BL Servo fährt nicht zurück 04. March 2019 08:53 |
Registrierungsdatum: 5 Jahre zuvor Beiträge: 4 |
Re: BL Servo fährt nicht zurück 04. March 2019 13:09 |
Registrierungsdatum: 9 Jahre zuvor Beiträge: 1.610 |
Re: BL Servo fährt nicht zurück 04. March 2019 13:17 |
Registrierungsdatum: 5 Jahre zuvor Beiträge: 4 |
#define Z_SERVO_ANGLES {5,110} // Z Servo Deploy and Stow anglesich habe es in dem endscript auch mit M402 versucht.
Re: BL Servo fährt nicht zurück 04. March 2019 14:21 |
Registrierungsdatum: 9 Jahre zuvor Beiträge: 1.610 |
Re: BL Servo fährt nicht zurück 04. March 2019 16:01 |
Registrierungsdatum: 5 Jahre zuvor Beiträge: 4 |
SENDING:M111 S32 echoEBUG:LEVELING >>> g29 SENDING:G29 current_position=(0.00, 0.00, 0.00) : >>> G29 Machine Type: Cartesian Probe: SERVO PROBE Probe Offset X:-20 Y:-25 Z:-11.15 (Left-Front & Below Nozzle) Auto Bed Leveling: BILINEAR (disabled) current_position=(0.00, 0.00, 0.00) : set_probe_deployed deploy: 1 do_probe_raise(15.00) >>> do_blocking_move_to(0.00, 0.00, 26.15) <<< do_blocking_move_to echo:busy: processing echo:busy: processing echo:busy: processing echo:busy: processing >>> do_blocking_move_to(0.00, 0.00, 26.15) <<< do_blocking_move_to current_position=(0.00, 0.00, 26.15) : bracket_probe_move >>> probe_pt(20.00, 20.00, raise, 0, probe_relative) current_position=(0.00, 0.00, 26.15) : >>> do_blocking_move_to(40.00, 45.00, 26.15) <<< do_blocking_move_to current_position=(40.00, 45.00, 26.15) : set_probe_deployed deploy: 1 current_position=(40.00, 45.00, 26.15) : >>> run_z_probe current_position=(40.00, 45.00, 26.15) : >>> do_probe_move >>> do_blocking_move_to(40.00, 45.00, 9.15) <<< do_blocking_move_to echo:busy: processing echo:busy: processing current_position=(40.00, 45.00, 11.18) : sync_plan_position current_position=(40.00, 45.00, 11.18) : <<< do_probe_move 1st Probe Z:11.18 >>> do_blocking_move_to(40.00, 45.00, 13.18) <<< do_blocking_move_to echo:busy: processing current_position=(40.00, 45.00, 13.18) : >>> do_probe_move >>> do_blocking_move_to(40.00, 45.00, 9.15) <<< do_blocking_move_to current_position=(40.00, 45.00, 11.19) : sync_plan_position current_position=(40.00, 45.00, 11.19) : <<< do_probe_move 2nd Probe Z:11.19 Discrepancy:-0.01 current_position=(40.00, 45.00, 11.19) : <<< run_z_probe >>> do_blocking_move_to(40.00, 45.00, 13.19) <<< do_blocking_move_to echo:busy: processing <<< probe_pt >>> probe_pt(107.00, 20.00, raise, 0, probe_relative) current_position=(40.00, 45.00, 13.19) : >>> do_blocking_move_to(127.00, 45.00, 13.19) <<< do_blocking_move_to current_position=(127.00, 45.00, 13.19) : set_probe_deployed deploy: 1 current_position=(127.00, 45.00, 13.19) : >>> run_z_probe current_position=(127.00, 45.00, 13.19) : >>> do_probe_move >>> do_blocking_move_to(127.00, 45.00, 9.15) <<< do_blocking_move_to current_position=(127.00, 45.00, 11.56) : sync_plan_position current_position=(127.00, 45.00, 11.56) : <<< do_probe_move 1st Probe Z:11.56 >>> do_blocking_move_to(127.00, 45.00, 13.56) <<< do_blocking_move_to echo:busy: processing current_position=(127.00, 45.00, 13.56) : >>> do_probe_move >>> do_blocking_move_to(127.00, 45.00, 9.15) <<< do_blocking_move_to current_position=(127.00, 45.00, 11.57) : sync_plan_position current_position=(127.00, 45.00, 11.57) : <<< do_probe_move 