Programming error - first mismatch at byte 0xf800 October 07, 2011 10:58PM |
Registered: 12 years ago Posts: 20 |
C:\arduino-0022\hardware\tools\avr\bin>avrdude -p atmega644p -C c:\arduino-0022\ hardware\tools\avr\etc\avrdude.conf -c dapa -P lpt1 -U flash:w:\arduino-0022\har dware\Sanguino\bootloaders\atmega644p\ATmegaBOOT_644P.hex avrdude: AVR device initialized and ready to accept instructions Reading | ################################################## | 100% 0.02s avrdude: Device signature = 0x1e960a avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed To disable this feature, specify the -D option. avrdude: erasing chip avrdude: reading input file "\arduino-0022\hardware\Sanguino\bootloaders\atmega6 44p\ATmegaBOOT_644P.hex" avrdude: input file \arduino-0022\hardware\Sanguino\bootloaders\atmega644p\ATmeg aBOOT_644P.hex auto detected as Intel Hex avrdude: writing flash (65382 bytes): Writing | ################################################## | 100% 314.06s avrdude: 65382 bytes of flash written avrdude: verifying flash memory against \arduino-0022\hardware\Sanguino\bootload ers\atmega644p\ATmegaBOOT_644P.hex: avrdude: load data flash data from input file \arduino-0022\hardware\Sanguino\bo otloaders\atmega644p\ATmegaBOOT_644P.hex: avrdude: input file \arduino-0022\hardware\Sanguino\bootloaders\atmega644p\ATmeg aBOOT_644P.hex auto detected as Intel Hex avrdude: input file \arduino-0022\hardware\Sanguino\bootloaders\atmega644p\ATmeg aBOOT_644P.hex contains 65382 bytes avrdude: reading on-chip flash data: Reading | ################################################## | 100% 285.74s avrdude: verifying ... avrdude: verification error, first mismatch at byte 0xf800 0x0c != 0xff avrdude: verification error; content mismatch avrdude: safemode: hfuse changed! Was dc, and is now ff Would you like this fuse to be changed back? [y/n]
Re: Programming error - first mismatch at byte 0xf800 October 07, 2011 11:11PM |
Registered: 12 years ago Posts: 20 |
Re: Programming error - first mismatch at byte 0xf800 October 08, 2011 02:12PM |
Registered: 12 years ago Posts: 35 |
Re: Programming error - first mismatch at byte 0xf800 October 10, 2011 08:48AM |
Registered: 12 years ago Posts: 129 |
Re: Programming error - first mismatch at byte 0xf800 October 12, 2011 03:55AM |
Registered: 12 years ago Posts: 20 |
Re: Programming error - first mismatch at byte 0xf800 October 12, 2011 08:30AM |
Registered: 12 years ago Posts: 129 |
Re: Programming error - first mismatch at byte 0xf800 October 12, 2011 01:51PM |
Registered: 12 years ago Posts: 20 |
Re: Programming error - first mismatch at byte 0xf800 October 12, 2011 02:11PM |
Registered: 12 years ago Posts: 129 |