May it be true that there are several different Fisher delta models. have big problems finding stl files for printing. such as Motor bracket and Carriage.
Everyone I have worked out is wrong. too narrow. including all files on emaker.

have found very little on the thingiverse .. Hope in can help ..


Sorry . google translate ..

Try here: [github.com]

The Motor Bracket is part 1305
& the Carriage is part 1304

These are from the original design files from RepRapPro via eMAKER.

Best wishes
Sally

RepRap Ltd

The following list is STL parts (for printing) are in theFisher/stl folder.

# Description Qty Location

1243.1 Idler 3 Fisher/stl
1245 Kinematic Mount 3 Fisher/stl
1247.1 Nozzle Duct 1 Fisher/stl
1249 Spigot 1 Fisher/stl
1285 Idler bracket 3 Fisher/stl
1301 Effector 1 Fisher/stl
1304 Carriage 3 Fisher/stl
1305 Motor bracket 12 Fisher/stl
1306 Drive block 1 geared-extruder-drive/stl
1307 Drive block spacer (printable version) 1 geared-extruder-drive/stl[/b
1308 Upper Lever (printable version} 1 geared-extruder-drive/stl
1309 Lower Lever 1 geared-extruder-drive/stl
1310 Small gear 1 geared-extruder-drive/stl
1311 Large gear 1 geared-extruder-drive/stl
1320 Tongue 1 geared-extruder-drtive/stl

Still haven't found the stl files .. have printed 100 different stl files. nobody fits my fisher
no files from [github.com] fits on my fisher
understand nothing. Strange they didn't fit my printer

How do you convert an STL parts for Fisher into a G code file, just using RepRap Documentation ?j

Well...

If you don't know such an absolut basic information, you probably should read a lot more about 3D-Printing before starting anything.


The Software you are searching for is called a slicer. There are quite a lot of them - e.g. Cura, Slic3r, Slic3r Prusa, Kisslicer, craftware, simplify3d,....

Hi Dancer, Thanks for your information on Slicers. I have tried a few from your list. I find that "Cura" is the best. Slic3r gives stringy results when printed. At the moment I have problems downloading Cura ! I will try some of the other Slicers in your list. Thanks.