 Ctkjose (talk | contribs) uploaded File:Rampsv14 wiring endstop w details.png
- 11:59, 31 March 2021 Ctkjose (talk | contribs) uploaded a new version of File:Rampsv14 wiring endstop.png (Reverted to version as of 11:06, 31 March 2021 (EDT))
- 11:56, 31 March 2021 Ctkjose (talk | contribs) uploaded a new version of File:Rampsv14 wiring endstop.png (Reverted to version as of 10:59, 31 March 2021 (EDT))
- 11:06, 31 March 2021 Ctkjose (talk | contribs) uploaded a new version of File:Rampsv14 wiring endstop.png (Added more details of the end stop pins)
- 10:59, 31 March 2021 Ctkjose (talk | contribs) uploaded File:Rampsv14 wiring endstop.png (Illustration of endstops on Ramps 1.4)
- 08:48, 31 March 2021 Ctkjose (talk | contribs) uploaded File:Rampsv14 wiring bed.png (Illustration connection of bed's heater element and bed thermosistor)
- 07:59, 31 March 2021 Ctkjose (talk | contribs) uploaded File:Rampsv14 wiring psu.png (Original illustration for wiring a RAMPS 1.4. Shows Power Supply Connections)
- 17:41, 19 March 2021 Zenfunk (talk | contribs) uploaded File:Batteni3frame.jpg (first frame of the Batten i3)
- 02:38, 10 March 2021 Non-bin (talk | contribs) uploaded File:D1 1.6.jpg (Where to find D1 on RAMPS 1.6)
- 02:34, 10 March 2021 Non-bin (talk | contribs) uploaded File:D1 1.4.jpg (Locating the D1 diode on RAMPS 1.4)
- 18:45, 9 March 2021 CherHubert (talk | contribs) uploaded File:ComparatifNema17.png
- 20:58, 20 January 2021 Dust (talk | contribs) uploaded File:Bltouch gcodes.png (BLtouch gcodes)
- 20:27, 20 January 2021 Dust (talk | contribs) uploaded File:Bltouch plug.png (Bltouch plug)
- 17:08, 19 January 2021 Dust (talk | contribs) uploaded File:Diagpin.png (diag pins)
- 20:36, 14 January 2021 Dust (talk | contribs) uploaded File:Laser options.png
- 18:21, 10 January 2021 CherHubert (talk | contribs) uploaded File:V-Slot.jpg
- 17:52, 10 January 2021 CherHubert (talk | contribs) uploaded a new version of File:DeltaFoldPlan 01.png
- 16:15, 10 January 2021 CherHubert (talk | contribs) uploaded File:DSC06527-FullHD.JPG
- 21:51, 9 January 2021 CherHubert (talk | contribs) uploaded File:DSC03152-FullHD.JPG
- 21:47, 9 January 2021 CherHubert (talk | contribs) uploaded File:P1050014-FullHD.JPG
- 21:46, 9 January 2021 CherHubert (talk | contribs) uploaded File:P1050013-FullHD.JPG
- 21:41, 9 January 2021 CherHubert (talk | contribs) uploaded File:P1050723-FullHD.JPG
- 21:39, 9 January 2021 CherHubert (talk | contribs) uploaded File:P1050722-FullHD.JPG
- 21:35, 9 January 2021 CherHubert (talk | contribs) uploaded File:P1050870-FullHD.JPG
- 21:35, 9 January 2021 CherHubert (talk | contribs) uploaded File:P1050861-FullHD.JPG
- 21:32, 9 January 2021 CherHubert (talk | contribs) uploaded File:P1050007-FullHD.JPG
- 21:26, 9 January 2021 CherHubert (talk | contribs) uploaded File:P1050854-FullHD.JPG
- 21:25, 9 January 2021 CherHubert (talk | contribs) uploaded File:P1050855-FullHD.JPG
- 21:24, 9 January 2021 CherHubert (talk | contribs) uploaded File:P1050833-FullHD.JPG
- 21:17, 9 January 2021 CherHubert (talk | contribs) uploaded File:P1050808-FullHD.JPG
- 21:17, 9 January 2021 CherHubert (talk | contribs) uploaded File:P1050830-FullHD.JPG
- 21:16, 9 January 2021 CherHubert (talk | contribs) uploaded File:P1050831-FullHD.JPG
- 21:16, 9 January 2021 CherHubert (talk | contribs) uploaded File:P1050866-FullHD.JPG
- 21:15, 9 January 2021 CherHubert (talk | contribs) uploaded File:P1050815-FullHD.JPG
- 21:14, 9 January 2021 CherHubert (talk | contribs) uploaded File:P1050816-FullHD.JPG
- 21:14, 9 January 2021 CherHubert (talk | contribs) uploaded File:P1050797-FullHD.JPG
- 20:42, 9 January 2021 CherHubert (talk | contribs) uploaded File:IMG 20160502 152032-FullHD.jpg
- 20:00, 9 January 2021 CherHubert (talk | contribs) uploaded File:DeltaFoldPlan 04.png
- 20:00, 9 January 2021 CherHubert (talk | contribs) uploaded File:DeltaFoldPlan 03.png
- 19:59, 9 January 2021 CherHubert (talk | contribs) uploaded File:DeltaFoldPlan 02.png
- 19:59, 9 January 2021 CherHubert (talk | contribs) uploaded File:DeltaFoldPlan 01.png
- 19:50, 9 January 2021 CherHubert (talk | contribs) uploaded File:Deploiement.jpg
