SmartCore ALU
Posted by Zlob
|
SmartCore ALU September 10, 2015 09:59AM |
Registered: 9 years ago Posts: 65 |
|
Re: SmartCore ALU September 10, 2015 06:31PM |
Registered: 11 years ago Posts: 25 |
|
Re: SmartCore ALU September 11, 2015 02:43AM |
Registered: 9 years ago Posts: 107 |
|
Re: SmartCore ALU September 11, 2015 09:26PM |
Registered: 11 years ago Posts: 4 |
|
Re: SmartCore ALU September 13, 2015 04:48AM |
Registered: 9 years ago Posts: 44 |
For all who want 8mm rod sized parts for the Smartrapcore standard version, feel free to get the seperate stl files of the remix I just uploaded:
Smartrapcore standard - 8mm rods - 13mm walls:
http://www.thingiverse.com/thing:1012539
The parts without '_HK13mm' in the name are also usable for the ALU design!
Smartrapcore standard - 8mm rods - 13mm walls:
http://www.thingiverse.com/thing:1012539
The parts without '_HK13mm' in the name are also usable for the ALU design!
|
Re: SmartCore ALU September 13, 2015 11:21AM |
Registered: 10 years ago Posts: 814 |
|
Re: SmartCore ALU September 13, 2015 01:35PM |
Registered: 9 years ago Posts: 44 |
|
Re: SmartCore ALU September 14, 2015 01:57AM |
Registered: 10 years ago Posts: 814 |
|
Re: SmartCore ALU September 14, 2015 04:45AM |
Registered: 11 years ago Posts: 25 |
Just a few comments to the onshape parts:
1: The small M3 holes should be a bit smaller, it's too easy to overtighten the screw and then damage the "thread"
2; The fan duct is missing from the standard_plates. Again smaller holes here for M3-screws instead of the fan mounting with screw and nut.
(Slowly climbing up the onshape learning curve :-)
1: The small M3 holes should be a bit smaller, it's too easy to overtighten the screw and then damage the "thread"
2; The fan duct is missing from the standard_plates. Again smaller holes here for M3-screws instead of the fan mounting with screw and nut.
(Slowly climbing up the onshape learning curve :-)
|
Re: SmartCore ALU September 14, 2015 05:50AM |
Registered: 9 years ago Posts: 44 |
Mike, I am at work currently and do not have them at hand.
When you search in Onshape on my user name or smartfriendz, you should be able to find my copy. It is public as well.
The files that I have changed are last, ending with _8mm and _8mm_HK13.
Edited 1 time(s). Last edit at 09/14/2015 05:52AM by 3DFreezeMe.
When you search in Onshape on my user name or smartfriendz, you should be able to find my copy. It is public as well.
The files that I have changed are last, ending with _8mm and _8mm_HK13.
Edited 1 time(s). Last edit at 09/14/2015 05:52AM by 3DFreezeMe.
|
Re: SmartCore ALU September 15, 2015 05:24AM |
Registered: 11 years ago Posts: 25 |
The new y-slides makes the x-axis 30mm shorter than the old one..
The upper lm6uu holder on the head is a bit too loose.
When measuring on the stl the width is 12.4mm the hole bottom hole is 12.2mm and gives a tight fit with my printer.
Just found out the hard way :-(
Edited 1 time(s). Last edit at 09/15/2015 05:49AM by oz9ny.
The upper lm6uu holder on the head is a bit too loose.
When measuring on the stl the width is 12.4mm the hole bottom hole is 12.2mm and gives a tight fit with my printer.
Just found out the hard way :-(
Edited 1 time(s). Last edit at 09/15/2015 05:49AM by oz9ny.
|
Re: SmartCore ALU October 03, 2015 06:40AM |
Registered: 11 years ago Posts: 25 |
Sorry, only registered users may post in this forum.