Welcome! Log In Create A New Profile

Anet A8 - Zonestar Melzi_V3B Board

Posted by Crimzin

Crimzin

Anet A8 - Zonestar Melzi_V3B Board
July 18, 2018 05:09AM

Registered: 5 years ago
Posts: 3

HI All,

I am new to 3D printing and setups.

I would like to start a thread specifically for the Zonestar Melzi_V3B Board (Anet A8 DIY).

I am interested in Firmware locations and update methods.

And also the correct settings for OctoPrint and possible software and plugins you can recommend.

Regards,
Crim in Cape Town

Reply Quote

Crimzin

Re: Anet A8 - Zonestar Melzi_V3B Board
July 30, 2018 10:01AM

Registered: 5 years ago
Posts: 3

Current Screen Load Settings is as follow:

P802M_8_V1.5
P802M_8
Repetier-0.91
ZoneStar 3D Print

Please help point to firmware update site.

Reply Quote

Crimzin

Re: Anet A8 - Zonestar Melzi_V3B Board
July 30, 2018 10:09AM

Registered: 5 years ago
Posts: 3

I have done some mods on the Printer.

power supply to a Corsair VS450 ATX power supply

and added 2 switches and LED lighting.

I am still doing the clean up part.

No heat issues on the power supply at all.

I will also try and hook it up to the OctoPi / OctoPrint to remotely switch on an off.

Reply Quote

Attachments:
open | download - IMG_6126.JPG (591.6 KB)

mau.restor

Re: Anet A8 - Zonestar Melzi_V3B Board
February 22, 2019 03:28PM

Registered: 5 years ago
Posts: 1

Hello, iam new, in fact I am updating this machine, but burn the bootloader and I no longer have backup, could you help me to give your configuration file? I have precisely that machine but I need the configuration to correctly retry the firmware. Help, hot smiley