- 19:36, 9 January 2021 CherHubert (talk | contribs) uploaded File:Rendu Assemblage v6 bis.JPG
- 19:33, 9 January 2021 CherHubert (talk | contribs) uploaded File:DeltaFold 01.jpg
- 19:25, 9 January 2021 CherHubert (talk | contribs) uploaded File:DSC05558-FullHD.JPG
- 19:24, 9 January 2021 CherHubert (talk | contribs) uploaded File:DSC05249-FullHD.JPG
- 19:24, 9 January 2021 CherHubert (talk | contribs) uploaded File:DSC05220-FullHD.JPG
- 19:23, 9 January 2021 CherHubert (talk | contribs) uploaded File:DSC05191-FullHD.JPG
- 19:23, 9 January 2021 CherHubert (talk | contribs) uploaded File:DSC05187-FullHD.JPG
- 19:23, 9 January 2021 CherHubert (talk | contribs) uploaded File:DSC05171-FullHD.JPG
- 19:22, 9 January 2021 CherHubert (talk | contribs) uploaded File:DSC05163-FullHD.JPG
- 19:21, 9 January 2021 CherHubert (talk | contribs) uploaded File:DSC05150-FullHD.JPG
- 18:34, 9 January 2021 CherHubert (talk | contribs) uploaded File:IMG 20160111 174834-FullHD.jpg
- 18:34, 9 January 2021 CherHubert (talk | contribs) uploaded File:IMG 20151226 003339-FullHD.jpg
- 18:33, 9 January 2021 CherHubert (talk | contribs) uploaded File:IMG 20150910 145455-FullHD.jpg (Imprimante déployée)
- 18:32, 9 January 2021 CherHubert (talk | contribs) uploaded File:IMG 20150724 110909-FullHD.jpg
- 18:31, 9 January 2021 CherHubert (talk | contribs) uploaded File:IMG 20150724 110949-FullHD.jpg
- 18:31, 9 January 2021 CherHubert (talk | contribs) uploaded File:IMG 20150724 110830-FullHD.jpg (Imprimante pliée)
- 18:30, 9 January 2021 CherHubert (talk | contribs) uploaded File:IMG 20150611 172927-FullHD.jpg (Detail assemblage étoile haute)
- 18:29, 9 January 2021 CherHubert (talk | contribs) uploaded File:IMG 20150724 110034-FullHD.jpg (Detail spool holder)
- 18:29, 9 January 2021 CherHubert (talk | contribs) uploaded File:IMG 20150724 105906-FullHD.jpg (Détail ascenseur)
- 18:28, 9 January 2021 CherHubert (talk | contribs) uploaded File:IMG 20150611 172917-FullHD.jpg (Detail extruder)
- 18:26, 9 January 2021 CherHubert (talk | contribs) uploaded File:IMG 20150508 112213-FullHD.jpg
- 18:06, 9 January 2021 CherHubert (talk | contribs) uploaded File:DeltaFold v1.jpg
- 17:42, 9 January 2021 CherHubert (talk | contribs) uploaded File:PremiereImprimante3D.JPG
- 17:16, 9 January 2021 CherHubert (talk | contribs) uploaded File:MerlinEffector.jpg
- 17:15, 9 January 2021 CherHubert (talk | contribs) uploaded File:SpoolHolder v1.jpg
- 17:13, 9 January 2021 CherHubert (talk | contribs) uploaded File:Extruder v1.jpg
- 17:11, 9 January 2021 CherHubert (talk | contribs) uploaded File:BoitierRAMPS v1.JPG
- 17:10, 9 January 2021 CherHubert (talk | contribs) uploaded File:Extruder v2.jpg
- 17:08, 9 January 2021 CherHubert (talk | contribs) uploaded File:BoitierRAMPS v2.JPG
- 17:06, 9 January 2021 CherHubert (talk | contribs) uploaded File:EffecteurMagnetique v1.jpg
- 17:04, 9 January 2021 CherHubert (talk | contribs) uploaded File:Chariots.JPG
- 17:02, 9 January 2021 CherHubert (talk | contribs) uploaded File:ClapExtruder.jpg
- 17:00, 9 January 2021 CherHubert (talk | contribs) uploaded File:BotierRAMPS v3.JPG
- 16:55, 9 January 2021 CherHubert (talk | contribs) uploaded File:CHACRAS 3Dview.jpg
- 16:53, 9 January 2021 CherHubert (talk | contribs) uploaded File:ClapExtruderDualDrive.jpg
- 16:49, 9 January 2021 CherHubert (talk | contribs) uploaded File:CHACRAS.jpg (Boitier CHACRAS (CherHubert Amazing Case for Ramps-Arduino-Screen))
- 16:37, 9 January 2021 CherHubert (talk | contribs) uploaded File:EffecteurClocheV3-Hexa.jpg
- 15:34, 5 January 2021 Ctkjose (talk | contribs) uploaded a new version of File:Reprap fgdc smart adapter pinout.png (A smaller dimension to fit on page better)
- 10:56, 4 January 2021 Ctkjose (talk | contribs) uploaded File:Reprap fgdc smart adapter pinout.png (Pinout for RepRapDiscount Smart Adapter for Full Display Smart Controller)
- 10:53, 4 January 2021 Ctkjose (talk | contribs) uploaded File:Reprap fgdc pinout.png (Pinout for RepRapDiscount Full Display Smart Controller)
- 14:57, 12 November 2020 Shane Hooper (talk | contribs) uploaded File:Solidcore.jpeg (Solid core corexy printer designed by 3d Distributed in Conroe, TX.)
