I'm auctioning off one set of mendel RP parts using the forum.
US shipping only for the set and payment will be made though
paypal (name matching shipping addressee). The auction starts today
4/12 and ends
4/19. The bidding starts at $400 including shipping. I will only accept bids over PM on the forums. There will be an update at least every day with the high bid.
This set was printed on makerbot #170 in ~65% ABS ~35%PLA depending on how large the pieces are. I believe I've solved most of the warping issues, but some maybe noticeable. Likewise, many of the holes are fine as-is, but some will need drilled out. This is still experimental for us as everyone else here.
The parts are the same as on the procurement page spreadsheet with the following exceptions. I've added a "pinch-wheel-bracket-NEMA17_604-bearing_1off",exchanged z-pulleys for
MBC's pulleys, and added
Nophead's Pulleys as an extra.
4/13 Bidding is now at $425; Please make bids in at least $10 increments
4/19 I'm ending the auction at 11:59pm EST I'll contact the winner tomorrow!
[Edit - added country - Sebastien]
Edited 5 time(s). Last edit at 05/20/2010 04:25PM by SebastienBailard.