Search results

Jump to: navigation, search

Create the page "Useful Software Package" on this wiki! See also the search results found.

  • Diamond Hotend
    ...omputer, download and install version 1.0.x from http://arduino.cc/en/Main/Software. For general info on how to upload firmware onto the motherboard please see === Other slicing software ===
    38 KB (6,232 words) - 12:01, 7 November 2018
  • Blu Bot 1.0
    ! SainSmart Package List ...is makes modifications to these parts through Solidworks (Our 3D Modelling software) fairly difficult as the STL parts do not transfer over well.
    11 KB (1,692 words) - 02:25, 1 May 2015
  • BAM&DICE
    The L6470PD in the heat dissipating POWERSO36 package on this DICE is capable of driving high currents like DICE-STK, also with 1 ...reas. The Module Is controlled via I²C. The error channel also allows the software-checking of the status and the periphery. A solder jumper on the back allow
    12 KB (1,762 words) - 23:50, 10 October 2017
  • Delta Rostock mini G2s
    3D printing Software: Repetier Host download the BOM here [[Media:Delta Rostock mini G2 Package List.pdf]]
    14 KB (2,363 words) - 13:40, 25 January 2016
  • SinapTec AT328.02
    [[File:PCB.brd]] PCB.brd (EagleCAD software design) ...r heat dissipation. The secondary path for heat dissipation is through the package leads and in this aspect the DRV8825 provides for possibly slightly better
    11 KB (1,604 words) - 19:22, 7 July 2017
  • BAM&DICE-DUE
    The L6470PD in the heat dissipating POWERSO36 package on this DICE is capable of driving high currents like DICE-STK, also with 1 ...reas. The Module Is controlled via I²C. The error channel also allows the software-checking of the status and the periphery. A solder jumper on the back allow
    12 KB (1,880 words) - 23:50, 10 October 2017
  • Ramps1.4plus
    ...is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces mix [[Arduino Mega]] with the powerful Ardui ** Verify firmware and host software baud rate matches
    17 KB (2,704 words) - 07:28, 17 January 2022
  • List of electronics/fr
    ...vez télécharger les schémas qui sont développés en utilisant [[Useful Software Packages#gEDA.2Fgaf|gEDA]] depuis github. Vous pouvez les télécharger en * Open Source et conçue par KiCAD, software Open Source EDA
    34 KB (4,975 words) - 03:53, 14 March 2017
  • CAM Toolchains/fr
    {{merge from |Builders/Alternative host software}} {{merge from | Host software Variations }}
    13 KB (1,788 words) - 02:04, 6 June 2020
  • Duex4
    ...Source software package [http://www.kicad-pcb.org/display/KICAD/KiCad+EDA+Software+Suite KiCAD] so hacking and building on this design is accessible to all.<b
    3 KB (519 words) - 07:03, 8 April 2016
  • Duet design
    ...Ethernet and USB interface. The model used on Duet is enclosed in 144 pin package and have 103 I/O pins. The chip driver A4982 use a larger package than the common A4988 and so improve heat transmission to the board. The on
    7 KB (1,189 words) - 06:04, 7 November 2017
  • PCB Milling/ru
    |description = Collection of software helpful for milling PCBs and their application to RepRap =Software suites=
    36 KB (5,791 words) - 05:38, 29 May 2016
  • DuetWifi
    ...Source software package [http://www.kicad-pcb.org/display/KICAD/KiCad+EDA+Software+Suite KiCAD] so hacking and building on this design is accessible to all.<b ==Software==
    9 KB (1,377 words) - 01:16, 9 October 2017
  • RAMPSXB
    Currently, Repetier is the only software that supports 6 extruders, as Marlin is limited to 5. A working version of ! Package
    13 KB (2,092 words) - 17:04, 4 February 2018
  • RAMPSSB
    ...le it does work, it is a bit shakey, and while the hardware is stable, the software cannot be trusted with high precision movements at this time. Anyone with c ! Package
    20 KB (3,476 words) - 15:55, 26 October 2017
  • G-code/ru
    ...ries like mecode give you precise control over the tool path, and thus are useful if you have a complex print that is not suitable for naive slicing. The fin ...es on <code>DELTA</code>) or specified in degrees (SCARA). This command is useful for initialization, diagnostics, and calibration, and should be disabled on
    528 KB (76,267 words) - 05:28, 16 March 2023
  • G-code/ua
    ...ries like mecode give you precise control over the tool path, and thus are useful if you have a complex print that is not suitable for naive slicing. The fin ...es on <code>DELTA</code>) or specified in degrees (SCARA). This command is useful for initialization, diagnostics, and calibration, and should be disabled on
    355 KB (50,562 words) - 03:17, 6 February 2023
  • RAMPS 1.3/ru
    ...is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino MEGA with the powerful Arduino ME You will need the Arduino software at http://www.arduino.cc/en/Main/Software to upload the firmware to Arduino Mega.
    23 KB (3,766 words) - 08:48, 29 October 2018
  • Diamond Hotend/ru
    ...omputer, download and install version 1.0.x from http://arduino.cc/en/Main/Software. For general info on how to upload firmware onto the motherboard please see === Other slicing software ===
    38 KB (6,152 words) - 10:56, 12 November 2018
  • Diamond Hotend/ua
    ...omputer, download and install version 1.0.x from http://arduino.cc/en/Main/Software. For general info on how to upload firmware onto the motherboard please see === Other slicing software ===
    38 KB (6,230 words) - 04:58, 8 November 2018

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)

Retrieved from "https://reprap.org/wiki/Special:Search"