- 13:48, 11 November 2020 Autoabode (talk | contribs) uploaded File:Duper-3d-assembly2-dwg-v7-600x316.jpg (Affordable and user friendly range of personal and professional 3D Printers & Scanners. Built with cutting edge technology. Designed & conceptualised in India.)
- 02:12, 10 November 2020 Autoabode (talk | contribs) uploaded File:Duper-XL600-540x540.gif (Affordable and user friendly range of personal and professional 3D Printers & Scanners. Built with cutting edge technology. Designed & conceptualised in India.)
- 03:29, 28 October 2020 Rahuljindal (talk | contribs) uploaded File:Custome Services.jpg (Affordable and user friendly range of personal and professional 3D Printers & Scanners. Built with cutting edge technology. Designed & conceptualised in India.)
- 07:37, 26 October 2020 Dedodet (talk | contribs) uploaded File:Dedmroz.jpg (Дед Мороз и Снегурочка)
- 01:01, 20 October 2020 Rahuljindal (talk | contribs) uploaded File:3D Printers & IOT Solutions.jpeg (Affordable and user friendly range of personal and professional 3D Printers & Scanners. Built with cutting edge technology. Designed & conceptualised in India.)
- 17:22, 7 August 2020 Emmanuel (talk | contribs) uploaded File:Folda4.0 Duet.jpg
- 15:22, 18 July 2020 Danielkrah (talk | contribs) uploaded a new version of File:PandaPiV2.5.png (H1 was named wrong)
- 14:51, 18 July 2020 Danielkrah (talk | contribs) uploaded File:PandaPiV2.5.png
- 14:49, 18 July 2020 Danielkrah (talk | contribs) uploaded File:PandaPiV2.png (Panda Pi shield V2)
- 11:21, 3 July 2020 Adrianbowyer (talk | contribs) uploaded File:Duet-development.jpg (Duet development electronics)
- 09:33, 12 June 2020 Davide (talk | contribs) uploaded File:Switch Sonff.jpg
- 09:32, 12 June 2020 Davide (talk | contribs) uploaded File:Power Supply.jpg
- 09:31, 12 June 2020 Davide (talk | contribs) uploaded File:Fan.jpg
- 09:31, 12 June 2020 Davide (talk | contribs) uploaded File:Web server Raspberry Pi 3.jpg
- 09:31, 12 June 2020 Davide (talk | contribs) uploaded File:CPU Arduino Due.jpg
- 09:30, 12 June 2020 Davide (talk | contribs) uploaded File:Support filament.jpg
- 09:30, 12 June 2020 Davide (talk | contribs) uploaded File:Axis X and extruder.jpg
- 09:29, 12 June 2020 Davide (talk | contribs) uploaded File:Axis X.jpg
- 09:28, 12 June 2020 Davide (talk | contribs) uploaded File:Led for Ilumination Axis.jpg
- 09:28, 12 June 2020 Davide (talk | contribs) uploaded File:Double Extruder motor .jpg
- 09:26, 12 June 2020 Davide (talk | contribs) uploaded File:Catenary Z.jpeg
- 09:25, 12 June 2020 Davide (talk | contribs) uploaded File:Plate and Axis Z.jpeg (Plate and axis Z)
- 09:24, 12 June 2020 Davide (talk | contribs) uploaded File:Belt to Y.jpeg (Axis Y Belt)
- 09:23, 12 June 2020 Davide (talk | contribs) uploaded File:Desktop Printer.jpeg (Location Printer)
- 09:18, 12 June 2020 Davide (talk | contribs) uploaded File:QG MPM 3d Printer.jpeg (Electrical Box Printer)
- 01:32, 2 June 2020 Sommypan (talk | contribs) uploaded File:20200601 185927 0000 compress33.jpg (<a href="https://www.thezenpens.com">Read online stories and poems. </a>)
- 03:21, 22 May 2020 XAuraSolarisx (talk | contribs) uploaded File:PolaRA render.png (WIP render for PolaRA)
- 08:54, 20 May 2020 Nikkitoshi (talk | contribs) uploaded File:Carriage-remote-direct-drive.png
- 08:47, 20 May 2020 Nikkitoshi (talk | contribs) uploaded File:Remote-direct-drive.png
- 16:26, 16 May 2020 Emmanuel (talk | contribs) uploaded File:FoldaRapX 18teeh and 14-1 reduction.jpg
- 16:24, 16 May 2020 Emmanuel (talk | contribs) uploaded File:FoldaRapX 1st-test-print.jpg
- 20:24, 10 May 2020 MrAlvin (talk | contribs) uploaded File:UltimakerSpacer.jpg
- 20:23, 10 May 2020 MrAlvin (talk | contribs) uploaded File:UltiSpacer.jpg
- 20:09, 10 May 2020 MrAlvin (talk | contribs) uploaded a new version of File:UltiController10.jpg
- 20:07, 10 May 2020 MrAlvin (talk | contribs) uploaded a new version of File:UltiController10.jpg
