File list
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 16:05, 20 June 2011 | CupCakeStrap3.jpg (file) |  |
1.48 MB | Updated to correctly represent the machine in question. | 3 |
| 02:23, 19 May 2010 | CupCakeStrap Heated Plate.jpg (file) |  |
830 KB | Handmade 36W heated plate for CupCakeStrap | 1 |
| 15:56, 25 April 2010 | CupCakeStrap Working Directory 042510.zip (file) |  |
638 KB | The april 25th backup of the assorted files. No guarantees that it actually works right now. All files produced with either Inkscape or Autodesk Inventor. | 1 |
| 19:06, 24 April 2010 | SVG-Files.zip (file) | |
43 KB | 1 | |
| 19:04, 24 April 2010 | 1-4in.svg (file) |  |
136 KB | 1 | |
| 19:25, 18 April 2010 | CupCakeStrap2.jpg (file) |  |
1.51 MB | 1 | |
| 01:09, 12 April 2010 | CupCakeStrap Motor Cutout.jpg (file) |  |
2.93 MB | To accomodate a larger stepper motor, changes had to be made. This may or may not be a good thing, we have yet to have any parts fall into the PSU though. | 1 |
| 01:06, 12 April 2010 | CupCakeStrap bearing holders.jpg (file) |  |
3.56 MB | An extra layer of plastic so that the lower Z bearings will not escape, and so that nothing gets in them or what have you. Also, they look neat. | 1 |
| 14:04, 7 April 2010 | CupCakeStrap Original Electronics.jpg (file) |  |
1.27 MB | The original electronics. Note that the incorrect linear regulators and motherboard load resistor have been used, and these were removed. The SD card slot is also missing. | 1 |
| 13:18, 7 April 2010 | CupCakeStrap platform locks.jpg (file) |  |
3.07 MB | CupCakeStrap's Z-platform locks, so that it platform never comes off the Z rods. This is a dangerous modification in case of head-crashes, but saves time and effort in calibration. | 1 |
| 13:16, 7 April 2010 | CupCakeStrap Linear Bearings.jpg (file) |  |
1.15 MB | These are CupCakeStrap's linear bearings, made from copper tube and aluminum rod. They work surprisingly well, though we will lubricate them when the machine is done in order to get the best performance. | 1 |
| 13:14, 7 April 2010 | CupCakeStrap Acrylic Pulleys.jpg (file) |  |
3.66 MB | This picture shows the X stage stepper motor's pulley, made from three layers of 2mm acrylic and one random rubber axle-thing. | 1 |
| 18:08, 3 April 2010 | CupCakeStrap.jpg (file) |  |
1.41 MB | Early March Development Snapshot. Out of date (missing a number of updates as of April 3rd). | 1 |