2nd Probe Z:11.57 Discrepancy:-0.01 current_position=(127.00, 45.00, 11.57) : <<< run_z_probe >>> do_blocking_move_to(127.00, 45.00, 13.57) <<< do_blocking_move_to <<< probe_pt >>> probe_pt(194.00, 20.00, raise, 0, probe_relative) current_position=(127.00, 45.00, 13.57) : >>> do_blocking_move_to(214.00, 45.00, 13.57) <<< do_blocking_move_to echo:busy: processing current_position=(214.00, 45.00, 13.57) : set_probe_deployed deploy: 1 current_position=(214.00, 45.00, 13.57) : >>> run_z_probe current_position=(214.00, 45.00, 13.57) : >>> do_probe_move >>> do_blocking_move_to(214.00, 45.00, 9.15) <<< do_blocking_move_to current_position=(214.00, 45.00, 11.50) : sync_plan_position current_position=(214.00, 45.00, 11.50) : <<< do_probe_move 1st Probe Z:11.50 >>> do_blocking_move_to(214.00, 45.00, 13.50) <<< do_blocking_move_to echo:busy: processing current_position=(214.00, 45.00, 13.50) : >>> do_probe_move >>> do_blocking_move_to(214.00, 45.00, 9.15) <<< do_blocking_move_to current_position=(214.00, 45.00, 11.48) : sync_plan_position current_position=(214.00, 45.00, 11.48) : <<< do_probe_move 2nd Probe Z:11.48 Discrepancy:0.02 current_position=(214.00, 45.00, 11.48) : <<< run_z_probe >>> do_blocking_move_to(214.00, 45.00, 13.48) <<< do_blocking_move_to <<< probe_pt >>> probe_pt(194.00, 102.00, raise, 0, probe_relative) current_position=(214.00, 45.00, 13.48) : >>> do_blocking_move_to(214.00, 127.00, 13.48) <<< do_blocking_move_to echo:busy: processing current_position=(214.00, 127.00, 13.48) : set_probe_deployed deploy: 1 current_position=(214.00, 127.00, 13.48) : >>> run_z_probe current_position=(214.00, 127.00, 13.48) : >>> do_probe_move >>> do_blocking_move_to(214.00, 127.00, 9.15) <<< do_blocking_move_to current_position=(214.00, 127.00, 11.48) : sync_plan_position current_position=(214.00, 127.00, 11.48) : <<< do_probe_move 1st Probe Z:11.48 >>> do_blocking_move_to(214.00, 127.00, 13.48) <<< do_blocking_move_to echo:busy: processing current_position=(214.00, 127.00, 13.48) : >>> do_probe_move >>> do_blocking_move_to(214.00, 127.00, 9.15) <<< do_blocking_move_to current_position=(214.00, 127.00, 11.47) : sync_plan_position current_position=(214.00, 127.00, 11.47) : <<< do_probe_move 2nd Probe Z:11.47 Discrepancy:0.00 current_position=(214.00, 127.00, 11.47) : <<< run_z_probe >>> do_blocking_move_to(214.00, 127.00, 13.47) <<< do_blocking_move_to <<< probe_pt >>> probe_pt(107.00, 102.00, raise, 0, probe_relative) current_position=(214.00, 127.00, 13.47) : >>> do_blocking_move_to(127.00, 127.00, 13.47) <<< do_blocking_move_to echo:busy: processing current_position=(127.00, 127.00, 13.47) : set_probe_deployed deploy: 1 current_position=(127.00, 127.00, 13.47) : >>> run_z_probe current_position=(127.00, 127.00, 13.47) : >>> do_probe_move >>> do_blocking_move_to(127.00, 127.00, 9.15) <<< do_blocking_move_to current_position=(127.00, 127.00, 11.51) : sync_plan_position current_position=(127.00, 127.00, 11.51) : <<< do_probe_move 1st Probe Z:11.51 >>> do_blocking_move_to(127.00, 127.00, 13.51) <<< do_blocking_move_to echo:busy: processing current_position=(127.00, 127.00, 13.51) : >>> do_probe_move >>> do_blocking_move_to(127.00, 127.00, 9.15) <<< do_blocking_move_to current_position=(127.00, 127.00, 11.53) : sync_plan_position