|Date||Material(s)||Shape/Delivered||Thickness (mm)||Measured thickness (mm)||Quantity||Delivered amount||Costs (kg)||Costs (Meter)||Destination & shipping costs||Rating 0-10||Additional notes & Signed by|
|date||ABS HDPE PE PLAPolyamide (aka "Nylon") PP PVC||shape||Xmm||Ymm||Zkg||???kg||xyz/kg||-||shipping||x/10||Notes|
|June 2013||PLA||filament on spool, wrapped, with desiccant and in a bag||1,75 & 3||2,94||1kg||1Kg||$29/kg||-||shipping||1/10||
Good: • one of the cheapest supplier in Europe • 0,05mm diameter variation for the 3mm PLA
Bad: • spool holes are too small for both Replicators and Ultimakers • PLA does not stick to 3M's blue painters' tape 2090 • unknown melting temperature, 210°C works but bridges sag a lot • creates dark brown goo (burned sugar) around the heat block • probably not natureworks ingeo • individual bags opened or poorly sealed -CornGolem. • Does stick very bad to heated glass bed and captain tape as well. -dkcookie.