File list
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 18:53, 29 November 2011 | Thing tp holder.jpg (file) |  |
130 KB | 1 | |
| 18:44, 29 November 2011 | Thing cable clip.jpg (file) |  |
82 KB | 1 | |
| 18:41, 29 November 2011 | Thing helping hands base.jpg (file) |  |
152 KB | 1 | |
| 18:35, 29 November 2011 | Thing yesno.jpg (file) |  |
27 KB | 1 | |
| 18:33, 29 November 2011 | Thing graphite lattice.jpg (file) |  |
228 KB | 1 | |
| 18:30, 29 November 2011 | Thing diamond lattice.jpg (file) |  |
227 KB | 1 | |
| 18:58, 17 November 2011 | Thing hemostat.jpg (file) |  |
615 KB | 1 | |
| 18:51, 17 November 2011 | Thing filament holder1.jpg (file) |  |
207 KB | 1 | |
| 18:44, 17 November 2011 | Thing xboxesq.jpg (file) |  |
23 KB | 1 | |
| 20:14, 15 November 2011 | Thing recycle concept.jpg (file) |  |
27 KB | 1 | |
| 20:12, 15 November 2011 | Thing pliers real.jpg (file) |  |
81 KB | 1 | |
| 20:10, 15 November 2011 | Thing tire lever.jpg (file) |  |
10 KB | 1 | |
| 20:08, 15 November 2011 | Thing pliers.jpg (file) |  |
207 KB | 1 | |
| 20:06, 15 November 2011 | Thing pen colorizer.jpg (file) |  |
84 KB | 1 | |
| 20:00, 15 November 2011 | Thing theo jansen.jpg (file) |  |
79 KB | 1 | |
| 19:54, 15 November 2011 | Thing ballandsocket.jpg (file) |  |
56 KB | 1 | |
| 19:50, 15 November 2011 | Thing dual MK6 extruder.jpg (file) |  |
45 KB | 1 | |
| 19:44, 15 November 2011 | Thing lathe2.jpg (file) |  |
290 KB | 1 | |
| 19:43, 15 November 2011 | Thing lathe1.jpg (file) |  |
36 KB | 1 | |
| 19:39, 15 November 2011 | Thing pcb vice.jpg (file) |  |
254 KB | 1 | |
| 19:37, 15 November 2011 | Thing univ joint.jpg (file) |  |
1.35 MB | 1 | |
| 18:27, 13 October 2011 | TEDx Logo Printed.jpg (file) |  |
436 KB | 1 | |
| 18:22, 13 October 2011 | TEDxCard2.stl (file) |  |
39 KB | 1 | |
| 18:20, 13 October 2011 | TEDxCard1.stl (file) | |
39 KB | First larger card. Prints 3.25" x 2.4" x 0.09" (4 layers) | 1 |
| 18:26, 15 September 2011 | Lever switch hookup.png (file) |  |
377 KB | 1 | |
| 17:03, 15 September 2011 | Unit White.JPG (file) |  |
4 MB | 1 | |
| 17:03, 15 September 2011 | Unit Green.JPG (file) |  |
3.92 MB | 1 | |
| 17:02, 15 September 2011 | Unit Clear.JPG (file) |  |
4.01 MB | 1 | |
| 17:02, 15 September 2011 | Unit Black.JPG (file) |  |
4.17 MB | 1 | |
| 19:13, 28 April 2011 | Pen holder top.STL (file) | |
58 KB | larger screw holes | 2 |
| 19:13, 28 April 2011 | Pen holder bottom.STL (file) | |
41 KB | larger scew holes | 2 |
| 19:12, 28 April 2011 | Pen holder top.SLDPRT (file) | |
272 KB | 2 | |
| 19:10, 28 April 2011 | Pen holder bottom.SLDPRT (file) | |
236 KB | 2 | |
| 18:52, 28 April 2011 | SR Design Fair2.JPG (file) |  |
4.28 MB | 1 | |
| 18:50, 28 April 2011 | SR Design Fair1.JPG (file) |  |
4.39 MB | 1 | |
| 18:12, 28 April 2011 | Handle.STL (file) | |
16 KB | 1 | |
| 18:11, 28 April 2011 | Handle.SLDPRT (file) | |
143 KB | 1 | |
| 17:52, 28 April 2011 | Z opto alternative.JPG (file) |  |
3.85 MB | 1 | |
| 17:13, 28 April 2011 | Assembled pen holder.JPG (file) |  |
3.64 MB | 1 | |
| 17:05, 28 April 2011 | Pen Holder bottom.JPG (file) |  |
3.54 MB | 1 | |
| 17:01, 28 April 2011 | Pen holder top.JPG (file) |  |
3.69 MB | 1 | |
| 16:49, 28 April 2011 | Nuttblock2.STL (file) | |
18 KB | 1 | |
| 16:48, 28 April 2011 | Lockblock.STL (file) | |
16 KB | 1 | |
| 16:48, 28 April 2011 | Blockbase2.STL (file) | |
38 KB | 1 | |
| 16:47, 28 April 2011 | Bar.STL (file) | |
22 KB | 1 | |
| 16:42, 28 April 2011 | Nuttblock2.SLDPRT (file) | |
204 KB | This is the Solidworks file for the "nuttblock" into which 2 standard 6/32 nuts should fit. This should allow the threaded rod to slide though pushing or pulling on the lockblock oposite it. | 1 |
| 16:39, 28 April 2011 | Lockblock.SLDPRT (file) | |
142 KB | This is the Solidworks file for the "lockblock". This piece is "locked between 2 nylock nuts that are threded onto the main shaft (a 6/32 threaded rod). | 1 |
| 16:35, 28 April 2011 | Diamond linkage.SLDASM (file) | |
173 KB | This is the Assembly Solidworks file for what the final product should look like. | 1 |
| 16:30, 28 April 2011 | Blockbase2.SLDPRT (file) | |
172 KB | This is the Solidworks file for the base of the Alternative Z-opto holder. | 1 |
| 16:27, 28 April 2011 | Bar.SLDPRT (file) | |
114 KB | This is the Solidworks file for the bar for the Z-opto holder. you would need 4 of these for the completed item. | 1 |
