Welcome! Log In Create A New Profile

Advanced

My CoreXY Design

Posted by Taz-dig 
My CoreXY Design
August 09, 2015 09:54PM
I have built a delta machine and did not like the results that I got so I disassembled that machine and started to build a corexy. I really like the design and concept of a corexy machine. Here are some pictures. If all works well, I will upload the files for the machine. I am using the makerslide for the linear rails.

Edited 1 time(s). Last edit at 08/09/2015 09:55PM by Taz-dig.
Attachments:
open | download - corexy1.jpg (164.4 KB)
open | download - corexy2.jpg (138.4 KB)
open | download - corexy3.jpg (129.6 KB)
Re: My CoreXY Design
August 24, 2015 08:01PM
Here is a test run with the x and y access
[1drv.ms]
Re: My CoreXY Design
October 22, 2015 12:05AM
Hello!, great desing, on the video it shows you are using spectra line but on one of the pictures if shows a motor with a belt pulley, did you change from belts to spectra o from spectra to belts ? Why?
Re: My CoreXY Design
October 27, 2015 10:47PM
I went to spectra line instead of the belt. I have both and wanted to try the specra line. I have not put the belt on and have continued to use the specra line. I have been travelling over seas lately and have not been able to be back to the build. From my testing, the specra line will be able to do the speeds that I am hoping for with no worries about slipping. Please let me know if this answers your questions.
Sorry, only registered users may post in this forum.

Click here to login