I am consistently getting an error at the end of my prints which kills the print. The log for the error looks like this:
Quote
Resend: 74166
Error:No Checksum with line number, Last Line: 74165
[ERROR] Error:No Checksum with line number, Last Line: 74165
Resend: 74166
and so on, ad infinitum.....
The problem consistently happens with 6 lines of G1 commands left to run, and the printer head hangs up on the (*almost* complete) model at temperature, creating a wart on my print which ruins the print.
Here is an image showing the error, and three examples of g-code showing where the print failed:
https://www.dropbox.com/s/vanv743fyjxip9s/Checksum%20error%20Screen%20Shot.png?dl=0
This is a new problem, and the only thing that I can figure that I did to change things was to add the "Eject" command at the end of the g-code, but I don't see how that could cause this....
Any speculation on what might be causing this?
_______
Makerfront i3pro XL
Slic3r
Printrun-Mac-03Feb2015