All public logs
Combined display of all available logs of RepRap. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 19:57, 28 June 2016 LoH (talk | contribs) protected User:LoH [edit=author] (expires 08:00, 1 January 2020 (UTC)) [move=author] (expires 08:00, 1 January 2020 (UTC)) (Covering my arse for my own user page from idiots.) (hist)
- 13:24, 10 December 2015 LoH (talk | contribs) moved page E1x 300x300 VSlot "Fletcher" to E1x-V (Better name for the design)
- 01:20, 4 December 2015 LoH (talk | contribs) uploaded File:2LmyOYj.jpg (Print defect, wavy lines)
- 14:36, 30 August 2015 LoH (talk | contribs) uploaded File:SE1x.JPG
- 23:43, 29 August 2015 LoH (talk | contribs) uploaded File:Fletcherr.jpg
- 23:43, 29 August 2015 LoH (talk | contribs) uploaded File:Fletcher2.jpg
- 23:40, 29 August 2015 LoH (talk | contribs) uploaded File:Fletcher.jpg (photo of Vslot rail printer "Fletcher")
- 04:12, 18 March 2015 LoH (talk | contribs) uploaded File:0Z3M2ab.jpg (E1X build by LoH)
- 01:48, 29 September 2014 LoH (talk | contribs) uploaded File:Heatbed top.jpg (Top view of a nichrome heatbed on an (ab)used circuit board. Note the kapton tape protecting the surface of the board. The scorch marks are from an earlier design that failed. Each heating length is secured by the screws and the loop-end is taped down....)
- 01:44, 29 September 2014 LoH (talk | contribs) uploaded File:Heatbed bottom.JPG (Back of a 12V Nichrome heated bed, showing the ratsnest of connecting wires. Two bolts, secured with nylon clamps, act as the termination block.)
- 01:31, 29 September 2014 User account LoH (talk | contribs) was created
