P3Steel Bill of materials/es
Contents
Proteinas
Pieza | Cantidad | Precio | Precio total |
---|---|---|---|
Endstop Holder | 3 to 6 | -- | -- |
X-Axis Motor end | 1 | -- | -- |
X-Axis idler end | 1 | -- | -- |
X carriage | 1 | -- | -- |
Y belt holder | 1 | -- | -- |
Extruder (*1) | 1 | -- | -- |
(*1): Constructed of several plastic parts that depend of the chosen model
Vitamins
In RepRap jargon, a vitamin (also called an "imported part" or "non-printed part") is anything that you need to make a RepRap, which a RepRap cannot itself make.
Partes mecánicas
Pieza | Cantidad | Precio | Precio total |
---|---|---|---|
Rodamientos lineales LM8UU | 11 | -- | -- |
Rodamientos axiales 608zz | 4 | -- | -- |
Rodamientos axiales otros (pendiente) | -- | -- | -- |
Poleas GT2 | 2 | -- | -- |
Correas GT2 | -- | -- | -- |
Acoplador flexible de 5mm a 5mm | 2 | -- | -- |
Motores paso a paso Nema 17 | 5 | -- | -- |
Varillaje
Varillas roscadas
Debido a su construcción, mayoritariamente en chapa de acero, solo se necesitan 2 varillas roscadas de métrica M5:
- 2x Varilla roscada M5x295 mm
Varillas Lisas
Se necesitan 6 varillas, de los siguientes tamaños:
- 2x Ø8x375 mm para el eje X
- 2x Ø8x341 mm para el eje Y
- 2x Ø8x320 mm para el eje Z
Electronics
Part | Quantity | Unit price | Total cost |
---|---|---|---|
Arduino Mega 2560 board (or compatible) | 1 | -- | -- |
RAMPS 1.4 board | 1 | -- | -- |
Stepper motor drivers. | 4 | -- | -- |
Endstops. | 3 | -- | -- |
Smart LCD | 1(Optional) | -- | -- |
Power supply. | 1 | -- | -- |