File:Arduinomegapololushieldboardbothsides.png

From RepRap
Jump to: navigation, search
Original file(1,211 × 635 pixels, file size: 72 KB, MIME type: image/png)

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current03:59, 4 January 2011Thumbnail for version as of 03:59, 4 January 20111,211 × 635 (72 KB)Johnnyr (talk | contribs)1.2
20:02, 30 September 2010Thumbnail for version as of 20:02, 30 September 20101,220 × 642 (250 KB)Johnnyr (talk | contribs)1.1c
14:20, 29 July 2010Thumbnail for version as of 14:20, 29 July 20101,252 × 649 (242 KB)Johnnyr (talk | contribs)Changed ms resistor values, added pull down resistors on mosfets, removed second extruder stepper driver, freed special pins, and broke out extra pins
22:12, 6 July 2010Thumbnail for version as of 22:12, 6 July 20101,396 × 674 (207 KB)Johnnyr (talk | contribs)Moved back to one board :) Optimized traces and clearances for production on RepRaps :)
21:22, 8 June 2010Thumbnail for version as of 21:22, 8 June 20101,396 × 674 (73 KB)Johnnyr (talk | contribs)Redrawn to be one sided :)
18:53, 10 May 2010Thumbnail for version as of 18:53, 10 May 20101,396 × 674 (126 KB)Johnnyr (talk | contribs)add power jack so 12v can enter through shield instead of mega board
17:54, 2 May 2010Thumbnail for version as of 17:54, 2 May 2010699 × 338 (54 KB)Johnnyr (talk | contribs)
  • You cannot overwrite this file.

Metadata