- 20:04, 10 May 2020 MrAlvin (talk | contribs) uploaded a new version of File:UltiController10.jpg (Reverted to version as of 20:00, 10 May 2020 (EDT))
- 20:03, 10 May 2020 MrAlvin (talk | contribs) uploaded a new version of File:UltiController10.jpg
- 20:00, 10 May 2020 MrAlvin (talk | contribs) uploaded File:UltiController10.jpg
- 19:25, 10 May 2020 MrAlvin (talk | contribs) uploaded File:UMO-K-type-Thermocouple.png
- 09:57, 9 May 2020 Emmanuel (talk | contribs) uploaded File:FoldaRapX 2020-04-25.jpg
- 09:53, 9 May 2020 Emmanuel (talk | contribs) uploaded File:FoldaRapX 2020-04-19.jpg
- 18:57, 1 May 2020 Davide (talk | contribs) uploaded File:MPM printer.jpeg
- 13:09, 28 April 2020 Thesandshore (talk | contribs) uploaded File:Boat.png
- 01:48, 24 April 2020 Stylecnc (talk | contribs) uploaded File:CNC Machine.jpeg
- 00:24, 24 April 2020 Stylecnc (talk | contribs) uploaded File:Plasma cutter.jpeg
- 00:10, 24 April 2020 Stylecnc (talk | contribs) uploaded a new version of File:Wood lathe.jpeg
- 00:09, 24 April 2020 Stylecnc (talk | contribs) uploaded File:Wood lathe.jpeg
- 23:34, 23 April 2020 Stylecnc (talk | contribs) uploaded File:UV Laser Engraver.jpeg
- 23:33, 23 April 2020 Stylecnc (talk | contribs) uploaded File:Fiber Laser Engraver.jpeg
- 23:31, 23 April 2020 Stylecnc (talk | contribs) uploaded File:CO2 Laser Engraver.jpeg
- 13:14, 26 March 2020 Paolomat (talk | contribs) uploaded File:CoreC.png
- 11:14, 25 March 2020 Danielwalker (talk | contribs) uploaded a new version of File:Cloud3dprint.png (Advanced and Powerful Cloud-based 3D Printing Management Platform. Details- http://www.cloud3dprint.com/)
- 11:12, 25 March 2020 Danielwalker (talk | contribs) uploaded File:Cloud3dprint.png (Advanced and Powerful Cloud-based 3D Printing Management Platform.)
- 06:09, 20 March 2020 Paolomat (talk | contribs) uploaded File:Tavolo.jpeg
- 06:02, 20 March 2020 Paolomat (talk | contribs) uploaded File:WhatsApp Image 2020-03-20 at 11.02.13.jpeg (Picture of Q3d)
- 06:56, 18 March 2020 Kerbetos (talk | contribs) uploaded File:Error reprap.jpeg
- 17:34, 22 February 2020 Freiszel (talk | contribs) uploaded File:17 CoolerFixed.png
- 17:32, 22 February 2020 Freiszel (talk | contribs) uploaded File:16 CoolerFixing.png
- 17:29, 22 February 2020 Freiszel (talk | contribs) uploaded File:15 HotendAndPressingScrewMounted.png
- 17:27, 22 February 2020 Freiszel (talk | contribs) uploaded File:14 HotendAndPressingScrewMounting.png
- 17:23, 22 February 2020 Freiszel (talk | contribs) uploaded File:13 DriversAndConectorFixed.png
- 17:22, 22 February 2020 Freiszel (talk | contribs) uploaded File:12 DriversAndconectorFixing.png
- 17:19, 22 February 2020 Freiszel (talk | contribs) uploaded File:11 FrontToRearMounted.png
- 17:17, 22 February 2020 Freiszel (talk | contribs) uploaded File:10 FrontToRearMounting.png
- 17:12, 22 February 2020 Freiszel (talk | contribs) uploaded File:09 PressingArmsInFrontPanel.png
- 17:10, 22 February 2020 Freiszel (talk | contribs) uploaded File:08 AttachPressingArms.png
- 17:08, 22 February 2020 Freiszel (talk | contribs) uploaded File:07 PressingArmMounted.png
- 17:07, 22 February 2020 Freiszel (talk | contribs) uploaded File:06 PressingArmMounting.png
- 17:00, 22 February 2020 Freiszel (talk | contribs) uploaded File:05 FrontPlateMounted.png
- 16:58, 22 February 2020 Freiszel (talk | contribs) uploaded File:04 FrontPlateMounting.png
- 16:55, 22 February 2020 Freiszel (talk | contribs) uploaded File:03 GearsMounting.png
- 16:54, 22 February 2020 Freiszel (talk | contribs) uploaded File:02 BackPlateMounted.png
- 16:51, 22 February 2020 Freiszel (talk | contribs) uploaded File:01 BackPlateMounting.png
- 14:54, 16 February 2020 Freiszel (talk | contribs) uploaded File:Nema14g2d.png (A Nema14 compact dual drive geared extruder. Motor gear: Modulo 0.5 15 teeth. Drives' gears: Modulo 0.5 69 teeth)
