Welcome! Log In Create A New Profile

Advanced

RedSnapper Questions

Posted by chuckarrow 
RedSnapper Questions
August 10, 2010 10:39AM
I was wondering if anyone else has been using RedSnapper at all. I can't seem to find almost any mention of anyone using it. I have used it a little bit and it seems to be a great program, especially the newly released version. Is there some sort of big problem with this software that i have not yet encountered. I have been waiting for a stronger stepper to arrive before i can do my first real print with RedSnapper, but using my weak stepper i was able to get reasonable results. I would be very interested to hear other peoples experiences with RedSnapper.
Re: RedSnapper Questions
August 10, 2010 08:47PM
I have played with it, its very fast and user friendly, never used the gcode though, Skeinforge has more tweeks and settings at present but as it evolves?.
Re: RedSnapper Questions
August 30, 2010 04:07PM
Where can one download this? I would love to try it out.
Re: RedSnapper Questions
August 31, 2010 10:02AM
I think the search term is 'repsnapper'... p not d.

Al..


[araspitfire.blogspot.com]
Re: RedSnapper Questions
August 31, 2010 10:29AM
Unless you are looking for fish ;-)


[www.hydraraptor.blogspot.com]
Re: RedSnapper Questions
September 02, 2010 10:12AM
Wow, how did i not notice that.

-Adventure here a link to the toolchains page. RepSnapper can be downloaded there
http://reprap.org/wiki/Toolchain

Make sure to download the version in the drivers section. The one is the gcode section does not have the ability to print.
Re: RedSnapper Questions
September 16, 2010 02:53PM
I think something wrong with the G-code output. Its not clear when starts and when stops a segment.

Here is a part of the generated output:
M101
G1 X79.65 Y10.35 Z0.2 F2300
M103
G1 X79.65 Y10.35 Z0.2 F2300
M101
G1 X79.65 Y19.85 Z0.2 F2300
M103
G1 X79.65 Y19.85 Z0.2 F2300
M101
G1 X100.15 Y19.85 Z0.2 F2300
M103
G1 X100.15 Y19.85 Z0.2 F2300
M101
G1 X100.15 Y34.15 Z0.2 F2300
M103
G1 X100.15 Y34.15 Z0.2 F2300
M101
G1 X79.65 Y34.15 Z0.2 F2300
M103
G1 X79.65 Y34.15 Z0.2 F2300
M101
G1 X79.65 Y55.85 Z0.2 F2300
M103
G1 X79.65 Y55.85 Z0.2 F2300
M101
G1 X100.15 Y55.85 Z0.2 F2300
M103
G1 X100.15 Y55.85 Z0.2 F2300
M101
G1 X100.15 Y70.15 Z0.2 F2300
M103
G1 X100.15 Y70.15 Z0.2 F2300
M101
G1 X79.65 Y70.15 Z0.2 F2300
M103
G1 X79.65 Y70.15 Z0.2 F2300
M101
G1 X79.65 Y72.2381 Z0.2 F2300
M103
G1 X79.65 Y72.2381 Z0.2 F2300
M101

From this only each second line is printed.:-(

Thoughts?
Re: RedSnapper Questions
September 17, 2010 02:58AM
Maybe because every other line is identical!


Bob Morrison
W├Ârth am Rhein, Germany
"Luke, use the source!"
BLOG - PHOTOS - Thingiverse
Re: RedSnapper Questions
February 02, 2011 06:53PM
Repsnapper "power on" button? can u make this enable/disable? my extruder steppers get hot when idle, also would like to add to end of Gcode, so when i'm not around to turn off or disable.
Sorry, only registered users may post in this forum.

Click here to login