File:Universal Paste Extruder2.jpg

From RepRap
Jump to: navigation, search
Original file ‎(4,000 × 3,000 pixels, file size: 2.37 MB, MIME type: image/jpeg)

Notice how the M4 bars extrude out very far and are not threaded. Consequently, it will slide and nylock nuts can't be attached. Also take note of how there are no M3 bolts to hold up the idler.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current20:41, 13 December 2012Thumbnail for version as of 20:41, 13 December 20124,000 × 3,000 (2.37 MB)Jms6579 (talk | contribs)Notice how the M4 bars extrude out very far and are not threaded. Consequently, it will slide and nylock nuts can't be attached. Also take note of how there are no M3 bolts to hold up the idler.
  • You cannot overwrite this file.

The following page links to this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturerCanon
Camera modelCanon PowerShot ELPH 300HS
Exposure time1/60 sec (0.016666666666667)
F Numberf/2.7
ISO speed rating500
Date and time of data generation07:15, 13 December 2012
Lens focal length4.3 mm
OrientationNormal
Horizontal resolution180 dpi
Vertical resolution180 dpi
File change date and time07:15, 13 December 2012
Y and C positioningCo-sited
Exif version2.3
Date and time of digitizing07:15, 13 December 2012
Meaning of each component
  1. Y
  2. Cb
  3. Cr
  4. does not exist
Image compression mode3
APEX shutter speed5.90625
APEX aperture2.875
APEX exposure bias0
Maximum land aperture2.875 APEX (f/2.71)
Metering modePattern
FlashFlash did not fire, compulsory flash suppression
Rating (out of 5)0
Retrieved from "https://reprap.org/mediawiki/index.php?title=File:Universal_Paste_Extruder2.jpg&oldid=75305"