Heated Piezo for Jetting Wax
Release status: experimental
[[image:|center|190px]]
Description | A Piezo design that can be heated for jetting wax.
|
License | GPL
|
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | |
External Link |
Introduction
I'm working on a Stainless Steel piezo that can be heated to jet colored wax. This is to be used as a "Mask" for printed circuit board fabrication.
This process eliminates the need for photo resist and development of a copper clad board. Instead, I use my 3-D printer as a 2-D printer where a board can be placed on my bed and printed directly from Eagle PCB layout software. Then the copper board can be etched and used.
This device can be used for SO many other things besides PC board fabrication. The wax might be able to make 3-D objects but at the very least it can be used to label numbers and letters of your PLA, ABS, or Nylon parts. And an image could be applied to a surface of any 3-D printer device.
no. off | part | picture key | |||||
Ink supplyText 1 Final assemblyText 2 Text 3 Here is a picture of the finished device. ElectronicsElectronics Text Getting it working
|