Repetier Host homing question

Hi all,
Home button work after startup printer . X home , Y home or Z home works everytime . When pushing home after startup then doing something on printer (shift extruder by hand, fixing someting etc..) then push home button printer doesnt check X endstop but Y and Z endstop ok. its looks like printer calculate x distance after first homing then goest that distance but it should be check X endstop , isnt it ? Is this bug or firmware/host software works like that ? OR my endstop sometimes gives wrong signal.

Thanks for your comment

Edited 3 time(s). Last edit at 05/14/2013 10:21AM by delibaykus.

Printer doesnt itarate regularly that event , Its look sometimes my X endstop makes wrong signal

Edited 1 time(s). Last edit at 05/14/2013 10:35AM by delibaykus.

You can define if end-stops should be checked every time or only on homing moves.

If you have the end-stop cables near you motor cables make sure to drill the motor-cables to prevent cross talk and thus wrong end stop signals.

---

Repetier-Software - the home of Repetier-Host (Windows, Linux and Mac OS X) and Repetier-Firmware.
Repetier-Server - the solution to control your printer from everywhere.
Visit us on Facebook and Twitter!

Thanks Repetier , i changed endstop position then solved . Endstop was near stepper .