File:Prototype rroofl electronics.jpg

From RepRap
Jump to: navigation, search
Original file ‎(2,048 × 1,536 pixels, file size: 1.57 MB, MIME type: image/jpeg)

Electronics built from 3xMakerbot V3.3 stepper boards, 1x EasyDriver V4, an old Darwin PWM driver, an ArduinoMega 1280 clone and a little patch breadboard. No actual motherboard was used.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current23:53, 8 September 2012Thumbnail for version as of 23:53, 8 September 20122,048 × 1,536 (1.57 MB)Vikolliver (talk | contribs)Electronics built from 3xMakerbot V3.3 stepper boards, 1x EasyDriver V4, an old Darwin PWM driver, an ArduinoMega 1280 clone and a little patch breadboard. No actual motherboard was used.
  • You cannot overwrite this file.

The following 2 pages link to this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturerSAMSUNG
Camera modelGT-I5510
Exposure time1/14 sec (0.071428571428571)
F Numberf/2.6
ISO speed rating50
Date and time of data generation2012-09-09 03:47:28
Lens focal length2.78 mm
OrientationNormal
Horizontal resolution72 dpi
Vertical resolution72 dpi
File change date and time2012-09-09 03:47:28
Y and C positioningCentered
Exposure ProgramNormal program
Exif version2.2
Date and time of digitizing2012-09-09 03:47:28
Meaning of each component
  1. Y
  2. Cb
  3. Cr
  4. does not exist
Metering modeCenter weighted average
Supported Flashpix version0,100
Color spacesRGB
Retrieved from "https://reprap.org/mediawiki/index.php?title=File:Prototype_rroofl_electronics.jpg&oldid=65149"