Welcome! Log In Create A New Profile

Advanced

Printing never starts

Posted by Andico 
Printing never starts
January 13, 2023 08:35AM
Hello everyone,

when I start prtinting with my machine it remains stuck at home without never moving. It is the first time I'm going through such a problem and I really don't have a clue how to fix it.
I use Ultimaker cura both for slicing and controlling and I noticed that temperature swing around the set-temperature all the time. This happens both for the extruder and the bed. The G-code for M166 has already been removed.
Can I please pick your brain for a moment?

Printer: Prusa I3

Warm regards

Edited 1 time(s). Last edit at 01/13/2023 11:22AM by Andico.
Re: Printing never starts
January 18, 2023 07:32AM
Hi, some things you can try:
Check the voltage: My Ender has also this issue sometimes when the voltage is too low.
Start PID tune test, depending on what firmware your printer is running on:
Marlin PID guide
Klipper PID guide
Reflash the firmware.
Check the extruder (nozzle).

Hope this help.

Greetings
Sorry, only registered users may post in this forum.

Click here to login