- 05:47, 15 February 2020 MrAlvin (talk | contribs) uploaded File:Fysetec-2130-SPI-forum.jpg
- 05:20, 15 February 2020 MrAlvin (talk | contribs) uploaded File:BTT-2130-V30-SPI.jpg
- 05:19, 15 February 2020 MrAlvin (talk | contribs) uploaded File:BTT-2130-V20-SPI.jpg
- 05:19, 15 February 2020 MrAlvin (talk | contribs) uploaded File:BTT-2130-V11-SPI.jpg
- 04:38, 15 February 2020 MrAlvin (talk | contribs) uploaded File:Mks-2130-SPI.jpg
- 04:25, 15 February 2020 MrAlvin (talk | contribs) uploaded File:TMC2130-SPI-solder-jumper-1.jpeg
- 03:31, 8 February 2020 MrAlvin (talk | contribs) uploaded File:Btt-v12-tmc2209-pinout-top.jpg (BigTreeTech (BTT) V1.2 TMC2209 pinout top view)
- 03:31, 8 February 2020 MrAlvin (talk | contribs) uploaded File:Btt-v11-tmc2209-pinout-top.jpg (BigTreeTech (BTT) V1.1 TMC2209 pinout top view)
- 03:21, 8 February 2020 MrAlvin (talk | contribs) uploaded File:Panucatt-v10-tmc2209-pinout-bot.jpg (Panucatt V1.0 TMC2209 SureStep pinout bottom view)
- 03:19, 8 February 2020 MrAlvin (talk | contribs) uploaded File:Panucatt-v10-tmc2209-pinout-top.jpg (Panucatt V1.0 TMC2209 pinout top view)
- 03:06, 8 February 2020 MrAlvin (talk | contribs) uploaded File:Makerbase-v10-tmc2209-pinout.jpg (makerbase v1.0 TMC2209 pinout)
- 03:03, 8 February 2020 MrAlvin (talk | contribs) uploaded File:Lerdge-v10-tmc2209-pinout.jpg (Lerdge v1.0 TMC2209 pinout)
- 02:58, 8 February 2020 MrAlvin (talk | contribs) uploaded File:Watterott-tmc2209-pinout-1.jpg (watterott-tmc2209-pinout)
- 17:46, 13 January 2020 KonstG (talk | contribs) uploaded File:GLKLN v1.PNG
- 14:40, 4 January 2020 Freiszel (talk | contribs) uploaded File:16 - right view.png
- 14:39, 4 January 2020 Freiszel (talk | contribs) uploaded File:15 - botton view.png
- 14:38, 4 January 2020 Freiszel (talk | contribs) uploaded File:14 - top view.png
- 14:36, 4 January 2020 Freiszel (talk | contribs) uploaded File:13 - front view.png
- 14:28, 4 January 2020 Freiszel (talk | contribs) uploaded File:11 - pressing spring.png
- 14:28, 4 January 2020 Freiszel (talk | contribs) uploaded File:10 - driver grub screws.png
- 14:23, 4 January 2020 Freiszel (talk | contribs) uploaded File:09 - join front&rear.png
- 14:22, 4 January 2020 Freiszel (talk | contribs) uploaded File:08 - fix hotend bracket.png
- 14:21, 4 January 2020 Freiszel (talk | contribs) uploaded File:07 - fix levers & insert bearing.png
- 14:17, 4 January 2020 Freiszel (talk | contribs) uploaded File:06 - levers&bearings.png
- 14:17, 4 January 2020 Freiszel (talk | contribs) uploaded File:05 - rear finished.png
- 14:16, 4 January 2020 Freiszel (talk | contribs) uploaded File:04 - insert 55Tgears.png
- 14:05, 4 January 2020 Freiszel (talk | contribs) uploaded File:03 - insert bearings.png
- 14:04, 4 January 2020 Freiszel (talk | contribs) uploaded File:02 - fix motor&gear.png
- 14:03, 4 January 2020 Freiszel (talk | contribs) uploaded File:01 - Captive nuts.png
- 17:01, 1 January 2020 Freiszel (talk | contribs) uploaded File:G2dExtruder.png
- 17:01, 1 January 2020 Freiszel (talk | contribs) uploaded File:DualDrive.png
- 17:00, 1 January 2020 Freiszel (talk | contribs) uploaded File:B2DExtruder.png
- 12:07, 1 January 2020 Freiszel (talk | contribs) uploaded File:12 - complete set.png
- 11:20, 28 December 2019 Freiszel (talk | contribs) uploaded a new version of File:05 - Jig L.png (Reverted to version as of 08:44, 28 December 2019 (EST))
- 11:19, 28 December 2019 Freiszel (talk | contribs) uploaded a new version of File:05 - Jig L.png (Reverted to version as of 13:26, 27 December 2019 (EST))
- 09:51, 28 December 2019 Freiszel (talk | contribs) uploaded a new version of File:05 - Jig L.png
- 09:45, 28 December 2019 Freiszel (talk | contribs) uploaded a new version of File:06 - Jig base.png
- 09:44, 28 December 2019 Freiszel (talk | contribs) uploaded a new version of File:05 - Jig L.png
- 14:31, 27 December 2019 Freiszel (talk | contribs) uploaded File:16 - Hobbed gears.jpg
