I'm about changing old Marlin 1.0.6 in 3DP1000 printer with Manta 8P/Klipper because orginal firmware lacks pause macro and filament sensor logic does not work. Have tried this:
[
reprap.org]
but it works only once then loops
Here is original firmware:
[
github.com]
If somone has cfg file for Manta 8P with step/dir pins and LCD on exp1/2 let me know.
I also need to convert steps/mm to rotation distance.
Edited 1 time(s). Last edit at 12/06/2022 04:21AM by jzagaja.
