Re: Capteur inductif conseils September 30, 2015 10:15AM |
Registered: 10 years ago Posts: 277 |
G91 G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure M106 S255 ;turn fan on at 100% to cool hot end. G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way G90 ;absolute positioning G1 Z257 F1000 ; Plateau en position basse G91 ;relative positioning M84 ;steppers off ;Pacman M300 S987 P66 M300 S0 P66 M300 S1975 P66 M300 S0 P66 M300 S2959 P66 M300 S0 P66 M300 S2489 P66 M300 S0 P66 M300 S1975 P66 M300 S2959 P66 M300 S0 P133 M300 S2489 P133 M300 S0 P133 M300 S2093 P66 M300 S0 P66 M300 S4186 P66 M300 S0 P66 M300 S3135 P66 M300 S0 P66 M300 S2637 P66 M300 S0 P66 M300 S4186 P66 M300 S3135 P66 M300 S0 P133 M300 S2637 P133 M300 S0 P133 M300 S987 P66 M300 S0 P66 M300 S1975 P66 M300 S0 P66 M300 S2959 P66 M300 S0 P66 M300 S2489 P66 M300 S0 P66 M300 S1975 P66 M300 S2959 P66 M300 S0 P133 M300 S2489 P133 M300 S0 P133 M300 S2489 P66 M300 S2637 P66 M300 S2793 P66 M300 S0 P66 M300 S2793 P66 M300 S2959 P66 M300 S3135 P66 M300 S0 P66 M300 S3135 P66 M300 S3322 P66 M300 S1760 P66 M300 S0 P66 M300 S1975 P100 ;Fin Pacman M109 R55 ;Wait for Extruder to cool to 55 degC M107 ;turn fan off M81 ;Turn off Power Supply