- 14:30, 27 December 2019 Freiszel (talk | contribs) uploaded File:15 - Jig second turn.png
- 14:30, 27 December 2019 Freiszel (talk | contribs) uploaded File:14 - Jig first turn.png
- 14:29, 27 December 2019 Freiszel (talk | contribs) uploaded File:13 - Jig detail.png
- 14:29, 27 December 2019 Freiszel (talk | contribs) uploaded File:12 - Jig with tap.png
- 14:29, 27 December 2019 Freiszel (talk | contribs) uploaded File:11 - Jig with bit.png
- 14:28, 27 December 2019 Freiszel (talk | contribs) uploaded File:10 - Jig with washers.png
- 14:28, 27 December 2019 Freiszel (talk | contribs) uploaded File:09 - Jig with gears.png
- 14:27, 27 December 2019 Freiszel (talk | contribs) uploaded File:08 - Jig with screws.png
- 14:27, 27 December 2019 Freiszel (talk | contribs) uploaded File:07 - Material.jpg
- 14:26, 27 December 2019 Freiszel (talk | contribs) uploaded File:06 - Jig base.png
- 14:26, 27 December 2019 Freiszel (talk | contribs) uploaded File:05 - Jig L.png
- 14:25, 27 December 2019 Freiszel (talk | contribs) uploaded File:04 - GroovedGears.jpg
- 14:23, 27 December 2019 Freiszel (talk | contribs) uploaded File:03 - GroovedGear.png
- 00:40, 27 December 2019 Eagletec (talk | contribs) uploaded File:Plasma.jpg (cnc plasma cutting table)
- 00:19, 27 December 2019 Eagletec (talk | contribs) uploaded File:5 axis cnc foam router.jpg (5 axis cnc foam router)
- 00:06, 27 December 2019 Eagletec (talk | contribs) uploaded File:Cnc wood lathe.jpg (cnc wood lathe machine)
- 17:25, 25 December 2019 VDX (talk | contribs) uploaded File:File.php?0,file=1984,filename=10W-RF-CO2-laser.jpg
- 13:37, 24 December 2019 Freiszel (talk | contribs) uploaded File:02 - dimensions.png
- 13:37, 24 December 2019 Freiszel (talk | contribs) uploaded File:01 - TapGear.png
- 13:36, 24 December 2019 Freiszel (talk | contribs) uploaded File:NcutsEquation.png
- 07:52, 21 December 2019 Freiszel (talk | contribs) uploaded File:Hobbed Gear.png (3D Model of Hobbed Drive-Gear)
- 16:47, 6 December 2019 KonstG (talk | contribs) uploaded File:Y Train body.png
- 16:47, 6 December 2019 KonstG (talk | contribs) uploaded File:Wheel holder.png
- 16:47, 6 December 2019 KonstG (talk | contribs) uploaded File:Timing belt holder.png
- 16:46, 6 December 2019 KonstG (talk | contribs) uploaded File:Side panel lead R.png
- 16:46, 6 December 2019 KonstG (talk | contribs) uploaded File:Side panel lead L.png
- 16:46, 6 December 2019 KonstG (talk | contribs) uploaded File:Side panel lead.png
- 16:45, 6 December 2019 KonstG (talk | contribs) uploaded File:Side panel back ass.png
- 16:45, 6 December 2019 KonstG (talk | contribs) uploaded File:Side panel ass.png
- 16:45, 6 December 2019 KonstG (talk | contribs) uploaded File:Side panel.png
- 16:45, 6 December 2019 KonstG (talk | contribs) uploaded File:Power Supply Holder Cap.png
- 16:44, 6 December 2019 KonstG (talk | contribs) uploaded File:Power Supply Holder.png
- 16:44, 6 December 2019 KonstG (talk | contribs) uploaded File:Motor Holder 1.png
- 16:43, 6 December 2019 KonstG (talk | contribs) uploaded File:Front Train.png
- 16:43, 6 December 2019 KonstG (talk | contribs) uploaded File:Front panel.png
- 16:43, 6 December 2019 KonstG (talk | contribs) uploaded File:Extruder Holder.png
- 16:42, 6 December 2019 KonstG (talk | contribs) uploaded File:Extruder Flap.png
- 16:42, 6 December 2019 KonstG (talk | contribs) uploaded File:End Stop holder.png
- 16:42, 6 December 2019 KonstG (talk | contribs) uploaded File:Cross.png
- 16:41, 6 December 2019 KonstG (talk | contribs) uploaded File:Corner RU B.png
- 16:41, 6 December 2019 KonstG (talk | contribs) uploaded File:Corner LU B.png
- 16:41, 6 December 2019 KonstG (talk | contribs) uploaded File:Corner L.png
- 16:41, 6 December 2019 KonstG (talk | contribs) uploaded File:Cap MkB.png
- 16:40, 6 December 2019 KonstG (talk | contribs) uploaded File:Back Train.png
- 16:40, 6 December 2019 KonstG (talk | contribs) uploaded File:Corner B1.png