current_position=(127.00, 127.00, 11.53) : <<< do_probe_move 2nd Probe Z:11.53 Discrepancy:-0.01 current_position=(127.00, 127.00, 11.53) : <<< run_z_probe >>> do_blocking_move_to(127.00, 127.00, 13.53) <<< do_blocking_move_to <<< probe_pt >>> probe_pt(20.00, 102.00, raise, 0, probe_relative) current_position=(127.00, 127.00, 13.53) : >>> do_blocking_move_to(40.00, 127.00, 13.53) <<< do_blocking_move_to echo:busy: processing current_position=(40.00, 127.00, 13.53) : set_probe_deployed deploy: 1 current_position=(40.00, 127.00, 13.53) : >>> run_z_probe current_position=(40.00, 127.00, 13.53) : >>> do_probe_move >>> do_blocking_move_to(40.00, 127.00, 9.15) <<< do_blocking_move_to current_position=(40.00, 127.00, 11.28) : sync_plan_position current_position=(40.00, 127.00, 11.28) : <<< do_probe_move 1st Probe Z:11.28 >>> do_blocking_move_to(40.00, 127.00, 13.28) <<< do_blocking_move_to echo:busy: processing current_position=(40.00, 127.00, 13.28) : >>> do_probe_move >>> do_blocking_move_to(40.00, 127.00, 9.15) <<< do_blocking_move_to current_position=(40.00, 127.00, 11.29) : sync_plan_position current_position=(40.00, 127.00, 11.29) : <<< do_probe_move 2nd Probe Z:11.29 Discrepancy:-0.01 current_position=(40.00, 127.00, 11.29) : <<< run_z_probe >>> do_blocking_move_to(40.00, 127.00, 13.29) <<< do_blocking_move_to <<< probe_pt >>> probe_pt(20.00, 184.00, raise, 0, probe_relative) current_position=(40.00, 127.00, 13.29) : >>> do_blocking_move_to(40.00, 209.00, 13.29) <<< do_blocking_move_to echo:busy: processing current_position=(40.00, 209.00, 13.29) : set_probe_deployed deploy: 1 current_position=(40.00, 209.00, 13.29) : >>> run_z_probe current_position=(40.00, 209.00, 13.29) : >>> do_probe_move >>> do_blocking_move_to(40.00, 209.00, 9.15) <<< do_blocking_move_to current_position=(40.00, 209.00, 11.48) : sync_plan_position current_position=(40.00, 209.00, 11.48) : <<< do_probe_move 1st Probe Z:11.48 >>> do_blocking_move_to(40.00, 209.00, 13.48) <<< do_blocking_move_to current_position=(40.00, 209.00, 13.48) : >>> do_probe_move >>> do_blocking_move_to(40.00, 209.00, 9.15) <<< do_blocking_move_to echo:busy: processing current_position=(40.00, 209.00, 11.47) : sync_plan_position current_position=(40.00, 209.00, 11.47) : <<< do_probe_move 2nd Probe Z:11.47 Discrepancy:0.01 current_position=(40.00, 209.00, 11.47) : <<< run_z_probe >>> do_blocking_move_to(40.00, 209.00, 13.47) <<< do_blocking_move_to <<< probe_pt >>> probe_pt(107.00, 184.00, raise, 0, probe_relative) current_position=(40.00, 209.00, 13.47) : >>> do_blocking_move_to(127.00, 209.00, 13.47) <<< do_blocking_move_to echo:busy: processing current_position=(127.00, 209.00, 13.47) : set_probe_deployed deploy: 1 current_position=(127.00, 209.00, 13.47) : >>> run_z_probe current_position=(127.00, 209.00, 13.47) : >>> do_probe_move >>> do_blocking_move_to(127.00, 209.00, 9.15) <<< do_blocking_move_to current_position=(127.00, 209.00, 11.43) : sync_plan_position current_position=(127.00, 209.00, 11.43) : <<< do_probe_move 1st Probe Z:11.43 >>> do_blocking_move_to(127.00, 209.00, 13.43) <<< do_blocking_move_to current_position=(127.00, 209.00, 13.43) : >>> do_probe_move >>> do_blocking_move_to(127.00, 209.00, 9.15) <<< do_blocking_move_to echo:busy: processing current_position=(127.00, 