From RepRap
Revision as of 00:55, 10 February 2015 by DavidCary (talk | contribs) (link to TeeStruder, etc.)
Jump to: navigation, search
Crystal Clear action run.png

Release status: working

Folding 3D printer.
ShareAlike Creative Commons V3 (CC-BY-SA 3.0)
CAD Models
External Link

All information of this page was taken from [2].

You might also want to look at TeeBot . Perhaps some or all of that page should be merged into this page. (Discuss)


TeeBotMax is a RepRap printer. Designed by Emmanuel Adetutu (Aka Teetopsy)

The design is highly inspired by the fantastic FoldaRap and Prusa i3 3D printers.

The files/ build instruction here are provided for you to print, build, experiment and evolve the design how you choose, please share your experiences and modifications and do let me know if you build one.

Thank you for your interest, please be aware and abide by the license all these files for the TeeBotMax folding printer are covered by - Attribution - ShareAlike Creative Commons V3 (CC BY-SA 3.0) - http://creativecommons.org/licenses/by-sa/3.0/

This License is not greatly restrictive at all, so please don't forget to attribute my work and acknowledge the work by others that this is built on.

Many open source designed 3D printer have inspired the design of TeeBotMax. Many thanks for sharing: to all the open source developers worldwide over.

    • Special thanks to - Josef Prusa (Prusa I3), Emmanuel Gilloz (FoldaRap), Richard Horne (Richrap), Reifsnyderb (J head Hotend) just to mention a few.

If you wish to say hello or source your parts/kits from me (In The Netherlands) see my Blog here - [3]

Watch me on YouTube - https://www.youtube.com/watch?v=Mo2O-83_jfQ

Please see www.reprap.org for information about the RepRap Project. Please visit the RepRap forum - http://forums.reprap.org/

Many thanks, Teebot max.jpg


TeeBotMax folded.JPG


Assembly guides, sourcing and pictorial information will be available on http://tutuemma.wordpress.com/3d-stuffs/teebotmax/

STL files : see also the github repo here [4]

Almost any RepRap extruder can be mounted on TeeBotMax with little or no adaptation. The original TeeBotMax prototype used a TeeStruder. (Some extruders are designed to fit the Vertical X Axis Standard; what's the easiest way to mount them on a TeeBotMax?)