- 16:38, 6 December 2019 KonstG (talk | contribs) uploaded File:Corner RU F.png
- 16:36, 6 December 2019 KonstG (talk | contribs) uploaded File:Corner LU.png
- 00:25, 6 December 2019 Kc8rwr (talk | contribs) uploaded File:Toyrap rhs.jpg (ToyRap toy 3d printer based on the Mendel90)
- 00:24, 6 December 2019 Kc8rwr (talk | contribs) uploaded File:Toyrap lhs.jpg (ToyRap toy 3d printer based on the Mendel90)
- 00:24, 6 December 2019 Kc8rwr (talk | contribs) uploaded File:Toyrap back.jpg (ToyRap toy 3d printer based on the Mendel90)
- 00:22, 6 December 2019 Kc8rwr (talk | contribs) uploaded File:Toyrap front.jpg (ToyRap toy 3d printer based on the Mendel90)
- 15:11, 4 December 2019 KonstG (talk | contribs) uploaded File:GLKLN CAD1 800.png
- 16:23, 3 December 2019 KonstG (talk | contribs) uploaded File:GLKLN 1 800.jpg
- 17:55, 25 November 2019 Mikejeffs (talk | contribs) uploaded File:Reprapmj rear x rail.jpg (ReprapMJ top half rear view)
- 17:55, 25 November 2019 Mikejeffs (talk | contribs) uploaded File:Reprapmj printed extruder.jpg (ReprapMJ fully printed extruder)
- 17:54, 25 November 2019 Mikejeffs (talk | contribs) uploaded File:Reprapmj left z rack.jpg (ReprapMJ left side and Z rack)
- 17:21, 25 November 2019 Mikejeffs (talk | contribs) uploaded File:Reprapmj front.jpg (Front view of ReprapMJ)
- 21:49, 21 November 2019 Jamesdanielv (talk | contribs) uploaded File:Drawing2revisedv4.png
- 05:09, 20 November 2019 Filaments (talk | contribs) uploaded File:3D Printing Materials Filament and 3d Printer Filament Suppliers.jpeg (Filaments.CA Is a prominent firm that offers a variety of printing products like printers, filaments, and several other accessories. I still remember the day when I realized the need for a reliable Canadian 3D printer filament source, that was the ti...)
- 17:33, 4 November 2019 Sigterm (talk | contribs) uploaded File:RebelII.jpg
- 11:40, 2 November 2019 TomRous (talk | contribs) uploaded File:Rebel II v33.png (Source: http://www.rebelove.org/viewtopic.php?f=11&t=1987)
- 18:47, 21 October 2019 Jamesdanielv (talk | contribs) uploaded File:Drawing3revised.png
- 11:54, 9 October 2019 Jamesdanielv (talk | contribs) uploaded File:PrintrbotCableDrawingexample.png
- 11:32, 9 October 2019 Jamesdanielv (talk | contribs) uploaded File:Drawing2revised.png (updated image)
- 18:12, 3 October 2019 VDX (talk | contribs) uploaded File:5xLM338-driver.jpeg
- 21:49, 29 September 2019 3DPrintingworld (talk | contribs) uploaded File:MULBOT WIRING DIAGRAM-s.png
- 21:32, 29 September 2019 3DPrintingworld (talk | contribs) uploaded File:DL1-06 IDLE PULLEY-S.png
- 21:32, 29 September 2019 3DPrintingworld (talk | contribs) uploaded File:DL1-05 DISPLAY ASSEMBLY-S.png
- 21:32, 29 September 2019 3DPrintingworld (talk | contribs) uploaded File:DL1-04 X-AXIS ASSEMBLY-S.png
- 21:31, 29 September 2019 3DPrintingworld (talk | contribs) uploaded File:DL1-03 BED ASSEMBLY-S.png
- 21:31, 29 September 2019 3DPrintingworld (talk | contribs) uploaded File:DL1-02 Z-AXIS FRAME-S.png
- 21:16, 29 September 2019 3DPrintingworld (talk | contribs) uploaded File:DL1-01 Y-AXIS FRAME-S.png
- 00:01, 26 September 2019 MrAlvin (talk | contribs) uploaded a new version of File:144-schematics-01.jpg (Revision C4)
- 16:15, 19 September 2019 Jamesdanielv (talk | contribs) uploaded File:DaughterboardConnectors.JPG
- 12:33, 17 September 2019 MrAlvin (talk | contribs) uploaded File:Ramps-144-Re-ARM-5V.jpg
- 13:53, 12 September 2019 MrAlvin (talk | contribs) uploaded File:RAMPS144-stepper jumpers-02.jpg
- 13:50, 12 September 2019 MrAlvin (talk | contribs) uploaded File:RAMPS144-stepper jumpers-01.jpg
- 00:04, 5 September 2019 MrAlvin (talk | contribs) uploaded File:RAMPS144C-02.jpg (Revision 1.4.4-C)
- 23:26, 4 September 2019 MrAlvin (talk | contribs) uploaded File:RAMPS144C.jpg (RAMPS 1.4.4C with illustration of location on PCB, and pins designation)