209.00, 11.41) : sync_plan_position current_position=(127.00, 209.00, 11.41) : <<< do_probe_move 2nd Probe Z:11.41 Discrepancy:0.02 current_position=(127.00, 209.00, 11.41) : <<< run_z_probe >>> do_blocking_move_to(127.00, 209.00, 13.41) <<< do_blocking_move_to <<< probe_pt >>> probe_pt(194.00, 184.00, raise, 0, probe_relative) current_position=(127.00, 209.00, 13.41) : >>> do_blocking_move_to(214.00, 209.00, 13.41) <<< do_blocking_move_to echo:busy: processing current_position=(214.00, 209.00, 13.41) : set_probe_deployed deploy: 1 current_position=(214.00, 209.00, 13.41) : >>> run_z_probe current_position=(214.00, 209.00, 13.41) : >>> do_probe_move >>> do_blocking_move_to(214.00, 209.00, 9.15) <<< do_blocking_move_to current_position=(214.00, 209.00, 11.31) : sync_plan_position current_position=(214.00, 209.00, 11.31) : <<< do_probe_move 1st Probe Z:11.31 >>> do_blocking_move_to(214.00, 209.00, 13.31) <<< do_blocking_move_to current_position=(214.00, 209.00, 13.31) : >>> do_probe_move >>> do_blocking_move_to(214.00, 209.00, 9.15) <<< do_blocking_move_to echo:busy: processing current_position=(214.00, 209.00, 11.31) : sync_plan_position current_position=(214.00, 209.00, 11.31) : <<< do_probe_move 2nd Probe Z:11.31 Discrepancy:0.00 current_position=(214.00, 209.00, 11.31) : <<< run_z_probe >>> do_blocking_move_to(214.00, 209.00, 13.31) <<< do_blocking_move_to <<< probe_pt current_position=(214.00, 209.00, 13.31) : set_probe_deployed deploy: 0 do_probe_raise(15.00) >>> do_blocking_move_to(214.00, 209.00, 26.15) <<< do_blocking_move_to echo:busy: processing echo:busy: processing >>> do_blocking_move_to(214.00, 209.00, 26.15) <<< do_blocking_move_to current_position=(214.00, 209.00, 26.15) : > probing complete Extrapolate [ 1+ 1+] (done) Extrapolate [ 1- 1+] (done) Extrapolate [ 1+ 1-] (done) Extrapolate [ 1- 1-] (done) Extrapolate [ 1+ 0+] (done) Extrapolate [ 1- 0+] (done) Extrapolate [ 1+ 2-] (done) Extrapolate [ 1- 2-] (done) Extrapolate [ 0+ 1+] (done) Extrapolate [ 2- 1+] (done) Extrapolate [ 0+ 1-] (done) Extrapolate [ 2- 1-] (done) Extrapolate [ 0+ 0+] (done) Extrapolate [ 2- 0+] (done) Extrapolate [ 0+ 2-] (done) Extrapolate [ 2- 2-] (done) Bilinear Leveling Grid: 0 1 2 0 +0.037 +0.413 +0.340 1 +0.135 +0.372 +0.323 2 +0.324 +0.270 +0.163 G29 uncorrected Z:26.15 corrected Z:25.99 Z Probe End Script: G1 Z10 F12000 G1 X15 Y330 G1 Z0.5 G1 Z10 current_position=(214.00, 209.00, 25.99) : bracket_probe_move <<< G29 current_position=(214.00, 209.00, 25.99) : sync_plan_position echo:enqueueing "G1 Z10 F12000" echo:enqueueing "G1 X15 Y330" echo:enqueueing "G1 Z0.5" echo:enqueueing "G1 Z10" echo:busy: processing echo:busy: processing
current_position=(0.00, 0.00, 0.00) : set_probe_deployed deploy: 1 do_probe_raise(15.00)
Re: BL Servo fährt nicht zurück 05. March 2019 09:57 |
Registrierungsdatum: 9 Jahre zuvor Beiträge: 1.610 |
Hier sollte der Servo zurückfahren:
current_position=(214.00, 209.00, 13.31) : set_probe_deployed
deploy: 0
do_probe_raise(15.00)
Kannst Du eventuelle Unterschiede in der configuration.h nicht ermitteln?Quote
Ku4e
Interessant ist auch das ich das schon mal getestet hatte und es damals auch funktioniert hat.
Re: BL Servo fährt nicht zurück 10. March 2019 06:32 |
Registrierungsdatum: 5 Jahre zuvor Beiträge: 4 |