- 23:18, 4 September 2019 MrAlvin (talk | contribs) uploaded a new version of File:RAMPS144.jpg (!.4.4C with illustration of Jumpers and Aux ports PCB location and pin designations)
- 23:15, 4 September 2019 MrAlvin (talk | contribs) uploaded a new version of File:RAMPS144.jpg (Reverted to version as of 23:06, 4 September 2019 (EDT))
- 23:15, 4 September 2019 MrAlvin (talk | contribs) uploaded a new version of File:RAMPS144.jpg (Reverted to version as of 15:25, 29 August 2019 (EDT))
- 23:06, 4 September 2019 MrAlvin (talk | contribs) uploaded a new version of File:RAMPS144.jpg (RAMPS 1.4.4C with jumpers and Aux ports listed)
- 16:01, 1 September 2019 3DPrintingworld (talk | contribs) uploaded File:MULBOT-DL1.jpg (Iso view)
- 13:34, 31 August 2019 Sashka-tar (talk | contribs) uploaded File:RepRap Component Structure Ru.png
- 11:59, 31 August 2019 I-make-robots (talk | contribs) uploaded File:SixiWorkspaceXZ.jpg (XZ workspace of Sixi Robot)
- 11:59, 31 August 2019 I-make-robots (talk | contribs) uploaded File:SixiWorkspaceXY.jpg (XY workspace of Sixi Robot)
- 15:25, 29 August 2019 MrAlvin (talk | contribs) uploaded a new version of File:RAMPS144.jpg (Revision C)
- 14:49, 29 August 2019 MrAlvin (talk | contribs) uploaded a new version of File:144-schematics-01.jpg (Revision C)
- 04:35, 29 August 2019 Stylecnc (talk | contribs) uploaded File:1453040341117459.jpg
- 14:28, 27 August 2019 Jamesdanielv (talk | contribs) uploaded File:Printrbotupgradekitwithprintablepartsside.jpg
- 14:24, 27 August 2019 Jamesdanielv (talk | contribs) uploaded File:IMG 7954.JPG
- 19:53, 26 August 2019 Jamesdanielv (talk | contribs) uploaded File:Printrbotupgradekitwithprintableparts.png
- 01:58, 25 August 2019 Jamesdanielv (talk | contribs) uploaded File:PrototypePrintable pins someDirectional.jpg (proto-type 2,3,4 pin connectors for printrbot project. some are directional for pins like fan, and dc heater connectors.)
- 01:56, 25 August 2019 Jamesdanielv (talk | contribs) uploaded File:PrototypePrintable 26pin Directional.jpg (printable connectors for interfacing the printerbot)
- 11:10, 23 August 2019 Henri Starmans (talk | contribs) uploaded File:Topview poc2.png (Improved orientation of lens.)
- 11:04, 23 August 2019 Henri Starmans (talk | contribs) uploaded File:Sideview poc2.png (Curved side should be orientated to the beam so the sum of refracted and incident angles is minimized.)
- 10:59, 23 August 2019 Henri Starmans (talk | contribs) uploaded a new version of File:Sideview poc.png (fixed lens orientation)
- 10:58, 23 August 2019 Henri Starmans (talk | contribs) uploaded File:Sideviewpoc.png (curved side should be in direction of collimated bundle to minimize sum of incident and refracted ray angles)
- 10:46, 23 August 2019 Henri Starmans (talk | contribs) uploaded File:Jitter.png (The jitter of the scan head is depicted. It might be that the photo-diode is not hit properly or the time window for the photo-diode is too large.)
- 10:35, 23 August 2019 Henri Starmans (talk | contribs) uploaded File:Pocline.jpg (A pixel is 4.65 x 4.65 micrometers. The specification of the scanner can derived from this image.)
- 21:17, 21 August 2019 Jmaker (talk | contribs) uploaded File:Main pins.jpg
- 21:14, 21 August 2019 Jmaker (talk | contribs) uploaded File:BT7272A.jpg
- 21:14, 21 August 2019 Jmaker (talk | contribs) uploaded File:LCD12864 IO.jpg
- 21:13, 21 August 2019 Jmaker (talk | contribs) uploaded File:LCD2004 IO.jpg
- 21:13, 21 August 2019 Jmaker (talk | contribs) uploaded File:Generic LCD.jpg
- 21:12, 21 August 2019 Jmaker (talk | contribs) uploaded File:LCD connector pins.jpg
- 17:23, 2 August 2019 Matej101 (talk | contribs) uploaded File:SKR V1.3.jpg (Image of the SKR board)
- 08:38, 15 July 2019 SHIBUKI3D (talk | contribs) uploaded File:Shibuki delta prototype.jpg (Prototype of SHIBUKI Delta 3D printer.)
- 10:36, 10 July 2019 Gabriele Rossetti (talk | contribs) uploaded File:Gabrostommf2019.jpg